scholarly journals Studies on Relationships between Material Properties and Dynamic Viscoelastic Properties of Rubber Vulcanizates. III. Changes in Material Properties and Dynamic Properties of Anti-Vibration Rubber for Railway Vehicles.

1992 ◽  
Vol 49 (3) ◽  
pp. 169-173
Author(s):  
Naoto MIFUNE ◽  
Yasutaka NAGAI ◽  
Kiichi TAKEMOTO
Keyword(s):  
Material Properties ◽  
Viscoelastic Properties ◽  
Dynamic Properties ◽  
Railway Vehicles

scholarly journals 3D Plotting of Silica/Collagen Xerogel Granules in an Alginate Matrix for Tissue-Engineered Bone Implants

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 830
Author(s):  
Sina Rößler ◽  
Andreas Brückner ◽  
Iris Kruppke ◽  
Hans-Peter Wiesmann ◽  
Thomas Hanke ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Bone Regeneration ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Viscoelastic Behavior ◽  
Matrix Phase ◽  
Patient Specific ◽  
Active Player ◽  
Alginate Concentration ◽  
Alginate Matrix

Today, materials designed for bone regeneration are requested to be degradable and resorbable, bioactive, porous, and osteoconductive, as well as to be an active player in the bone-remodeling process. Multiphasic silica/collagen Xerogels were shown, earlier, to meet these requirements. The aim of the present study was to use these excellent material properties of silica/collagen Xerogels and to process them by additive manufacturing, in this case 3D plotting, to generate implants matching patient specific shapes of fractures or lesions. The concept is to have Xerogel granules as active major components embedded, to a large proportion, in a matrix that binds the granules in the scaffold. By using viscoelastic alginate as matrix, pastes of Xerogel granules were processed via 3D plotting. Moreover, alginate concentration was shown to be the key to a high content of irregularly shaped Xerogel granules embedded in a minimum of matrix phase. Both the alginate matrix and Xerogel granules were also shown to influence viscoelastic behavior of the paste, as well as the dimensionally stability of the scaffolds. In conclusion, 3D plotting of Xerogel granules was successfully established by using viscoelastic properties of alginate as matrix phase.

On the Measurement of Dynamic Properties of Lubricants under E. H. L. Conditions Using a Disc Machine

1974 ◽  
Vol 16 (5) ◽  
pp. 331-338 ◽  
Author(s):  
J. M. Davies ◽  
K. Walters
Keyword(s):  
Viscoelastic Properties ◽  
Dynamic Properties ◽  
Elastohydrodynamic Lubrication ◽  
Deborah Number ◽  
Theoretical Treatment

Johnson and Roberts (1)‡ have recently shown how a simple adaptation of the conventional disc machine can be used to measure the viscoelastic properties of lubricants under conditions of elastohydrodynamic lubrication. The present paper contains a theoretical treatment of the problem and derives operating formulae pertinent to conditions of low, finite and high Deborah number.

Properties of Mouse Cutaneous Rapidly Adapting Afferents: Relationship to Skin Viscoelasticity

2004 ◽  
Vol 92 (2) ◽  
pp. 1236-1240 ◽  
Author(s):  
P. Grigg ◽  
D. R. Robichaud ◽  
Z. Del Prete
Keyword(s):  
Viscoelastic Material ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Mechanical Response ◽  
Loss Modulus ◽  
Multiple Logistic Regression Analysis ◽  
Rate Of Change ◽  
Volterra Model ◽  
Lower Sensitivity ◽  
Dynamic Stimuli

