Model-assisted Assessment of Damage Detection and Localization using Guided Wave-based Imaging Techniques

2017 ◽  
Author(s):  
JÉRÉMY MORIOT ◽  
NICOLAS QUAEGEBEUR ◽  
ALAIN LE DUFF ◽  
PATRICE MASSON
Keyword(s):  
Damage Detection ◽  
Imaging Techniques ◽  
Guided Wave ◽  
Detection And Localization

Experimental Research on Damages Detection of Pipeline Structure by Using PZT-Based Waves

2011 ◽  
Author(s):  
Shi Yan ◽  
Binbin He ◽  
Naizhi Zhao
Keyword(s):  
Damage Detection ◽  
Lead Zirconate Titanate ◽  
Smart Materials ◽  
Arrival Time ◽  
Mode Conversion ◽  
Guided Wave ◽  
The Other ◽  
Damage Location ◽  
The Waves ◽  
Peak Value

Pipeline structure may generate damages during its service life due to the influence of environment or accidental loading. The damages need to be detected and repaired if they are severe enough to influence the transportation work. Non-destructive detection using smart materials combined with suitable diagonal algorithms are widely used in the field of structural health monitoring (SHM). Piezoelectric ceramics (such as Lead Zirconate Titanate, PZT) is one of the smart materials to be applied in the SHM due to the piezoelectric effect. So far, the PZT-based wave method is widely used for damage detection of structures, in particular, pipeline structures. A series of piezoelectric patches are bonded on the surface of the pipeline structure to monitor the damages such as local crack or effective area reduction due to corrosion by using diagonal waves. The damage of the pipeline structure can be detected by analysis of the received diagonal waves which peak value, phase, and arriving time can be deferent from the health ones. The response of the diagonal wave is not only correlated to the damage location through estimation of the arrival time of the wave peak, but also associated with the peak value of the wave for the reduction of wave energy as the guided wave passing through the damages. Therefore, the presence of damages in the pipeline structure can be detected by investigating the parameter change of the guided waves. The change of the wave parameters represents the attenuation, deflection and mode conversion of the waves due to the damages. In addition, the guided wave has the ability of quick detecting the damage of the pipeline structure and the simplicity of generating and receiving detection waves by using PZT patches. To verify the proposed method, an experiment is designed and tested by using a steel pipe bonded the PZT patches on the surface of it. The PZT patches consist of an array to estimate the location and level of the damage which is simulated by an artificial notch on the surface of the structure. The several locations and deep heights of the notches are considered during the test. A pair of the PZT patches are used at the same time as one is used as an actuator and the other as a sensor, respectively. A tone burst of 5 cycles of wave shape is used during the experiment. A wave generator is applied to create the proposed waves, and the waves are amplified by an amplifier to actuate the PZT patch to emit the diagonal waves with appropriately enough energy. Meanwhile, the other PZT patch is used as a sensor to receive the diagonal signals which contain the information of the damages for processing. For data processing, an index of root mean square deviation (RMSD) of the received data is used to estimate the damage level by compare of the data between the damaged and the health peak valves of the received signals. The time reversal method which aimed at increasing the efficiency of the detection is also used to detect the damage location by estimating the arrival time of the reflected wave passing with a certain velocity. The proposed method experimentally validates that it is effective for application in damage detection of pipeline structure.

Guided wave‐based cable damage detection using wave energy transmission and reflection

2021 ◽  
Author(s):  
Zhi‐Feng Tang ◽  
Xiao‐Dong Sui ◽  
Yuan‐Feng Duan ◽  
Peng‐fei Zhang ◽  
Chung Bang Yun
Keyword(s):  
Damage Detection ◽  
Wave Energy ◽  
Guided Wave ◽  
Energy Transmission ◽  
Cable Damage ◽  
Transmission And Reflection

scholarly journals Lamb Wave Scattering Analysis for Interface Damage Detection between a Surface-Mounted Block and Elastic Plate

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 860
Author(s):  
Mikhail V. Golub ◽  
Alisa N. Shpak ◽  
Inka Mueller ◽  
Sergey I. Fomenko ◽  
Claus-Peter Fritzen
Keyword(s):  
Damage Detection ◽  
Elastic Plate ◽  
Lamb Wave ◽  
Wave Scattering ◽  
Hybrid Approach ◽  
Guided Wave ◽  
Open Crack ◽  
Damage Indices ◽  
Impulse Function ◽  
Thin Walled

