scholarly journals Air Traffic Control Capacity Planning Under Demand and Capacity Provision Uncertainty

2020 ◽  
Vol 54 (4) ◽  
pp. 882-896 ◽  
Author(s):  
Stefano Starita ◽  
Arne K. Strauss ◽  
Xin Fei ◽  
Radosav Jovanović ◽  
Nikola Ivanov ◽  
...  

In air traffic management, a fundamental decision with large cost implications is the planning of future capacity provision. Here, capacity refers to the available man-hours of air traffic controllers to monitor traffic. Airspace can be partitioned in various ways into a collection of sectors, and each sector has a fixed maximum number of flights that may enter within a given time period. Each sector also requires a fixed number of man-hours to be operated; we refer to them as sector-hours. Capacity planning usually takes place a long time ahead of the day of operation to ensure that sufficiently many air traffic controllers are available to manage the flow of aircrafts. However, at the time of planning, there is considerable uncertainty regarding the number and spatiotemporal distribution of nonscheduled flights and capacity provision, the former mainly due to business aviation, and the latter usually stemming from the impact of weather, military use of airspaces, etc. Once the capacity decision has been made (in terms of committing to a budget of sector-hours per airspace to represent long-term staff scheduling), on the day of operation, we can influence traffic by enforcing rerouting and tactical delays. Furthermore, we can modify which sectors to open at a given time (the so-called sector-opening scheme) subject to the fixed capacity budgets in each airspace. The fundamental trade-off is between reducing the capacity provision cost at the expense of potentially increasing displacement cost arising from rerouting or delays. To tackle this, we propose a scalable decomposition approach that exploits the structure of the problem and can take traffic and capacity provision uncertainty into account by working with a large number of traffic scenarios. We propose several decision policies based on the resulting pool of solutions and test them numerically using real-world data.

2009 ◽  
Vol 62 (4) ◽  
pp. 555-570 ◽  
Author(s):  
Peter Brooker

It is now widely recognised that a paradigm shift in air traffic control concepts is needed. This requires state-of-the-art innovative technologies, making much better use of the information in the air traffic management (ATM) system. These paradigm shifts go under the names of NextGen in the USA and SESAR in Europe, which inter alia will make dramatic changes to the nature of airport operations. A vital part of moving from an existing system to a new paradigm is the operational implications of the transition process. There would be business incentives for early aircraft fitment, it is generally safer to introduce new technologies gradually, and researchers are already proposing potential transition steps to the new system. Simple queuing theory models are used to establish rough quantitative estimates of the impact of the transition to a more efficient time-based – four-dimensional (4D) – navigational and ATM system. Such models are approximate, but they do offer insight into the broad implications of system change and its significant features. 4D-equipped aircraft in essence have a contract with the airport runway – they would be required to turn up at a very precise time – and, in return, they would get priority over any other aircraft waiting for use of the runway. The main operational feature examined here is the queuing delays affecting non-4D-equipped arrivals. These get a reasonable service if the proportion of 4D-equipped aircraft is low, but this can deteriorate markedly for high proportions, and be economically unviable. Preventative measures would be to limit the additional growth of 4D-equipped flights and/or to modify their contracts to provide sufficient space for the non-4D-equipped flights to operate without excessive delays. There is a potential for non-Poisson models, for which there is little in the literature, and for more complex models, e.g. grouping a succession of 4D-equipped aircraft as a batch.


Author(s):  
Tsubasa Takagi ◽  
Miwa Nakanishi

Air traffic demand has been growing for years and many countries are trying to solve this situation by modernizing their national airspace through advanced automation. Those projects aim to provide a greater level of efficiency while ensuring a safe flow of air traffic. However, human air traffic controllers have been coping with difficult situations and unexpected events by flexibly balancing efficiency and thoroughness throughout their operations. In this study, we conducted an experiment using a simulator depicting air traffic control tower operations and analyzed the trade-off decisions made by humans under varying situations. By doing so, we proposed a model with the aim of applying the results to future air traffic management systems. This could allow those autonomous systems to make decisions that are similar to those of human preferences, which could lead to a proactive management of safety and a higher level of automation acceptance.


2020 ◽  
Vol 6 (1) ◽  
pp. 77-88
Author(s):  
Rafał Zajkowski

This article analyzes the principles and organization of the operation of the military runways used by Polish and Allied aircrafts during missions in Iraq. The main goal of the article is to describe the organization and method of air traffic management by the Polish air traffic controllers (ATC). It depicts the method of planning and preparing aviation operations, the principles of air traffic organization, which were the responsibility of the Polish controllers, and the rules for the traffic above the airstrip. Among the particular problems that are discussed, there are the rules of airspace segmentation, the introduced solutions for air traffic control, and the use of airport infrastructure. The experiences discussed include valuable information regarding the process of securing air traffic that can be helpful in the organization of landing pads and in preparation of both Polish and allied military contingent aviation personnel for future aboard operations. This paper presents the results of the research carried out with the ATC personnel performing tasks in Iraq.


