scholarly journals TESTING OF NATURAL INSULATION MATERIALS USING A CONICAL CALORIMETER

2020 ◽  
Vol 1 ◽  
pp. 14-20
Author(s):  
Michael Horváthová ◽  
Linda Makovická Osvaldová
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Fire Safety ◽  
Ignition Time ◽  
Point Of View ◽  
Maximum Heat ◽  
Insulating Material ◽  
Insulation Materials ◽  
Wide Range

This paper examines three types of natural insulation materials, such as fiberboard, hemp and straw, from the point of view of fire safety. Cellulose-based materials allow a wide range of applications when used for insulation and weatherproofing of buildings, in particular floors, roofs, ceilings, attics, sound barriers, etc. The use of these materials is increasing in ecological constructions as well as for weatherproofing wood-based structures. In terms of fire safety requirements, the question is: Which insulating material is the safest in terms of fire propagation? The article focuses on natural products used as external insulation systems which are covered by a facade plaster. Each type of insulation is briefly described in terms of its composition, use, and production process. We describe the process of preparation of samples as well as the testing and measurement procedures. Three tests were carried out for each type of material. For a more objective evaluation, results were averaged. The results of the cone calorimeter were used to obtain data for comparison. The aim is to clarify the behavior of the natural insulating material with regard to the heat release rate, ignition time, burning duration, and maximum heat release rate. These are the essential parameters for comparison. The values were compared to determine the safest material from the point of view of fire safety.

Thermal Aging Effects on Fire Performance of the Cross-Linked Polyethylene Insulated Cable

2017 ◽  
Vol 898 ◽  
pp. 2399-2404 ◽  
Author(s):  
Jin Mei Li ◽  
Jia Qing Zhang ◽  
Qiang Li ◽  
Zi Dong Guo
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Thermal Aging ◽  
Ignition Time ◽  
Fire Performance ◽  
Aging Effects ◽  
Insulation Materials ◽  
Insulation Failure ◽  
Failure Temperature

To evaluate the fire performance of the cable in service, the ignition time, heat release rate and insulation failure parameters of the accelerated thermal aging cable on stimulated fire condition were studied. The results show that, the extended ignition time and decreasing peak of heat release rate of the cable in the early stage of aging are the addictive including the lubricant, plasticizer and anti-oxygen. In the aggravating of thermal aging, labile materials with low heating value will be exhausted, while the thermal stability of insulation sheath material decreases, its corresponding ignition time will start to shorten and initial peak of heat release rate will start to rise. The insulation failure temperature of the cable is related with the decomposition temperature of insulation materials of the cable by heating. In each aging stage, the decomposition temperatures of insulation materials by heating are all lower than the insulation failure temperature of the cable for about 10°C. The reason for the insulation failure of the cable is that the ambient heat , gives rise to the decomposition by heating of internal insulation materials of the cable through sheath materials finally under the thermal transmission effect.

scholarly journals Effects of Insulating Material Ageing on Ignition Time and Heat Release Rate of the Flame Retardant Cables

2018 ◽  
Vol 211 ◽  
pp. 972-978 ◽  
Author(s):  
Bo-si Zhang ◽  
Jia-qing Zhang ◽  
Qiang Li ◽  
Liu-fang Wang ◽  
Hui Xie ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Ignition Time ◽  
Insulating Material ◽  
Material Ageing

Retardant Properties of Nanosilica/PTFE Nanoparticals-Reinforced Polypropylene

2014 ◽  
Vol 1004-1005 ◽  
pp. 77-84 ◽  
Author(s):  
Zhen Lu Zhang ◽  
Dong Li Li ◽  
Wen Cai Xu ◽  
Ya Bo Fu ◽  
Rui Juan Liao
Keyword(s):  
Mass Loss ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Loss Rate ◽  
Mass Loss Rate ◽  
Thermoplastic Polymer ◽  
Maximum Heat ◽  
Average Mass ◽  
Melting Characteristics

This work reports the flammability properties of Nanocomposites reinforced with silica and PTFE nanoparticles and toughened with an elastomeric ethylene-vinyl acetate (EVA). Through trial and simulation study of the flame retardant thermoplastic polymer and melting characteristics of PP in the combustion process.The study found that modified PP composites have good flame retardancy compared to PP in case of fire relatively.In the study,the melting characteristics of the thermoplastic polymer affected the mass loss rate in the combustion stage.Nanocomposites experienced low plastic mass loss compared with PP, this has been related to pyrolysis mechanism of polymer.In general,The polymers undergoing depolymerization will lead to a rapid volatilization and therefore experienced much less melting.The results showed that:total heat release of nanocomposites was higher than polypropylene, while the average heat release rate, the maximum heat release rate, the average effective heat of combustion, the average mass loss rate, the average specific extinction area, and other indicators were lower than polypropylene.