When skin is stretched, stimuli experienced by a cutaneous mechanoreceptor neuron are transmitted to the nerve ending through the skin. In these experiments, we tested the hypothesis that the viscoelastic response of the skin influences the dynamic response of cutaneous rapidly adapting (RA) neurons. Cutaneous RA afferent neurons were recorded in 3 species of mice (Tsk, Pallid, and C57BL6) whose skin has different viscoelastic properties. Isolated samples of skin and nerve were stimulated mechanically with a dynamic stretch stimulus, which followed a pseudo Gaussian waveform with a bandwidth of 0–60 Hz. The mechanical response of the skin was measured as were responses of single RA cutaneous mechanoreceptor neurons. For each neuron, the strength of association between spike responses and the dynamic and static components of stimuli were determined with multiple logistic regression analysis. The viscoelastic material properties of each skin sample were determined indirectly, by creating a nonlinear (Wiener–Volterra) model of the stress–strain relationship, and using the model to predict the complex compliance (i.e., the viscoelastic material properties). The dynamic sensitivity of RA mechanoreceptor neurons in mouse hairy skin was weakly related to the viscoelastic properties of the skin. Loss modulus and phase angle were lower (indicating a decreased viscous component of response) in Tsk and Pallid than in C57BL6 mice. However, RA mechanoreceptor neurons in Tsk and Pallid skin did not differ from those in C57 skin with regard to their sensitivity to the rate of change of stress or to the rate of change of incremental strain energy. They did have a decreased sensitivity to the rate of change of tensile strain. Thus the skin samples with lower dynamic mechanical response contained neurons with a somewhat lower sensitivity to dynamic stimuli.

Modeling and Experimental Characterization of Viscoelastic 3D Printed Spring/Damper Systems

2017 ◽  
Author(s):  
Heather L. Lai ◽  
Cuiyu Kuang ◽  
Jared Nelson
Keyword(s):  
Dynamic Behavior ◽  
Material Properties ◽  
Dynamic Properties ◽  
Viscoelastic Materials ◽  
Vibration Isolators ◽  
Damping Behavior ◽  
Wide Range ◽  
3D Printed ◽  
Printed Materials

The development of flexible, viscoelastic materials for consumer 3D printers has provided the opportunity for a wide range of devices with damping behavior such as tuned vibration isolators to be innovatively developed and inexpensively manufactured. However, there is currently little information available about the dynamic behavior of these 3D printed materials necessary for modeling of dynamic behavior prior to print. In order to fully utilize these promising materials, a deeper understanding of the material properties, and the subsequent dynamic behavior is critical. This study evaluates the use of three different types of models: transient response, frequency response and hysteretic response to predict the dynamic behavior of viscoelastic 3D printed materials based on static and dynamic material properties. Models of viscoelastic materials are presented and verified experimentally using two 3D printable materials and two traditional viscoelastic materials. The experimental response of each of the materials shows agreement with the modeled behavior, and underscores the need for improved characterization of the dynamic properties of viscoelastic 3D printable materials.

Impact of material concentration and distribution on composite parts manufactured via multi-material jetting

2018 ◽  
Vol 24 (5) ◽  
pp. 872-879 ◽  
Author(s):  
Nicholas Alexander Meisel ◽  
David A. Dillard ◽  
Christopher B. Williams
Keyword(s):  
Material Properties ◽  
Viscoelastic Properties ◽  
Design Space ◽  
Base Material ◽  
Material Design ◽  
Mechanical Analysis ◽  
Material Composition ◽  
Significant Shift ◽  
Content Type ◽  
Property Changes

Purpose Material jetting approximates composite material properties through deposition of base materials in a dithered pattern. This microscale, voxel-based patterning leads to macroscale property changes, which must be understood to appropriately design for this additive manufacturing (AM) process. This paper aims to identify impacts on these composites’ viscoelastic properties due to changes in base material composition and distribution caused by incomplete dithering in small features. Design/methodology/approach Dynamic mechanical analysis (DMA) is used to measure viscoelastic properties of two base PolyJet materials and seven “digital materials”. This establishes the material design space enabled by voxel-by-voxel control. Specimens of decreasing width are tested to explore effects of feature width on dithering’s ability to approximate macroscale material properties; observed changes are correlated to multi-material distribution via an analysis of ingoing layers. Findings DMA shows storage and loss moduli of preset composites trending toward the iso-strain boundary as composition changes. An added iso-stress boundary defines the property space achievable with voxel-by-voxel control. Digital materials exhibit statistically significant changes in material properties when specimen width is under 2 mm. A quantified change in same-material droplet groupings in each composite’s voxel pattern shows that dithering requires a certain geometric size to accurately approximate macroscale properties. Originality/value This paper offers the first quantification of viscoelastic properties for digital materials with respect to material composition and identification of the composite design space enabled through voxel-by-voxel control. Additionally, it identifies a significant shift in material properties with respect to feature width due to dithering pattern changes. This establishes critical design for AM guidelines for engineers designing with digital materials.

