MECHANICAL PERFORMANCE OF VARIABLE STIFFNESS PLATES SUBJECTED TO MULTISCALE DEFECTS

2021 ◽  
Author(s):  
ALFONSO PAGANI ◽  
ALBERTO RACIONERO SANCHEZ-MAJANO ◽  
IGNACIO SANCHEZ ZARATE
Keyword(s):  
Material Properties ◽  
Mechanical Performance ◽  
Numerical Models ◽  
Ground Truth ◽  
Variable Stiffness ◽  
Stochastic Response ◽  
Carrera Unified Formulation ◽  
Manufacturing Techniques ◽  
And Performance ◽  
Spatially Varying

Novel manufacturing techniques that have arisen during the last decades have permitted to improve both the manufacturing quality and performance of laminates parts. Despite these improvements, such manufactured parts are not flaw-exempt, since uncertainty in the fabrication processes and in the material properties are still present. At the same time, numerical models that allow to describe the ground truth designs have been developed. Nevertheless, some defects have not been studied yet. This work aims to analyze the influence of spatially varying microscale defects on the mechanical performance of variable stiffness plates at both microscale and macroscale level. Attention has been paid to the usage of component-wise and layer-wise modeling, based on the Carrera Unified Formulation, to study the stochastic response of the micromechanical stresses and the macroscale buckling performance, respectively.

LATTICE STRUCTURE OPTIMIZATION WITH ORIENTATION-DEPENDENT MATERIAL PROPERTIES

2021 ◽  
pp. 1-33
Author(s):  
Conner Sharpe ◽  
Carolyn Seepersad
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Material Properties ◽  
Computational Models ◽  
Lattice Structure ◽  
Lattice Structures ◽  
Performance Improvements ◽  
Structural Applications ◽  
Manufacturing Techniques ◽  
And Performance

Abstract Advances in additive manufacturing techniques have enabled the production of parts with complex internal geometries. However, the layer-based nature of additive processes often results in mechanical properties that vary based on the orientation of the feature relative to the build plane. Lattice structures have been a popular design application for additive manufacturing due to their potential uses in lightweight structural applications. Many recent works have explored the modeling, design, and fabrication challenges that arise in the multiscale setting of lattice structures. However, there remains a significant challenge in bridging the simplified computational models used in the design process and the more complex properties actually realized in fabrication. This work develops a design approach that captures orientation-dependent material properties that have been observed in metal AM processes while remaining suitable for use in an iterative design process. Exemplar problems are utilized to investigate the potential design changes and performance improvements that can be attained by taking the directional dependence of the manufacturing process into account in the design of lattice structures.

Lattice Structure Optimization With Orientation-Dependent Material Properties

2020 ◽  
Author(s):  
Conner Sharpe ◽  
Carolyn Conner Seepersad
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Material Properties ◽  
Computational Models ◽  
Lattice Structure ◽  
Lattice Structures ◽  
Performance Improvements ◽  
Structural Applications ◽  
Manufacturing Techniques ◽  
And Performance

Abstract Advances in additive manufacturing techniques have enabled the production of parts with complex internal geometries. However, the layer-based nature of additive processes often results in mechanical properties that vary based on the orientation of the feature relative to the build plane. Lattice structures have been a popular design application for additive manufacturing due to their potential uses in lightweight structural applications. Many recent works have explored the modeling, design, and fabrication challenges that arise in the multiscale setting of lattice structures. However, there remains a significant challenge in bridging the simplified computational models used in the design process and the more complex properties actually realized in fabrication. This work develops a design approach that captures orientation-dependent material properties that have been observed in metal AM processes while remaining suitable for use in an iterative design process. Exemplar problems are utilized to investigate the potential design changes and performance improvements that can be attained by taking the directional dependence of the manufacturing process into account in the design of lattice structures.

scholarly journals Evaluating the accuracy and uncertainty of atmospheric and wave model hindcasts during severe events using model ensembles