Safety ◽  
2019 ◽  
Vol 5 (3) ◽  
pp. 41 ◽  
Author(s):  
Pérez-Castán ◽  
Rodríguez-Sanz ◽  
Gómez Comendador ◽  
Arnaldo Valdés

Remotely-piloted aircraft systems (RPASs) present interesting and complex challenges for air traffic management. One of the most critical aspects of the integration of RPASs in non-segregated airspace is safety assessments. This paper lays out a methodology for estimating the minimum protection distance (MPD) that is required to avoid potential conflicts between RPASs and conventional aircraft. The MPD determines the final moment that air traffic control may instruct a RPAS to start climbing with a fixed rate of climb (ROC) to avoid separation minima infringement. The methodology sets out a conflict-resolution algorithm to estimate the MPD. It also models the impact of communication, navigation, and surveillance requirements on the MPD. The main difference between RPASs and conventional aircraft is that the former needs additional communication between the RPAS and pilot in the form of a required Comand and Control link performance (RLP). Finally, the authors carried out Monte Carlo simulations to estimate the value of the MPD only for the head-on encounter, which is the worst scenario. The results showed that the main factors affecting the MPD were RLP and ROC. By increasing RLP and decreasing ROC it was possible to reduce the MPD from 28 to 17 nautical miles; however, the variation in the MPD was not linear.


Author(s):  
Lynne Martin ◽  
Savita Verma ◽  
Deborah Ballinger ◽  
Victor Cheng

The effects of advanced automation tools on the air traffic control tower environment were assessed through a real-time simulation study. One focus of the study was the impact that advanced tools would have on controllers' roles and work patterns. Participants controlled simulated traffic during 45-minute scenarios, and reported their perceived workload and experience of using a prototype automation tool. Perceived workload was significantly reduced in the advanced automation conditions, more so as the automation assumed more functions. Participants interacted a great deal with the automation in these conditions, a notable proportion of which was interface management. Despite generally liking the tool, controllers reported the automation had assumed all of their role's decision-making responsibilities and left them with mechanical tasks. It is concluded that a more artful allocation of functions is required if controllers are to be engaged in their task when using advanced automation tools.


Aerospace ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 260
Author(s):  
Yanjun Wang ◽  
Rongjin Hu ◽  
Siyuan Lin ◽  
Michael Schultz ◽  
Daniel Delahaye

Air traffic controllers have to make quick decisions to keep air traffic safe. Their behaviors have a significant impact on the operation of the air traffic management (ATM) system. Automation tools have enhanced the ATM system’s capability by reducing the controller’s task-load. Much attention has been devoted to developing advanced automation in the last decade. However, less is known about the impact of automation on the behaviors of air traffic controllers. Here, we empirically tested the effects of three levels of automation—including manual, attention-guided, and automated—as well as varying traffic levels on eye movements, situation awareness and mental workload. The results showed that there are significant differences in the gaze and saccade behaviors between the attention-guided group and automated group. Traffic affected eye movements under the manual mode or under the attention-guided mode, but had no effect on eye movements under the automated mode. The results also supported the use of automation for enhancing situation awareness while reducing mental workload. Our work has potential implications for the design of automation and operation procedures.


2013 ◽  
Author(s):  
Angela Schmitt ◽  
Ruzica Vujasinovic ◽  
Christiane Edinger ◽  
Julia Zillies ◽  
Vilmar Mollwitz

Author(s):  
A. V. Strukova

The article considers the new automated air traffic management system «Synthesis AR4», as well as a system description for ensuring the implementation of a modernized airspace structure, navigation and surveillance that provides technical capabilities. A number of functional capabilities and advantages of the airspace security system are presented.


Aerospace ◽  
2021 ◽  
Vol 8 (7) ◽  
pp. 170
Author(s):  
Ricardo Palma Fraga ◽  
Ziho Kang ◽  
Jerry M. Crutchfield ◽  
Saptarshi Mandal

The role of the en route air traffic control specialist (ATCS) is vital to maintaining safety and efficiency within the National Airspace System (NAS). ATCSs must vigilantly scan the airspace under their control and adjacent airspaces using an En Route Automation Modernization (ERAM) radar display. The intent of this research is to provide an understanding of the expert controller visual search and aircraft conflict mitigation strategies that could be used as scaffolding methods during ATCS training. Interviews and experiments were conducted to elicit visual scanning and conflict mitigation strategies from the retired controllers who were employed as air traffic control instructors. The interview results were characterized and classified using various heuristics. In particular, representative visual scanpaths were identified, which accord with the interview results of the visual search strategies. The highlights of our findings include: (1) participants used systematic search patterns, such as circular, spiral, linear or quadrant-based, to extract operation-relevant information; (2) participants applied an information hierarchy when aircraft information was cognitively processed (altitude -> direction -> speed); (3) altitude or direction changes were generally preferred over speed changes when imminent potential conflicts were mitigated. Potential applications exist in the implementation of the findings into the training curriculum of candidates.


Author(s):  
Jamie D. Barrett ◽  
Brett Torrence ◽  
Michelle Bryant ◽  
Linda Pierce ◽  
Julia Buck

The primary mission of the Federal Aviation Administration (FAA) is to maintain the safety of the National Airspace System (NAS). As part of this mission, the FAA is tasked with ensuring that future air traffic controllers are adequately trained to perform the high-risk job of directing air traffic. The FAA Academy curriculum for newly hired controllers involves 3-4 months of intensive lessons and performance assessments. It has been suggested that this training program is quite stressful, and successful trainees tend to be those who can better manage stress. To support ATC trainees, researchers at the Civil Aerospace Medical Institute (CAMI) have conducted operational research to develop and evaluate a stress management training to help trainees manage their stress during training at the FAA Academy.


Sign in / Sign up

Export Citation Format

Share Document