Strengthening and Retrofitting of Motín de Oro II Bridge in Mexico

2020 ◽  
pp. 193-209
Author(s):  
Jose M. Jara ◽  
Bertha A. Olmos ◽  
Guillermo Martínez
Keyword(s):  
Material Properties ◽  
River Flow ◽  
Dynamic Properties ◽  
Flow Characteristics ◽  
Ambient Vibration ◽  
Structural Elements ◽  
Box Girder ◽  
Prone Area ◽  
Scour Protection ◽  
Ambient Vibration Measurements

This chapter presents the studies conducted to retrofit an existing bridge in a seismic prone area of Mexico. The Motín de Oro II Bridge was built in the 1970s with a continuous box girder superstructure and wall-type substructure. From the 1970s to nowadays, the design truck loads in Mexico have been substantially incremented and many bridges built in that period have required to be evaluated and, in some cases, rehabilitated and retrofitted. Firstly, the study presents the results of visual inspections of all parts of the bridge and a description of the preliminary studies conducted to determine the material properties, to evaluate the river flow characteristics and to calculate the scour depth. Secondly, the chapter discusses the initial structural analyses of the bridge subjected to the original gravitational and seismic loads and to the current loads before the intervention. These analyses allow to select the structural elements that require to be retrofitted and the best strategy to follow. Finally, the study presents results of the numerical retrofitted model and the experimental assessment of the dynamic properties based on ambient vibration measurements. Additionally, the scour protection and the general construction procedure are also described.

scholarly journals Controlling the material properties and rRNA processing function of the nucleolus using light

2019 ◽  
Vol 116 (35) ◽  
pp. 17330-17335 ◽  
Author(s):  
Lian Zhu ◽  
Tiffany M. Richardson ◽  
Ludivine Wacheul ◽  
Ming-Tzo Wei ◽  
Marina Feric ◽  
...  
Keyword(s):  
Phase Behavior ◽  
Ribosomal Rna ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Ribosome Biogenesis ◽  
Threshold Concentration ◽  
Rrna Processing ◽  
Small Proteins ◽  
Nucleolar Material ◽  
Processing Steps

The nucleolus is a prominent nuclear condensate that plays a central role in ribosome biogenesis by facilitating the transcription and processing of nascent ribosomal RNA (rRNA). A number of studies have highlighted the active viscoelastic nature of the nucleolus, whose material properties and phase behavior are a consequence of underlying molecular interactions. However, the ways in which the material properties of the nucleolus impact its function in rRNA biogenesis are not understood. Here we utilize the Cry2olig optogenetic system to modulate the viscoelastic properties of the nucleolus. We show that above a threshold concentration of Cry2olig protein, the nucleolus can be gelled into a tightly linked, low mobility meshwork. Gelled nucleoli no longer coalesce and relax into spheres but nonetheless permit continued internal molecular mobility of small proteins. These changes in nucleolar material properties manifest in specific alterations in rRNA processing steps, including a buildup of larger rRNA precursors and a depletion of smaller rRNA precursors. We propose that the flux of processed rRNA may be actively tuned by the cell through modulating nucleolar material properties, which suggests the potential of materials-based approaches for therapeutic intervention in ribosomopathies.

scholarly journals Study on Cbanges in Material Properties of Air Spring Rubber Bellows for Railway Vehicles.

2001 ◽  
Vol 58 (2) ◽  
pp. 92-98 ◽  
Author(s):  
Toshio AZECHI ◽  
Masanori HANSAKA ◽  
Naoto MIFUNE ◽  
Riichiro OHARA
Keyword(s):  
Material Properties ◽  
Air Spring ◽  
Railway Vehicles
Sign in / Sign up

Export Citation Format

Share Document