2021 ◽  
Author(s):  
Ali Abdolali ◽  
Andre van der Westhuysen ◽  
Zaizhong Ma ◽  
Avichal Mehra ◽  
Aron Roland ◽  
...  
Keyword(s):  
Extreme Event ◽  
Numerical Models ◽  
Model Performance ◽  
Ground Truth ◽  
Wave Model ◽  
Atmospheric Model ◽  
Stationary Source ◽  
Source Point ◽  
Spectral Wave Model ◽  
Model Ensembles

AbstractVarious uncertainties exist in a hindcast due to the inabilities of numerical models to resolve all the complicated atmosphere-sea interactions, and the lack of certain ground truth observations. Here, a comprehensive analysis of an atmospheric model performance in hindcast mode (Hurricane Weather and Research Forecasting model—HWRF) and its 40 ensembles during severe events is conducted, evaluating the model accuracy and uncertainty for hurricane track parameters, and wind speed collected along satellite altimeter tracks and at stationary source point observations. Subsequently, the downstream spectral wave model WAVEWATCH III is forced by two sets of wind field data, each includes 40 members. The first ones are randomly extracted from original HWRF simulations and the second ones are based on spread of best track parameters. The atmospheric model spread and wave model error along satellite altimeters tracks and at stationary source point observations are estimated. The study on Hurricane Irma reveals that wind and wave observations during this extreme event are within ensemble spreads. While both Models have wide spreads over areas with landmass, maximum uncertainty in the atmospheric model is at hurricane eye in contrast to the wave model.

scholarly journals Preparation and Performance Evaluation of Duotone 3D-Printed Polyetheretherketone as Oral Prosthetic Materials: A Proof-of-Concept Study

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1949
Author(s):  
Ling Ding ◽  
Wei Lu ◽  
Jiaqi Zhang ◽  
Chuncheng Yang ◽  
Guofeng Wu
Keyword(s):  
Titanium Dioxide ◽  
Performance Evaluation ◽  
Mechanical Performance ◽  
Mechanical Tests ◽  
Flexural Properties ◽  
Proof Of Concept ◽  
Tooth Color ◽  
Dental Application ◽  
3D Printed ◽  
And Performance

Literature has reported the successful use of 3D printed polyetheretherketone (PEEK) to fabricate human body implants and oral prostheses. However, the current 3D printed PEEK (brown color) cannot mimic the vivid color of oral tissues and thus cannot meet the esthetical need for dental application. Therefore, titanium dioxide (TiO2) and ferric oxide (Fe2O3) were incorporated into PEEK to prepare a series of tooth-color and gingival-color PEEK composites in this study. Through color measurements and mechanical tests, the color value and mechanical performance of the 3D printed PEEK composites were evaluated. In addition, duotone PEEK specimens were printed by a double nozzle with an interface between tooth-color and gingival-color parts. The mechanical performance of duotone PEEK with two different interfaces (horizontal and vertical) was investigated. With the addition of TiO2 and Fe2O3, the colors of 3D printed PEEK composites become closer to that of dental shade guides. 3D printed PEEK composites generally demonstrated superior tensile and flexural properties and hence have great potential in the dental application. In addition, duotone 3D printed PEEK with a horizontal interfacial orientation presented better mechanical performance than that with a vertical one.

scholarly journals Evaluating effects of focal length and viewing angle in a comparison of recent face landmark and alignment methods

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Xiang Li ◽  
Jianzheng Liu ◽  
Jessica Baron ◽  
Khoa Luu ◽  
Eric Patterson
Keyword(s):  
Focal Length ◽  
Ground Truth ◽  
Detection Methods ◽  
Viewing Angle ◽  
Deep Convolutional Neural Networks ◽  
Landmark Detection ◽  
High Performing ◽  
Detection Techniques ◽  
And Performance ◽  
Lens Focal Length

AbstractRecent attention to facial alignment and landmark detection methods, particularly with application of deep convolutional neural networks, have yielded notable improvements. Neither these neural-network nor more traditional methods, though, have been tested directly regarding performance differences due to camera-lens focal length nor camera viewing angle of subjects systematically across the viewing hemisphere. This work uses photo-realistic, synthesized facial images with varying parameters and corresponding ground-truth landmarks to enable comparison of alignment and landmark detection techniques relative to general performance, performance across focal length, and performance across viewing angle. Recently published high-performing methods along with traditional techniques are compared in regards to these aspects.

