scholarly journals 从中碳强度指数看上海碳减排的足迹Shanghai Carbon Emission Reduction in General, by SINO Carbon Intensity Index

2013 ◽  
Vol 03 (04) ◽  
pp. 108-115
Author(s):  
黄 明蔚
Keyword(s):  
Emission Reduction ◽  
Carbon Emission ◽  
Carbon Intensity ◽  
Carbon Emission Reduction ◽  
Intensity Index

scholarly journals Scheduling Optimization of a Cabinet Refrigerator Incorporating a Phase Change Material to Reduce Its Indirect Environmental Impact

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2154
Author(s):  
Angelo Maiorino ◽  
Adrián Mota-Babiloni ◽  
Manuel Gesù Del Duca ◽  
Ciro Aprea
Keyword(s):  
Phase Change ◽  
Emission Reduction ◽  
Energy Demand ◽  
Carbon Emission ◽  
Phase Change Materials ◽  
Demand Curve ◽  
Optimization Technique ◽  
Intensity Variation ◽  
Carbon Intensity ◽  
Carbon Emission Reduction

Phase Change Materials (PCMs) incorporated in refrigerators can be used to shift their energy consumption from peak periods, when the electric network energy demand is the highest, to off-peak periods. While PCMs can flatten the energy demand curve, they can achieve economic savings if Time-of-Use (TOU) electricity tariffs are applied. However, the hourly carbon emission factor is not commonly linked to the hourly tariff, and the final CO2 emitted due to the operations of the refrigerator would not be fully optimized. In this work, a method based on the Simulated Annealing optimization technique was proposed to identify the optimal working schedule of a cabinet refrigerator incorporating a PCM to reduce its indirect carbon emissions. Data from countries with different representative carbon intensity profiles were used. The normalized standard deviation and normalized range are the best statistical indexes to predict carbon emission reduction in the proposed solution. These parameters proved that countries with a higher hourly carbon intensity variation (Uruguay, France, Denmark, and Germany) benefit from the application of the algorithm. Cost and carbon emission reduction cannot be maximized simultaneously, and a trade-off is required.

scholarly journals Development and Utilization of Renewable Energy Based on Carbon Emission Reduction—Evaluation of Multiple MCDM Methods

2021 ◽  
Vol 13 (17) ◽  
pp. 9822
Author(s):  
Tao Li ◽  
Ang Li ◽  
Yimiao Song
Keyword(s):  
Renewable Energy ◽  
Wind Power ◽  
Carbon Emissions ◽  
Emission Reduction ◽  
Carbon Emission ◽  
Carbon Intensity ◽  
High Carbon ◽  
Carbon Emission Reduction ◽  
Photovoltaic Power ◽  
Development And Utilization

With the proposed target of carbon peak and carbon neutralization, the development and utilization of renewable energy with the goal of carbon emission reduction is becoming increasingly important in China. We used the analytic hierarchy process (ANP) and a variety of MCDM methods to quantitatively evaluate renewable energy indicators. This study measured the sequence and differences of the development and utilization of renewable energy in different regions from the point of view of carbon emission reduction, which provides a new analytical perspective for the utilization and distribution of renewable energy in China and a solution based on renewable energy for achieving the goal of carbon emission reduction as soon as possible. The reliability of the evaluation system was further enhanced by confirmation through a variety of methods. The results show that the environment and carbon dimensions are the primary criteria to evaluate the priority of renewable energy under carbon emission reduction. In the overall choice of renewable energy, photovoltaic energy is the best solution. After dividing regions according to carbon emission intensity and resource endowment, areas with serious carbon emissions are suitable for the development of hydropower; areas with sub-serious carbon emissions should give priority to the development of photovoltaic or wind power; high-carbon intensity area I should vigorously develop wind power; high-carbon intensity area II should focus on developing photovoltaic power; second high-carbon intensity areas I and II are suitable for the development of wind power and photovoltaic power; and second high-carbon intensity areas III and IV are the most suitable for hydropower.

scholarly journals Carbon Emission Estimation of Assembled Composite Concrete Beams during Construction

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1810
Author(s):  
Kaitong Xu ◽  
Haibo Kang ◽  
Wei Wang ◽  
Ping Jiang ◽  
Na Li
Keyword(s):  
Life Cycle ◽  
Carbon Emissions ◽  
Emission Reduction ◽  
Carbon Emission ◽  
Composite Beams ◽  
Total Carbon ◽  
Construction Process ◽  
Low Carbon ◽  
Carbon Emission Reduction ◽  
The Government

At present, the issue of carbon emissions from buildings has become a hot topic, and carbon emission reduction is also becoming a political and economic contest for countries. As a result, the government and researchers have gradually begun to attach great importance to the industrialization of low-carbon and energy-saving buildings. The rise of prefabricated buildings has promoted a major transformation of the construction methods in the construction industry, which is conducive to reducing the consumption of resources and energy, and of great significance in promoting the low-carbon emission reduction of industrial buildings. This article mainly studies the calculation model for carbon emissions of the three-stage life cycle of component production, logistics transportation, and on-site installation in the whole construction process of composite beams for prefabricated buildings. The construction of CG-2 composite beams in Fujian province, China, was taken as the example. Based on the life cycle assessment method, carbon emissions from the actual construction process of composite beams were evaluated, and that generated by the composite beam components during the transportation stage by using diesel, gasoline, and electric energy consumption methods were compared in detail. The results show that (1) the carbon emissions generated by composite beams during the production stage were relatively high, accounting for 80.8% of the total carbon emissions, while during the transport stage and installation stage, they only accounted for 7.6% and 11.6%, respectively; and (2) during the transportation stage with three different energy-consuming trucks, the carbon emissions from diesel fuel trucks were higher, reaching 186.05 kg, followed by gasoline trucks, which generated about 115.68 kg; electric trucks produced the lowest, only 12.24 kg.

Sign in / Sign up

Export Citation Format

Share Document