Since stringers are often applied in engineering constructions to improve thin-walled structures’ strength, methods for damage detection at the joints between the stringer and the thin-walled structure are necessary. A 2D mathematical model was employed to simulate Lamb wave excitation and sensing via rectangular piezoelectric-wafer active transducers mounted on the surface of an elastic plate with rectangular surface-bonded obstacles (stiffeners) with interface defects. The results of a 2D simulation using the finite element method and the semi-analytical hybrid approach were validated experimentally using laser Doppler vibrometry for fully bonded and semi-debonded rectangular obstacles. A numerical analysis of fundamental Lamb wave scattering via rectangular stiffeners in different bonding states is presented. Two kinds of interfacial defects between the stiffener and the plate are considered: the partial degradation of the adhesive at the interface and an open crack. Damage indices calculated using the data obtained from a sensor are analyzed numerically. The choice of an input impulse function applied at the piezoelectric actuator is discussed from the perspective of the development of guided-wave-based structural health monitoring techniques for damage detection.

Circumference Damage Identification in a Pipe Using Mode Conversion of Longitudinal Guided Wave

2013 ◽  
Vol 395-396 ◽  
pp. 787-791
Author(s):  
Jing Wu ◽  
Wei Wei Zhang
Keyword(s):  
Damage Detection ◽  
Damage Identification ◽  
Mode Conversion ◽  
Guided Wave ◽  
Symmetric Mode ◽  
Axially Symmetric ◽  
Mode Transformation ◽  
Damage Location

This paper aims to develop a method to identify the damage location in circumference direction of a pipe using mode transformation of longitudinal guided wave. The corrosion-like damage in bimetal pipe is considered. Case study that damage detection for a bimetal pipe is used to show the validity and advantage of the proposed method. It can be found that the axially symmetric mode guided wave encounter the damage and the three modes were received in reflection. The damage location in circumferential directions could be identified by conversed modes measured at one position. The simulation shows a good performance.

scholarly journals Numerical Simulation on Micro-damage Detection In CFRP Composites Based on Nonlinear Ultrasonic Guided Waves

2021 ◽  
Keyword(s):  
Damage Detection ◽  
Composite Structures ◽  
Guided Waves ◽  
Second Harmonic ◽  
Wave Mode ◽  
Guided Wave ◽  
Reinforced Plastics ◽  
Matrix Cracks ◽  
Nonlinear Ultrasonic ◽  
Contact Acoustic Nonlinearity

Abstract. Micro-damages such as pores, closed delamination/debonding and fiber/matrix cracks in carbon fiber reinforced plastics (CFRP) are vital factors towards the performance of composite structures, which could collapse if defects are not detected in advance. Nonlinear ultrasonic technologies, especially ones involving guided waves, have drawn increasing attention for their better sensitivity to early damages than linear acoustic ones. The combination of nonlinear acoustics and guided waves technique can promisingly provide considerable accuracy and efficiency for damage assessment and materials characterization. Herein, numerical simulations in terms of finite element method are conducted to investigate the feasibility of micro-damage detection in multi-layered CFRP plates using the second harmonic generation (SHG) of asymmetric Lamb guided wave mode. Contact acoustic nonlinearity (CAN) is introduced into the constitutive model of micro-damages in composites, which leads to the distinct SHG compared with material nonlinearity. The results suggest that the generated second order harmonics due to CAN could be received and adopted for early damage evaluation without matching the phase of the primary waves.

scholarly journals Vibration Based Damage Detection of Rotating Beams

2018 ◽  
Vol 148 ◽  
pp. 14008 ◽  
Author(s):  
Stanislav Stoykov ◽  
Emil Manoach ◽  
Maosen Cao
Keyword(s):  
Damage Detection ◽  
Selection Criteria ◽  
Excitation Frequency ◽  
Real Life ◽  
Equation Of Motion ◽  
Damage Localization ◽  
Rotating Beam ◽  
Free Boundary Conditions ◽  
Wide Range ◽  
Detection And Localization

The early detection and localization of damages is essential for operation, maintenance and cost of the structures. Because the frequency of vibration cannot be controlled in real-life structures, the methods for damage detection should work for wide range of frequencies. In the current work, the equation of motion of rotating beam is derived and presented and the damage is modelled by reduced thickness. Vibration based methods which use Poincaré maps are implemented for damage localization. It is shown that for clamped-free boundary conditions these methods are not always reliable and their success depends on the excitation frequency. The shapes of vibration of damaged and undamaged beams are shown and it is concluded that appropriate selection criteria should be defined for successful detection and localization of damages.

Sign in / Sign up

Export Citation Format

Share Document