scholarly journals A Significant Enhance of Impact Strength with Thermal Annealing in High Density Polyethylene

2001 ◽  
Vol 33 (3) ◽  
pp. 270-276 ◽  
Author(s):  
María L Cerrada ◽  
Rosario Benavente ◽  
Carmen A Sierra
Keyword(s):  
Impact Strength ◽  
Thermal Annealing ◽  
High Density Polyethylene ◽  
High Density

Evaluation of the Aging Behavior of High Density Polyethylene in Thermal Oxidative Environment by Principal Component Analysis

2017 ◽  
Vol 727 ◽  
pp. 447-449 ◽  
Author(s):  
Jun Dai ◽  
Hua Yan ◽  
Jian Jian Yang ◽  
Jun Jun Guo
Keyword(s):  
Principal Component Analysis ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Tensile Modulus ◽  
Principal Component ◽  
Component Analysis ◽  
High Density ◽  
Aging Behavior ◽  
Data Set ◽  
The Impact

To evaluate the aging behavior of high density polyethylene (HDPE) under an artificial accelerated environment, principal component analysis (PCA) was used to establish a non-dimensional expression Z from a data set of multiple degradation parameters of HDPE. In this study, HDPE samples were exposed to the accelerated thermal oxidative environment for different time intervals up to 64 days. The results showed that the combined evaluating parameter Z was characterized by three-stage changes. The combined evaluating parameter Z increased quickly in the first 16 days of exposure and then leveled off. After 40 days, it began to increase again. Among the 10 degradation parameters, branching degree, carbonyl index and hydroxyl index are strongly associated. The tensile modulus is highly correlated with the impact strength. The tensile strength, tensile modulus and impact strength are negatively correlated with the crystallinity.

scholarly journals Structures and impact strength variation of chemically crosslinked high-density polyethylene: effect of crosslinking density

RSC Advances ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 6791-6797
Author(s):  
Yueqing Ren ◽  
Xiaojie Sun ◽  
Lanlan Chen ◽  
Yafei Li ◽  
Miaomiao Sun ◽  
...  
Keyword(s):  
Low Temperature ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
Crosslinking Density ◽  
High Density ◽  
Strength Variation

Crosslinking significantly improves the toughness and impact strength of HDPE and extends its application, especially at low temperature.

Effect of particulate fillers on natural rubber/high-density polyethylene blends for roofing application

2020 ◽  
pp. 096739112093461
Author(s):  
WVWH Wickramaarachchi ◽  
S Walpalage ◽  
SM Egodage
Keyword(s):  
Impact Strength ◽  
Natural Rubber ◽  
High Density Polyethylene ◽  
Thermoplastic Elastomer ◽  
Cost Effective ◽  
Barium Sulphate ◽  
Filler Loading ◽  
High Density ◽  
Melt Mixing ◽  
Excellent Property

Blending of two or more polymers generates a new material, which is more cost-effective than a newly synthesised material. Blending-type thermoplastic elastomer (TPE) is produced by melt-mixing of a thermoplastic with a rubber. These blends have high demands associated with excellent property combinations of the parent materials. Particulate fillers are used in the rubber and plastic industry for property modification and cost reduction. In this work, six particulate fillers, namely, calcium carbonate, barium sulphate (BaSO4), kaolin, talc, Snobrite clay and dolomite were used to develop natural rubber (NR)/high-density polyethylene (HDPE) TPE blends, and the most suitable filler for roofing application was identified. A series of NR/HDPE 20/80 blends were prepared by varying filler loading from 10 phr to 30 phr at 10 phr intervals using a Plasticorder. Mechanical properties, such as tensile strength, hardness, impact strength and tear strength, and gel content of the blends were investigated. The addition of talc, dolomite and kaolin to NR/HDPE blend showed reduced impact strength, which is the most important property for a roofing application. The other three fillers showed improved impact strength at specific loadings. The blend with 30 phr of BaSO4 was identified as the best blend, as per the overall performance.

scholarly journals Reinforcing high-density polyethylene by phenolic spheres

2018 ◽  
Vol 238 ◽  
pp. 05003
Author(s):  
Lien Zhu ◽  
Di Wu ◽  
Baolong Wang ◽  
Jing Zhao ◽  
Meihua Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Materials ◽  
Impact Strength ◽  
Rheological Properties ◽  
High Density Polyethylene ◽  
High Density

Phenolic spheres are synthesized through resorcinol and formaldehyde. The phenolic spheres were blended with HDPE to prepare binary composites. The rheological properties and mechanical properties of the composites were studied. The composite materials have higher tensile strength and impact strength than pure HDPE, which extends the application of the material.

scholarly journals Effects of gamma radiation on the impact strength of polypropylene (PP)/high density polyethylene (HDPE) blends

2019 ◽  
Vol 12 ◽  
pp. 2169-2174 ◽  
Author(s):  
Wenzhao Wang ◽  
Xiaochao Zhang ◽  
Zongyuan Mao ◽  
Weiquan Zhao
Keyword(s):  
Impact Strength ◽  
Gamma Radiation ◽  
High Density Polyethylene ◽  
High Density ◽  
The Impact

Impact strength of high-density polyethylene with various molecular weight distributions

1975 ◽  
Vol 9 (5) ◽  
pp. 807-809
Author(s):  
A. N. Karasev ◽  
I. N. Andreeva ◽  
M. G. Karaseva ◽  
N. M. Domareva
Keyword(s):  
Molecular Weight ◽  
Impact Strength ◽  
High Density Polyethylene ◽  
High Density ◽  
Molecular Weight Distributions ◽  
Weight Distributions
Sign in / Sign up

Export Citation Format

Share Document