scholarly journals Excess sound absorption at normal incidence by two microperforated panel absorbers with different impedance

2011 ◽  
Vol 32 (5) ◽  
pp. 194-200 ◽  
Author(s):  
Motoki Yairi ◽  
Kimihiro Sakagami ◽  
Kenichi Takebayashi ◽  
Masayuki Morimoto
Keyword(s):  
Sound Absorption ◽  
Normal Incidence

scholarly journals Simulation of Normal Incidence Sound Absorption Coefficients of Perforated Panels With/Without Glass Wool by Transmission Line Parameters in a Two-Port Network

2016 ◽  
Vol 44 ◽  
pp. 123-130
Author(s):  
Takayoshi Nakai
Keyword(s):  
Transmission Line ◽  
Input Impedance ◽  
Thermal Conduction ◽  
Sound Absorption ◽  
Sound Propagation ◽  
Viscous Friction ◽  
Normal Incidence ◽  
Glass Wool ◽  
Absorption Coefficients ◽  
Transfer Function Method

This paper describes simulation of normal incidence sound absorption coefficients of perforated panels by transmission line parameters in a two-port network. Maa and Sakagami have investigated micro perforated panels, MPP. But their theories can treat only near 1 % perforation rates of perforated panels with back cavities. If sound propagates as a plane wave, sound propagation can be represented as transmission line parameters in a two-port network. Perforated panels, back cavities, and glass wool absorption materials are represented as matrix of transmission line parameters, respectively. Transmission line parameters of a perforated panel with a back cavity are calculated as multiplication of their matrices. An input impedance can be calculated from the transmission line parameters. A normal incident absorption coefficient is calculated from the input impedance. Holes of the perforated panels have losses of viscous friction and thermal conduction at their walls. Simulations are done in the condition of 0.25 mm to 5 mm diameters of holes, 0.25 % to 25 % perforation rates, 0.5 mm to 5 mm thickness of the perforated panels with back cavities in which there are or are not glass wool absorption materials. The results of these simulations are good agreements with the results of our measurements by transfer function method except in the condition of more than 1 mm diameter of holes.

Investigation of a Compound Perforated Panel Absorber With Backing Cavities Partially Filled With Polymer Materials

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
C. Q. Wang ◽  
Y. S. Choy
Keyword(s):  
Sound Absorption ◽  
Normal Incidence ◽  
Polyester Fiber ◽  
Polymer Materials ◽  
Element Simulation ◽  
Parallel Arrangement ◽  
Cavity Configuration ◽  
Absorption Performance ◽  
Good Agreement ◽  
Panel Absorber

The paper concerns the sound absorption performance of a compound absorber which consists of a parallel arrangement of multiple perforated panel absorbers of different backing cavity depths partially filled with poroelastic polymer materials. Three polymer materials are considered: expandable polystyrene (EPS) foam, polymethacrylimide (PMI) foam, and polyester fiber. The normal incidence sound absorption coefficients of the compound panel absorber are tested experimentally. Results show that the former two foams can achieve similar absorption performance to the rigid cavity configuration, while the resonances shift to lower frequencies due to the changes of effective cavity depths. It is also found that the additional attenuation by polymer foams may improve sound absorption, but the effect is marginal. For polyester fiber, results show that it performs more like a single perforated panel absorber. Finite element simulation of the compound panel absorber is also discussed, and good agreement is observed between simulated and experimental results.

Sound Absorption Measurements and Numerical Estimation of Non Acoustical Parameters of some Moroccan Raw Green Materials

2014 ◽  
Vol 1051 ◽  
pp. 95-101
Author(s):  
Garoum Mohammed ◽  
Chaimaa Benayad
Keyword(s):  
Sound Absorption ◽  
Normal Incidence ◽  
Optimization Techniques ◽  
Acoustical Parameters ◽  
Acoustical Properties ◽  
Thermal Insulating ◽  
Green Materials ◽  
Direct Measurements ◽  
Inverse Estimation ◽  
Absorption Measurements

Knowledge of acoustical properties of granular and fibrous sustainable materials has been stimulated thanks to their rather easy handling and durability. In this work direct measurements of the normal incidence sound absorption coefficient of three non consolidated materials (esparto fibers, cork and perlite) have been carried out using the so-called transfer function method. These materials are plentiful in Morocco and they require low amounts of energy for processing, which makes them attractive as either thermal insulating or sound absorbing materials. Results show that the acoustical efficiency of studied materials is comparable to traditional materials. In addition, an inverse estimation of non acoustical parameters (flow resistivity, tortuosity and porosity) of these materials has been performed introducing a new predictability approach. This is based on Global Sensitivity Analysis combined with Global Numerical Optimization Techniques, regarding most usual mathematical models.

scholarly journals Extrusion Foaming of Lightweight Polystyrene Composite Foams with Controllable Cellular Structure for Sound Absorption Application

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 106 ◽  
Author(s):  
Yanpei Fei ◽  
Wei Fang ◽  
Mingqiang Zhong ◽  
Jiangming Jin ◽  
Ping Fan ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Cellular Structure ◽  
Sound Absorption ◽  
Lignin Content ◽  
Normal Incidence ◽  
Sound Absorption Coefficient ◽  
Multiwall Carbon Nanotube ◽  
Nucleation Effect ◽  
Composite Foams ◽  
Extrusion Foaming