A virtual test environment for validating spacecraft optical navigation

2013 ◽  
Vol 117 (1197) ◽  
pp. 1075-1101 ◽  
Author(s):  
S. M. Parkes ◽  
I. Martin ◽  
M. N. Dunstan ◽  
N. Rowell ◽  
O. Dubois-Matra ◽  
...  
Keyword(s):  
Small Body ◽  
European Space Agency ◽  
Ground Truth ◽  
Camera Motion ◽  
Test Environment ◽  
Space Applications ◽  
Vision Guidance ◽  
Space Agency ◽  
Wide Range ◽  
And Performance

Abstract The use of machine vision to guide robotic spacecraft is being considered for a wide range of missions, such as planetary approach and landing, asteroid and small body sampling operations and in-orbit rendezvous and docking. Numerical simulation plays an essential role in the development and testing of such systems, which in the context of vision-guidance means that realistic sequences of navigation images are required, together with knowledge of the ground-truth camera motion. Computer generated imagery (CGI) offers a variety of benefits over real images, such as availability, cost, flexibility and knowledge of the ground truth camera motion to high precision. However, standard CGI methods developed for terrestrial applications lack the realism, fidelity and performance required for engineering simulations. In this paper, we present the results of our ongoing work to develop a suitable CGI-based test environment for spacecraft vision guidance systems. We focus on the various issues involved with image simulation, including the selection of standard CGI techniques and the adaptations required for use in space applications. We also describe our approach to integration with high-fidelity end-to-end mission simulators, and summarise a variety of European Space Agency research and development projects that used our test environment.

scholarly journals Additive Manufacturing of Flexible Material for Pneumatic Actuators Application

Actuators ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 161
Author(s):  
Miranda Fateri ◽  
João Falcão Carneiro ◽  
Achim Frick ◽  
João Bravo Pinto ◽  
Fernando Gomes de Almeida
Keyword(s):  
Material Properties ◽  
Thermoplastic Polyurethane ◽  
Scanning Calorimetry ◽  
Pneumatic Actuators ◽  
Geometry Design ◽  
Flexible Material ◽  
Layer Manufacturing ◽  
Thermoplastic Polyurethane Elastomer ◽  
Manufacturing Techniques ◽  
Circular Design

In this paper, endurance of peristaltic linear pneumatic actuators was studied using different hose geometries. Towards this goal, different hose geometries were additively manufactured using Fused Layer Manufacturing techniques of Thermoplastic Polyurethane Elastomer. Material properties of the elastomer were studied using Differential Scanning Calorimetry and the tensile test. The relations between the sample’s print temperature and build direction on the actuator endurance were investigated. Lastly, the relation between the geometry design of the PLPA actuator and its endurance is also discussed. Based on this methodology, authors present results showing that the use of a customized shaped hose with geometrical reinforcement at sides leads to a considerable rise in the hose endurance, when compared with the conventional circular design.

Role of drug substance material properties in the processibility and performance of a wet granulated product

2009 ◽  
Vol 374 (1-2) ◽  
pp. 96-105 ◽  
Author(s):  
Chandra Vemavarapu ◽  
Madhu Surapaneni ◽  
Munir Hussain ◽  
Sherif Badawy
Keyword(s):  
Material Properties ◽  
Drug Substance ◽  
And Performance
Sign in / Sign up

Export Citation Format

Share Document