The Increase in the Maximum Heat-Release Rate and Apparent Flame Strength of Opposed-Jet Diffusion Flames Under Impressed Electric Fields

1966 ◽  
Vol 88 (2) ◽  
pp. 157-164
Author(s):  
Bernard J. Rezy ◽  
Robert J. Heinsohn
Keyword(s):  
Electric Field ◽  
Heat Release ◽  
Electric Fields ◽  
Heat Release Rate ◽  
Release Rate ◽  
Field Experiments ◽  
Diffusion Flames ◽  
Maximum Heat ◽  
Jet Diffusion Flames ◽  
Opposed Jet

This paper is concerned with a study of the behavior of opposed-jet diffusion flames subjected to electrostatic fields. A theory for an idealized diffusion flame is presented which predicts an increase in the maximum volumetric heat-release rate when a flame is subjected to an electric field. Experiments reveal that the maximum mass flow into the flame increases with the application of an electric field.

scholarly journals Estimation of Magnitude and Heat Release Rate of Fires Occurring in Historic Buildings-Taking Churches as an Example

2021 ◽  
Vol 13 (16) ◽  
pp. 9193
Author(s):  
Wen-Yao Chang ◽  
Chieh-Hsin Tang ◽  
Ching-Yuan Lin
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Water Mist ◽  
Smoke Detector ◽  
Fire Dynamics ◽  
Historical Building ◽  
Maximum Heat ◽  
Improvement Measures ◽  
Maximum Heat Release

Historical buildings often fail to meet today’s building and fire protection regulations due to their structure and space restrictions. For this reason, if such buildings encounter fire, serious damage will be resulted. The fire of the Notre-Dame Cathedral in Paris (Notre-Dame de Paris) in April 2019 highlights the seriousness of this problem. In this study, the historical building of “Tamsui Church” was selected as an example. The Fire Dynamics Simulator (FDS) was adopted to analyze the scale of damage and possible hazards when the wooden seats in the church are on fire, and improvement measures were proposed to ensure that such buildings can be used under safer conditions. It was found that the existing seat arrangement will cause the spreading of fire, and the maximum heat release rate is 2609.88 kW. The wooden roof frame above the fire source will also start to burn at 402.88 s (6.6 min) after the fire, which will lead to a full-scale fire. To maintain the safety of the historical building, it is necessary to add active firefighting equipment (smoke detector and water mist system).

scholarly journals A Numerical Study on the Effect of Volume Change in a Closed Compartment on Maximum Heat Release Rate

2017 ◽  
Vol 31 (5) ◽  
pp. 19-27
Author(s):  
Hong-Seok Yun ◽  
◽  
Dong-Gun Nam ◽  
Cheol-Hong Hwang ◽  
◽  
...  
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Volume Change ◽  
Release Rate ◽  
Numerical Study ◽  
Maximum Heat ◽  
Maximum Heat Release

scholarly journals Differences between Free and Compartment Burning of Furniture Part 2 Maximum Heat Release Rate and Fire Growth Rate

2007 ◽  
Vol 26 (4) ◽  
pp. 523-527
Author(s):  
Akihide Jo ◽  
Takayuki Orito ◽  
Norichika Kakae ◽  
Yoshifumi Ohmiya ◽  
Kaoru Wakatsuki
Keyword(s):  
Growth Rate ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Fire Growth ◽  
Maximum Heat ◽  
Maximum Heat Release

scholarly journals Flammability Characteristics of Green Roofs

Buildings ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 126
Author(s):  
Nataliia Gerzhova ◽  
Pierre Blanchet ◽  
Christian Dagenais ◽  
Sylvain Ménard ◽  
Jean Côté
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Green Roof ◽  
Fire Risk ◽  
Green Roofs ◽  
Fuel Load ◽  
Growing Media ◽  
Maximum Heat ◽  
Flammability Characteristics

Assessing the fire risk of vegetated roofs includes the determination of their possible contribution to fire. Green roof components such as plants and growing media are organic materials and present a fuel that can catch and support the spread of fire. The flammability characteristics of these components were analyzed and compared to a typical roof covering. Growing media with 15% of organic matter were tested using cone calorimeter apparatus. The fuel load and heat release rate of the growing media were measured in both moist (30%) and dry conditions. It was observed that growing media in a moist condition do not present a fire risk, reaching a maximum heat release rate of 33 kW/m2. For dry substrates, a peak heat release rate of 95 kW/m2 was recorded in the first minute, which then rapidly decreased to 29 kW/m2 in the second minute. Compared to a typical bitumen roof membrane, the green roof showed a better fire performance. The literature data report more severe results for plant behavior, reaching peak heat release rates (HRRs) of 397 kW/m2 for dried and 176 kW/m2 for a green material. However, a rapid decrease in HRR to much lower values occurs in less than 2 min. The results also show that extensive and intensive types of green roofs present 22% and 95% of the additional fire load density when installed on a modified bitumen membrane, 19.7 and 85.8 MJ/m2, respectively.

Sign in / Sign up

Export Citation Format

Share Document