Polymer foams are promising for sound absorption applications. In order to process an industrial product, a series of polystyrene (PS) composite foams were prepared by continuous extrusion foaming assisted by supercritical CO2. Because the cell size and cell density were the key to determine the sound absorption coefficient at normal incidence, the bio-resource lignin was employed for the first time to control the cellular structure on basis of hetero-nucleation effect. The sound absorption range of the PS/lignin composite foams was corresponding to the cellular structure and lignin content. As a result, the maximum sound absorption coefficient at normal incidence was higher than 0.90. For a comparison, multiwall carbon nanotube (MWCNT) and micro graphite (mGr) particles were also used as the nucleation agent during the foaming process, respectively, which were more effective on the hetero-nucleation effect. The mechanical property and thermal stability of various foams were measured as well. Lignin showed a fire retardant effect in PS composite foam.

Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering

2009 ◽  
Vol 1188 ◽  
Author(s):  
Miao Lu ◽  
Carl Hopkins ◽  
Yuyuan Zhao ◽  
Gary Seiffert
Keyword(s):  
Absorption Coefficient ◽  
Pore Size ◽  
Sound Absorption ◽  
Single Layer ◽  
Normal Incidence ◽  
Sound Absorption Coefficient ◽  
Absorption Coefficients ◽  
Impedance Tube ◽  
Absorption Characteristics

AbstractThis paper investigates the sound absorption characteristics of porous steel samples manufactured by Lost Carbonate Sintering. Measurements of the normal incidence sound absorption coefficient were made using an impedance tube for single-layer porous steel discs and assemblies comprising four layers of porous steel discs. The sound absorption coefficient was found not to vary significantly with pore size in the range of 250-1500 μm. In general, the absorption coefficient increases with increasing frequency and increasing thickness, and peaks at specific frequencies depending on the porosity. An increase in porosity tends to increase the frequency at which the sound absorption coefficient reaches this peak. An advantage was found in using an assembly of samples with gradient porosities of 75%-70%-65%-60% as it gave higher and more uniform sound absorption coefficients than an assembly with porosities of 75%.

Normal‐incidence sound absorption measurement of a perforated panel using a sound‐intensity technique: Theoretical versus experimental

2000 ◽  
Vol 108 (5) ◽  
pp. 2513-2513
Author(s):  
Mohamad N. Dimon ◽  
Tharek A. Rahman ◽  
Ahmad K. Said ◽  
M. N. Ibrahim ◽  
M. Y. Jaafar
Keyword(s):  
Sound Absorption ◽  
Sound Intensity ◽  
Normal Incidence ◽  
Absorption Measurement

scholarly journals Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4474
Author(s):  
Katarina Monkova ◽  
Martin Vasina ◽  
Peter Pavol Monka ◽  
Drazan Kozak ◽  
Jan Vanca
Keyword(s):  
Sound Absorption ◽  
Negative Impact ◽  
Excitation Frequency ◽  
Volume Ratio ◽  
Acrylonitrile Butadiene Styrene ◽  
Normal Incidence ◽  
Absorption Properties ◽  
Absorption Performance ◽  
3D Printed ◽  
Material Volume

Noise has a negative impact on our environment and human health. For this reason, it is necessary to eliminate excessive noise levels. This paper is focused on the study of the sound absorption properties of materials with open-porous structures, which were made of acrylonitrile butadiene styrene (ABS) material using additive technology. Four types of structures (Cartesian, Octagonal, Rhomboid, and Starlit) were evaluated in this work, and every structure was prepared in three different volume ratios of the porosity and three different thicknesses. The sound absorption properties of the investigated ABS specimens were examined utilizing the normal incidence sound absorption and noise reduction coefficients, which were experimentally determined by the transfer function method using a two-microphone acoustic impedance tube. This work deals with various factors that influence the sound absorption performance of four different types of investigated ABS material’s structures. It was found, in this study, that the sound absorption performance of the investigated ABS specimens is strongly affected by different factors, specifically by the structure geometry, material volume ratio, excitation frequency of an acoustic wave, material’s thickness, and air space size behind the tested sound-absorbing materials.

An improved approach for normal-incidence sound transmission loss measurement using a four-microphone impedance tube

2020 ◽  
pp. 107754632092690
Author(s):  
Zechao Li ◽  
Sizhong Chen ◽  
Zhicheng Wu ◽  
Lin Yang
Keyword(s):  
Transfer Matrix ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Normal Incidence ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
The Common ◽  
Wavefield Decomposition ◽  
Insulation Performance

The main aim of this study is to introduce an improved method for determining the sound properties of acoustic materials which is more precise than the common wavefield decomposition method and simpler than the common transfer matrix method. In the first part of the article, a group of formulae for calculating sound transmission loss is represented by combining the wavefield decomposition and transfer matrix methods. Subsequently, a formula for calculating sound absorption coefficients is derived from these formulae by definition. Furthermore, the present formulae are validated by comparing the experimental results achieved with the present formulae and those results obtained by other methods recorded in published articles. Eventually, it is demonstrated that the method can accurately measure the sound insulation performance of materials and the sound absorption properties of limp and lightweight materials.

Sign in / Sign up

Export Citation Format

Share Document