scholarly journals Novel approaches for robust polaritonics

2015 ◽  
Author(s):  
Rahul Jayaprakash

The possibility of having low-threshold, inversion-less lasers, makinguse of the macroscopic occupation, of the low density of states, at thebottom of the lower polariton branch, has intensified polariton researchin the last two decades. State of the art devices based on this admixedquasiparticle have already been realized using GaAs and CdTe active layers,although the accomplishment of room temperature lasers has beenlimited by their relatively weak exciton binding energy. The high excitonbinding energy and oscillator strength, as well as the advantageous relaxationdynamics of wide bandgap semiconductors, such as GaN, are wellsuited for room temperature polariton operation. The up to date demonstrationsof GaN based polariton lasers have used as the active layer bulkGaN, GaN quantum wells (QW’s), and GaN nanowires. In the latterapproach, individual nanowires are positioned in a microcavity showingremarkable polariton characteristics, but questions remain on the scalabilityof the approach, as well as on how to turn these nanowire-basedstructures into real electrically-injected devices. The former two casesare technologically viable, but are currently limited by the relatively poorquality of the active region, due to the structural disorder introduced bythe bottom GaN based Distributed Bragg Reflector (DBR) mirrors.In this thesis, a very straightforward processing technique is used toetch away an InGaN sacrificial layer, using photo-electrochemical (PEC)etching, creating ultra-smooth membranes containing GaN/AlGaN QW’s,which are then embedded between high quality dielectric DBR mirrors,on which polaritonic studies are performed. The GaN membrane or the active region is carefully engineered, ensuring superior optical properties,both prior to and after etching. At room temperature, the QW emission isstate of the art, with a linewidth of ~ 28meV, and a corresponding lifetimeof ~ 275ps. The PEC lateral etching parameters are optimised in sucha way, that the rms roughness of the membranes, measured by AtomicForce Microscopy (AFM), is as small as 0.65nm, very close to epitaxialquality. A temperature dependent study on the full-microcavity structure,unveils the strong coupling regime, exhibiting a robust Rabi splittingas large as 64meV at room temperature. The non-linear propertiesare examined, under non-resonant quasi-continuous excitation, with polaritonlasing demonstrated at an ultra-low, average threshold of ~ 4.5W/ cm2(~ 594μJ / cm2), the lowest ever reported for a 2D GaN basedsystem, accompanied by a spectacular condensation pattern in k-space.The latter is attributed to a site-specific polariton trapping mechanism,where polaritons accumulate in discrete levels within the trapping potential,helping to escalate the polariton density locally. This, along with thehigh optical quality of the all-dielectric microcavity (Q-factor ~ 1770), explainsthe obtained ultra-low threshold. It should be noted that the useof ultra-smooth GaN membranes in microcavities is fully compatible withthe realisation of electrically injected GaN polariton devices.In the direction of obtaining even more robust polaritonic devices, thebasic optical properties of high quality, strain free, GaN nanowires arestudied. However, to make the most out of this novel system, the absorptioncoefficients are extracted from as-grown GaN nanowires, on silicon<111>substrates, developing an all-optical method, analysing merelythe reflectivity spectra, which is demonstrated for the first time. It shouldbe noted that the absorption coefficients (directly proportional to oscillator strengths) corresponding to the excitons, provide a glance into theappropriateness of the respective GaN nanowire system, as optimal candidatesfor hefty polaritonics. However, the nanowires studied here, failedto shown an enhancement of absorption, which can be mainly attributedto the nanowire dimensions. The new method demonstrated here, can beextended to any family of nanowires, provided they are grown on a substratehaving considerable difference in permittivity with the nanowire-airmatrix.

Nanophotonics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 559-575 ◽  
Author(s):  
Ora Bitton ◽  
Satyendra Nath Gupta ◽  
Gilad Haran

AbstractThe complementary optical properties of surface plasmon excitations of metal nanostructures and long-lived excitations of semiconductor quantum dots (QDs) make them excellent candidates for studies of optical coupling at the nanoscale level. Plasmonic devices confine light to nanometer-sized regions of space, which turns them into effective cavities for quantum emitters. QDs possess large oscillator strengths and high photostability, making them useful for studies down to the single-particle level. Depending on structure and energy scales, QD excitons and surface plasmons (SPs) can couple either weakly or strongly, resulting in different unique optical properties. While in the weak coupling regime plasmonic cavities (PCs) mostly enhance the radiative rate of an emitter, in the strong coupling regime the energy level of the two systems mix together, forming coupled matter-light states. The interaction of QD excitons with PCs has been widely investigated experimentally as well as theoretically, with an eye on potential applications ranging from sensing to quantum information technology. In this review we provide a comprehensive introduction to this exciting field of current research, and an overview of studies of QD-plasmon systems in the weak and strong coupling regimes.


1994 ◽  
Vol 339 ◽  
Author(s):  
I. Akasaki ◽  
H. Amano

ABSTRACTHigh-quality AlGaN/GaN and AlGaN/GalnN DHs were fabricated by MOVPE using low-temperature deposited AlN buffer layer. We applied the newly designed dual-flow-channel reactor, by which high-quality and well-controlled AlGaN and GalnN alloys and their heterostructures have been grown. AlGaN/GaN-DH shows low-threshold stimulated emission by optical pumping at room temperature for both edge and surface modes. The peak wavelength of stimulated emission for edge mode was 369.5nm. The peak wavelength of stimulated emission was affected by the strain due to heterostructure as well as the many body effect under high excitation. The wavelength for stimulated emission can be widely changed by using GalnN as the active layer. AlGaN/GalnN DH with InN molar fraction of the active layer of 0.09 shows room temperature low-threshold stimulated emission for edge mode by optical pumping with peak wavelength of 402.5nm. A few mW-class symmetrical AlGaN/GaN DH LED and anti symmetrical AlGaN/GalnN/GaN DH LED using low energy electron beam irradiation (LEEB1) treated Mg-doped P-AlGaN cladding layer were fabricated. These results show that column-Ill nitrides are promising for the realization of practical short wavelength LED and LD.


