scholarly journals Complex Assessment of Underground Water Sources’ Quality in Khabarovsk City Territory

2016 ◽  
Vol 5 (4) ◽  
pp. 30-37
Author(s):  
Андреев ◽  
A. Andreev ◽  
Кондратьева ◽  
L. Kondrateva
Keyword(s):  
Water Quality ◽  
Fresh Water ◽  
Water Quality Monitoring ◽  
Underground Water ◽  
Water Sources ◽  
Water Supply Systems ◽  
Potential Risks ◽  
Heavy Metals Ions ◽  
First Time ◽  
Supply Systems

In case of water bodies’ surface contamination the water supply systems based on underground sources could supply of fresh water to the urban population with maximum guaranteed safety. In emergency the entire resource of underground water sources is used, including shallow water intakes and individual wells. The results of the complex research for the quality of fresh water taken from wells located in Khabarovsk city districts with different anthropogenic charge levels are considered in this paper. For the first time the fresh water quality monitoring aimed to potential risks estimation was held using the indicators of radon’s volumetric activity. The assessment for a seasonal variation of the fresh water quality by the microbiological indicators and the heavy metals ions quantity has been presented.

Methodological Approaches to Organization of Drinking Water Quality Monitoring Programs

2020 ◽  
pp. 4-8
Author(s):  
Yu.A. Novikova ◽  
I.O. Myasnikov ◽  
A.A. Kovshov ◽  
N.A. Tikhonova ◽  
N.S. Bashketova
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Supply ◽  
Cold Water ◽  
Water Quality Monitoring ◽  
Drinking Water Quality ◽  
Quality Monitoring ◽  
Water Supply Systems ◽  
Monitoring Programs ◽  
Supply Systems

Summary. Introduction: Drinking water is one of the most important environmental factors sustaining life and determining human health. The goal of the Russian Federal Clean Water Project is to improve drinking water quality through upgrading of water treatment and supply systems using advanced technologies, including those developed by the military-industrial complex. The most informative and reliable sources of information for assessing drinking water quality are the results of systematic laboratory testing obtained within the framework of socio-hygienic monitoring (SGM) and production control carried out by water supply organizations. The objective of our study was to formulate approaches to organizing quality monitoring programs for centralized cold water supply systems. Materials and methods: We reviewed programs and results of drinking water quality laboratory tests performed by Rospotrebnadzor bodies and institutions within the framework of SGM in 2017–2018. Results: We established that drinking water quality monitoring in the constituent entities of the Russian Federation differs significantly in the number of monitoring points (566 in the Krasnoyarsk Krai vs 10 in Sevastopol) and measured indicators, especially sanitary and chemical ones (53 inorganic and organic substances in the Kemerovo Region vs one indicator in the Amur Region). Discussion: For a more complete and objective assessment of drinking water quality in centralized cold water supply systems, monitoring points should be organized at all stages of water supply with account for the coverage of the maximum number of people supplied with water from a particular network. Thus, the number of points in the distribution network should depend, inter alia, on the size of population served. In urban settlements with up to 10,000 inhabitants, for example, at least 4 points should be organized while in the cities with more than 3,000,000 inhabitants at least 80 points are necessary. We developed minimum mandatory lists of indicators and approaches to selecting priority indices to be monitored at all stages of drinking water supply.

scholarly journals Managing Water Quality in Intermittent Supply Systems: The Case of Mukono Town, Uganda

Water ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 806
Author(s):  
Takuya Sakomoto ◽  
Mahmood Lutaaya ◽  
Edo Abraham
Keyword(s):  
Water Quality ◽  
Water Supply ◽  
Health Hazard ◽  
Water Quality Monitoring ◽  
Economic Feasibility ◽  
Water Supply Systems ◽  
Chemical Contamination ◽  
Intermittent Water Supply ◽  
The Impact ◽  
Supply Systems

Intermittent water supply networks risk microbial and chemical contamination through multiple mechanisms. In particular, in the cities of developing countries, where intrusion through leaky pipes are more prevalent and the sanitation systems coverage is low, contaminated water can be a public health hazard. Although countries using intermittent water supply systems aim to change to continuous water supply systems—for example, Kampala city is targeting to change to continuous water supply by 2025 through an expansion and rehabilitation of the pipe infrastructure—it is unlikely that this transition will happen soon because of rapid urbanisation and economic feasibility challenges. Therefore, water utilities need to find ways to supply safe drinking water using existing systems until gradually changing to a continuous supply system. This study describes solutions for improving water quality in Mukono town in Uganda through a combination of water quality monitoring (e.g., identifying potential intrusion hotspots into the pipeline using field measurements) and interventions (e.g., booster chlorination). In addition to measuring and analyses of multiple chemical and microbial water quality parameters, we used EPANET 2.0 to simulate the water quality dynamics in the transport pipeline to assess the impact of interventions.

