scholarly journals ANTIGLIDE PLATING IN D ISTAL FIBU LAR FRACTURE FIXATION IN OSTEOPOROTIC PATIENT

2018 ◽  
Vol 47 (2) ◽  
pp. 195-204
Author(s):  
HUSSEIN ABD- ALZAHER ABUELGHATT ◽  
HESHAM MOHMED SAFWAT ◽  
Khaled Abd-Elwahab Marzouki Ebeid
Keyword(s):  
Fracture Fixation ◽  
Osteoporotic Patient

Biomechanical characteristics of allogeneic cortical bone pins designed for fracture fixation

2008 ◽  
Vol 21 (02) ◽  
pp. 140-146
Author(s):  
M. R. Edwards ◽  
S. P. James ◽  
W. S. Dernell ◽  
R. J. Scott ◽  
A. M. Bachand ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Cortical Bone ◽  
Fracture Fixation ◽  
Impact Testing ◽  
Left Tibia ◽  
Four Point Bending ◽  
And Gender ◽  
The Right ◽  
Biomechanical Comparison ◽  
Better Than

SummaryThe biomechanical characteristics of 1.2 mm diameter allogeneic cortical bone pins harvested from the canine tibia were evaluated and compared to 1.1 mm diameter stainless steel pins and 1.3 mm diameter polydioxanone (PDS) pins using impact testing and four-point bending. The biomechanical performance of allogeneic cortical bone pins using impact testing was uniform with no significant differences between sites, side, and gender. In four-point bending, cortical bone pins harvested from the left tibia (204.8 ± 77.4 N/mm) were significantly stiffer than the right tibia (123.7 ± 54.4 N/mm, P=0.0001). The site of bone pin harvest also had a significant effect on stiffness, but this was dependent on interactions with gender and side. Site C in male dogs had the highest mean stiffness in the left tibia (224.4 ± 40.4 N/mm), but lowest stiffness in the right tibia (84.9 ± 24.2 N/mm). Site A in female dogs had the highest mean stiffness in the left tibia (344.9 ± 117.4 N/mm), but lowest stiffness in the right tibia (60.8 ± 3.7 N/mm). The raw and adjusted bending properties of 1.2 mm cortical bone pins were significantly better than 1.3 mm PDS pins, but significantly worse than 1.1 mm stainless steel pins (P<0.0001). In conclusion, cortical bone pins may be suitable as an implant for fracture fixation based on initial biomechanical comparison to stainless steel and PDS pins used in clinical practice.

scholarly journals Patient Positioning for Proximal Femur Fracture Fixation: a Review of Best Practices

2021 ◽  
Author(s):  
Khushdeep S. Vig ◽  
Curtis Adams ◽  
Joseph R. Young ◽  
Eric Perloff ◽  
Casey M. O’Connor ◽  
...  
Keyword(s):  
Best Practices ◽  
Proximal Femur ◽  
Fracture Fixation ◽  
Femur Fracture ◽  
Patient Positioning ◽  
Proximal Femur Fracture

scholarly journals Metacarpal Bony Dimensions Related to Headless Compression Screw Sizes

2019 ◽  
Vol 12 (S 01) ◽  
pp. S39-S44
Author(s):  
Michael Okoli ◽  
Kevin Lutsky ◽  
Michael Rivlin ◽  
Brian Katt ◽  
Pedro Beredjiklian
Keyword(s):  
Computed Tomography ◽  
Fracture Fixation ◽  
Ct Scans ◽  
Compression Screw ◽  
Metacarpal Head ◽  
Headless Compression Screw ◽  
Metacarpal Bones ◽  
Headless Compression Screws ◽  
The Mean ◽  
Distal Aspect

Abstract Introduction The purpose of this study is to determine the radiographic dimensions of the finger metacarpals and to compare these measurements with headless compression screws commonly used for fracture fixation. Materials and Methods We analyzed computed tomography (CT) scans of the index, long, ring, and small metacarpal bones and measured the metacarpal length, distance from the isthmus to the metacarpal head, and intramedullary diameter of the isthmus. Metacarpals with previous fractures or hardware were excluded. We compared these dimensions with the size of several commercially available headless screws used for intramedullary fixation. Results A total of 223 metacarpals from 57 patients were analyzed. The index metacarpal was the longest, averaging 67.6 mm in length. The mean distance from the most distal aspect of the metacarpal head to the isthmus was 40.3, 39.5, 34.4, and 31 mm for the index, long, ring, and small metacarpals, respectively. The narrowest diameter of the isthmus was a mean of 2.6, 2.7, 2.3, and 3 mm for the index, long, ring, and small metacarpals, respectively. Of 33 commercially available screws, only 27% percent reached the isthmus of the index metacarpal followed by 42, 48, and 58% in the long, ring, and small metacarpals, respectively. Conclusion The index and long metacarpals are at a particular risk of screw mismatch given their relatively long lengths and narrow isthmus diameters.

Sign in / Sign up

Export Citation Format

Share Document