Novel applications of VDVTA: as current-mode SIMO-type biquad and electronically controllable sinusoidal oscillator

2015 ◽  
Vol 8 ◽  
pp. 1383-1391 ◽  
Author(s):  
Javed Ahmad ◽  
Dinesh Prasad
Keyword(s):  
Current Mode ◽  
Sinusoidal Oscillator ◽  
Novel Applications ◽  
Electronically Controllable

scholarly journals Electronically Controllable Explicit Current Output Sinusoidal Oscillator Employing Single VDTA

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Dinesh Prasad ◽  
D. R. Bhaskar
Keyword(s):  
Current Mode ◽  
Frequency Stability ◽  
Good Frequency ◽  
View Point ◽  
Current Output ◽  
Transconductance Amplifier ◽  
Sinusoidal Oscillator ◽  
Condition Of Oscillation ◽  
Ready Availability ◽  
Electronically Controllable

A new current-mode sinusoidal oscillator employing a single voltage differencing transconductance amplifier (VDTA), two grounded capacitors, and one grounded resistor has been proposed. The proposed sinusoidal oscillator offers the following advantageous features: (i) use of grounded capacitors which are attractive from the view point of IC implementation as well as eliminating/accommodating parasitic capacitances, (ii) independent control of frequency of oscillation and condition of oscillation, (iii) ready availability of explicit current-mode output, (iv) low active and passive sensitivities, and (v) a very good frequency stability. The workability of the proposed configuration has been established by PSPICE simulations.

scholarly journals A Current Mode Universal Filter and a Single Resistance Controlled Oscillator Employing only Grounded Passive Elements: Applications of VDCC

2021 ◽  
Vol 25 (2) ◽  
pp. 65-76
Author(s):  
Tajinder Singh Arora ◽  
Keyword(s):  
Integrated Circuit ◽  
Current Mode ◽  
Paper Analysis ◽  
Current Conveyor ◽  
Universal Filter ◽  
Dual Mode ◽  
Passive Element ◽  
Research Article ◽  
Sinusoidal Oscillator ◽  
A Current

This research article explores the possible applications of voltage differencing current conveyor (VDCC), as a current mode universal filter and a sinusoidal oscillator. Without the need for an additional active/passive element, a very simple hardware modification makes it a dual-mode quadrature oscillator from the filter configuration. Both the proposed circuit requires only two VDCC and all grounded passive elements, hence a preferable choice for integration. The filter has some desirable features such as availability of all five explicit outputs, independent tunability of filter parameters. Availability of explicit quadrature current outputs, independence in start and frequency of oscillations, makes it a better oscillator design. Apart from prevalent CMOS simulation results, VDCC is also realized and experimentally tested using the off-the-shelf integrated circuit. All the pen and paper analysis such as non-ideal, sensitivity and parasitic analysis supports the design.

An Active-C Current-Mode Universal First-Order Filter and Oscillator

2019 ◽  
Vol 28 (13) ◽  
pp. 1950219 ◽  
Author(s):  
D. Agrawal ◽  
S. Maheshwari
Keyword(s):  
Transfer Functions ◽  
Current Mode ◽  
Cmos Technology ◽  
Monte Carlo Analysis ◽  
Passive Element ◽  
First Order ◽  
Order Filter ◽  
Sinusoidal Oscillator ◽  
High Output Impedance ◽  
Electronically Tunable

This paper presents an electronically tunable current-mode first-order universal filter. The proposed circuit employs only a single Extra-X Current-Controlled Conveyor (EX-CCCII) and a single grounded capacitor, which is suitable for IC implementation. The circuit can realize three current transfer functions simultaneously, namely low-pass, high-pass and all-pass. The proposed circuit exhibits low-input and high-output impedance, which is suitable for cascading. The pole frequency of the filter can be electronically tuned, by varying the bias current of EX-CCCII. The nonidealities and parasitic effects on the circuit performance are investigated in detail. Also, the Monte Carlo analysis is done to show the effect of active and passive element mismatches on the pole frequency. An eight-phase current-mode sinusoidal oscillator and current-mode second-order filter are further realized using the proposed circuit. The functionality of the proposed circuits is verified through PSPICE simulations, using 0.25-[Formula: see text]m TSMC CMOS technology parameters.

Sign in / Sign up

Export Citation Format

Share Document