Nanoscale ◽  
2018 ◽  
Vol 10 (46) ◽  
pp. 21928-21935 ◽  
Author(s):  
Min Wu ◽  
Yixuan Wang ◽  
Hongyu Wang ◽  
Hao Wang ◽  
Yongming Sui ◽  
...  

We developed a new phosphine-free strategy for fabricating high-quality metal telluride nanocrystals (NCs) by using a highly reactive Te precursor coordinated at room temperature. These metal telluride NCs with good optical properties possess excellent application prospects.


2002 ◽  
Vol 737 ◽  
Author(s):  
Z. Y. Zhang ◽  
Ch. M. Li ◽  
P. Jin ◽  
X. Q. Meng ◽  
B. Xu ◽  
...  

ABSTRACTWe have investigated the optical properties of asymmetric multiple layer stacked self-assembled InAs quantum dot with different interlayer. We found that asymmetric multiple stacked QD samples with In0.2Ga0.8As + GaAs interlayer can afford a 180nm flat spectral width with strong PL intensity compared to other samples at room temperature. We think this result is due to the introduction of In0.2Ga0.8As strain-reducing layer. Additionally, for the broad spectral width and the strong PL intensity, this structure can be a promising candidate for quantum-dot superluminescent diodes.


Author(s):  
Alexey V. Kavokin ◽  
Jeremy J. Baumberg ◽  
Guillaume Malpuech ◽  
Fabrice P. Laussy

In this Chapter we address the physics of Bose-Einstein condensation and its implications to a driven-dissipative system such as the polariton laser. We discuss the dynamics of exciton-polaritons non-resonantly pumped within a microcavity in the strong coupling regime. It is shown how the stimulated scattering of exciton-polaritons leads to formation of bosonic condensates that may be stable at elevated temperatures, including room temperature.


2021 ◽  
Vol 1851 (1) ◽  
pp. 012006
Author(s):  
V O Gridchin ◽  
R R Reznik ◽  
K P Kotlyar ◽  
A S Dragunova ◽  
L N Dvoretckaia ◽  
...  

Nanophotonics ◽  
2020 ◽  
Vol 9 (14) ◽  
pp. 4233-4252
Author(s):  
Yael Gutiérrez ◽  
Pablo García-Fernández ◽  
Javier Junquera ◽  
April S. Brown ◽  
Fernando Moreno ◽  
...  

AbstractReconfigurable plasmonics is driving an extensive quest for active materials that can support a controllable modulation of their optical properties for dynamically tunable plasmonic structures. Here, polymorphic gallium (Ga) is demonstrated to be a very promising candidate for adaptive plasmonics and reconfigurable photonics applications. The Ga sp-metal is widely known as a liquid metal at room temperature. In addition to the many other compelling attributes of nanostructured Ga, including minimal oxidation and biocompatibility, its six phases have varying degrees of metallic character, providing a wide gamut of electrical conductivity and optical behavior tunability. Here, the dielectric function of the several Ga phases is introduced and correlated with their respective electronic structures. The key conditions for optimal optical modulation and switching for each Ga phase are evaluated. Additionally, we provide a comparison of Ga with other more common phase-change materials, showing better performance of Ga at optical frequencies. Furthermore, we first report, to the best of our knowledge, the optical properties of liquid Ga in the terahertz (THz) range showing its broad plasmonic tunability from ultraviolet to visible-infrared and down to the THz regime. Finally, we provide both computational and experimental evidence of extension of Ga polymorphism to bidimensional two-dimensional (2D) gallenene, paving the way to new bidimensional reconfigurable plasmonic platforms.


2021 ◽  
Vol 127 ◽  
pp. 105690
Author(s):  
A. Sáenz-Trevizo ◽  
D. Kuchle-Mena ◽  
P. Pizá-Ruiz ◽  
P. Amézaga-Madrid ◽  
O. Solís-Canto ◽  
...  

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 892
Author(s):  
Jicong Zhao ◽  
Zheng Zhu ◽  
Haiyan Sun ◽  
Shitao Lv ◽  
Xingyu Wang ◽  
...  

This paper presents a micro-electro-mechanical systems (MEMS) processing technology for Aluminum Nitride (AlN) Lamb-wave resonators (LWRs). Two LWRs with different frequencies of 402.1 MHz and 2.097 GHz by varying the top interdigitated (IDT) periods were designed and fabricated. To avoid the shortcomings of the uncontrollable etching of inactive areas during the releasing process and to improve the fabrication yield, a thermal oxide layer was employed below the platted polysilicon sacrificial layer, which could define the miniaturized release cavities well. In addition, the bottom Mo electrode that was manufactured had a gentle inclination angle, which could contribute to the growth of the high-quality AlN piezoelectric layer above the Mo layer and effectively prevent the device from breaking. The measured results show that the IDT-floating resonators with 12 μm and 2 μm electrode periods exhibit a motional quality factor (Qm) as high as 4382 and 1633. The series resonant frequency (fs)·Qm values can reach as high as 1.76 × 1012 and 3.42 × 1012, respectively. Furthermore, Al is more suitable as the top IDT material of the AlN LWRs than Au, and can contribute to achieving an excellent electrical performances due to the smaller density, smaller thermo-elastic damping (TED), and larger acoustic impedance difference between Al and AlN.


Sign in / Sign up

Export Citation Format

Share Document