scholarly journals Network Model Analysis of Residual Chlorine to Reduce Disinfection Byproducts in Water Supply Systems in Yangon City, Myanmar

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2921
Author(s):  
Nwe Nwe Zin ◽  
Shinobu Kazama ◽  
Satoshi Takizawa
Keyword(s):  
Water Quality ◽  
Water Supply ◽  
Tap Water ◽  
Water Quality Monitoring ◽  
Disinfection Byproducts ◽  
Residual Chlorine ◽  
Water Supply Systems ◽  
Formation Kinetics ◽  
Chlorine Decay ◽  
Supply Systems

In Yangon City, chlorination commenced in January 2020 to supply drinkable water; therefore, there is as yet no information on chlorine decay and DBP formation in the water supply system. This study aimed to find methods to optimize chlorine dosage in Yangon City. Onsite sampling and laboratory analyses of residual chlorine and trihalomethane (THM) formation, as well as water quality simulations, were conducted to find the chlorine decay and THM formation kinetics. Due to a high chlorine dose of 2 mg/L for both pre- and post-chlorination, disinfection was effective despite the low removal efficiency of turbidity. However, THMs were found in high levels in both treated and tap water due to the high THM formation potential of raw water. The re-contamination and/or transformation of dissolved organic matter were found in the distribution network by increases in specific ultraviolet absorption (SUVA) values and excitation-emission matrix (EEM) fluorophores, which brought about variations of THMs in the networks. The EPANET models were run assuming there to be no water leakages; it was found that the chlorine dose could be decreased to 0.8 mg/L to meet the guidelines for THMs and residual chlorine. The methods employed in this study could be also applied in other water supply systems in tropical developing countries with limited water quality monitoring data.

Production Control as a Component of Drinking Water Quality Monitoring

2020 ◽  
pp. 9-14
Author(s):  
IO Myasnikov ◽  
YuA Novikova ◽  
OS Alenteva ◽  
GB Yeremin ◽  
PA Ganichev
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Production Control ◽  
Cold Water ◽  
Water Quality Monitoring ◽  
Drinking Water Quality ◽  
Quality Monitoring ◽  
Water Supply Systems ◽  
Organization Of Production ◽  
Supply Systems

Summary. Introduction: In order to conduct a more precise and objective assessment of drinking water quality in the centralized cold water supply systems, it is essential to increase the coverage of population with laboratory control. It is therefore expedient to consider the possibility of using production control data collected within the drinking water quality monitoring system and including them in statistical reporting forms of Rospotrebnadzor for subsequent accounting when assessing the implementation of the Russian Federal Clean Water Project within the National Ecology Project. Our objective was to substantiate requirements for organization of production control of drinking water with considering a further use of its results in assessing drinking water quality. The materials of the research included current regulations and literature data. We applied methods of sanitary and epidemiologic expert examination, assessment and survey as well as methods of systemic and content analysis. Results: To evaluate the supply of the population with high-quality drinking water, it is important to consider not only test results collected within the framework of the federal state sanitary and epidemiologic surveillance but also the results of production control carried out by legal entities and individual entrepreneurs operating centralized cold water supply systems. However, organization of production control and the use of its results is usually associated with such problems as the choice of the most representative sampling points, identification of a sufficient list of controlled indicators, quality of results, etc. Conclusions: Before including the results of drinking water quality production control in the drinking water quality monitoring system, it is necessary to set the requirements for selecting monitoring sites, analytes, frequency of testing, etc. To legitimize the use of production control results, it is important to develop regulations that oblige organizations carrying out production control of drinking water quality to submit their results to Rospotrebnadzor bodies and institutions for their use in comprehensive drinking water quality assessments.

scholarly journals Monitoring of heavy metals in selected Water Supply Systems in Poland, in relation to current regulations

2018 ◽  
Vol 30 ◽  
pp. 01017
Author(s):  
Agnieszka Szuster-Janiaczyk ◽  
Piotr Zeuschner ◽  
Paweł Noga ◽  
Marta Skrzypczak
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Water Supply ◽  
Tap Water ◽  
Water Quality Monitoring ◽  
Quality Monitoring ◽  
Water Supply Systems ◽  
Legal Regulations ◽  
Raw Water ◽  
Supply Systems

The study presents an analysis of water quality monitoring in terms of the content of heavy metals, which is conducted in three independent water supply systems in Poland. The analysis showed that the monitoring of heavy metals isn't reliable - both the quantity of tested water samples and the location of the monitoring points are the problem. The analysis of changes in water quality from raw water to tap water was possible only for one of the analysed systems and indicate a gradual deterioration of water quality, although still within acceptable limits of legal regulations.

Sign in / Sign up

Export Citation Format

Share Document