scholarly journals Comparison of the Treatment Performances of High-strength Wastewater in Vertical Subsurface Flow Constructed Wetlands Planted with Acorus calamus and Lythrum salicaria

2009 ◽  
Vol 55 (5) ◽  
pp. 757-766 ◽  
Author(s):  
Yongjun Zhao ◽  
Bo Liu ◽  
Wenguang Zhang ◽  
Weijing Kong ◽  
Changwei Hu ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Subsurface Flow ◽  
High Strength ◽  
Lythrum Salicaria ◽  
Acorus Calamus ◽  
Subsurface Flow Constructed Wetlands

scholarly journals Phytoremediation performance of Acorus calamus and Canna indica for the treatment of primary treated domestic sewage through vertical subsurface flow constructed wetlands: a field-scale study

2020 ◽  
Vol 15 (2) ◽  
pp. 528-539 ◽  
Author(s):  
Mahesh Prasad Barya ◽  
Deepak Gupta ◽  
Tarun Kumar Thakur ◽  
Reetika Shukla ◽  
Gurudatta Singh ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Total Nitrogen ◽  
Subsurface Flow ◽  
Domestic Sewage ◽  
Acorus Calamus ◽  
Canna Indica ◽  
Environmentally Sustainable ◽  
Treated Sewage ◽  
Subsurface Flow Constructed Wetlands ◽  
Flow Treatment

Abstract Under the present investigation, vertical subsurface flow constructed wetlands (VSSFCWs) planted with macrophytes treated domestic sewage in an environmentally sustainable manner. Treatment of domestic sewage with wetlands is an alternative method that decreases energy consumption and economic costs involved in the treatment of environmental contaminants. This study evaluates the potential efficiency of VSSFCWs using two different macrophytes, Acorus calamus and Canna indica for the treatment of domestic sewage. To perform this study, two chambers of VSSFCWs of dimensions 2.48 m × 1.24 m × 1.54 m were built. The wetland was fed with the primary treated sewage at a hydraulic loading rate (HLR) of 0.67 m3/h (hours) in a batch flow. Treatment of primary sewage was observed from day 1 to day 6; once a day (i.e. 24 h to 144 h). The treatment of sewage was found to be significant up to day 6 (144 h); beyond this time, no significant removal was observed. The results revealed that both the wetland setups performed significant removal of TDS, BOD5, total nitrogen, and phosphate. The wetland planted with Canna indica was a better performer for the removal of TDS (22.31%), BOD5 (81.79%), total nitrogen (60.37%), and phosphate (80%).

Reciprocating constructed wetlands for treating industrial, municipal and agricultural wastewater

2001 ◽  
Vol 44 (11-12) ◽  
pp. 399-405 ◽  
Author(s):  
L. Behrends ◽  
L. Houke ◽  
E. Bailey ◽  
P. Jansen ◽  
D. Brown
Keyword(s):  
Wastewater Treatment ◽  
Constructed Wetlands ◽  
Environmental Protection Agency ◽  
Subsurface Flow ◽  
Domestic Wastewater ◽  
High Strength ◽  
Time Frequency ◽  
Operating Technique ◽  
Tennessee Valley ◽  
Subsurface Flow Constructed Wetlands

Scientists at the Tennessee Valley Authority (TVA), and in collaboration with the U.S. Environmental Protection Agency (EPA), are continuing to develop and refine an innovative wastewater treatment system referred to as reciprocating subsurface-flow constructed wetlands. Reciprocation relates to patented improvements in the design and operation of paired subsurface-flow constructed wetlands, such that contiguous cells are filled and drained on a frequent and recurrent basis. This operating technique turns the entire wetland system into a fixed-film biological reactor, in which it is possible to control redox potential in alternating aerobic and anaerobic zones. Reciprocating systems enable manipulation of wastewater treatment functions by controlling such parameters as hydraulic retention time, frequency of reciprocation, reciprocation cycle time, depth of reciprocation, and size and composition of substrate. These improved wetland technologies have been used for treating municipal/domestic wastewater, high strength animal wastewater, and mixed wastewater streams containing acids, recalcitrant compounds, solvents, antifreeze compounds, heavy metals, explosives, and fertilizer nutrients. Results from selected treatability studies and field demonstrations will be summarized with respect to conceptual design and treatment efficacy.

ENERGY PRODUCTION FROM WASTEWATER USING HORIZONTAL AND VERTICAL SUBSURFACE FLOW CONSTRUCTED WETLANDS

2014 ◽  
Vol 13 (10) ◽  
pp. 2517-2523 ◽  
Author(s):  
Jose Villasenor Camacho ◽  
Maria del Carmen Montano Vico ◽  
Manuel Andres ◽  
Rodrigo Rodrigo ◽  
Francisco Jesus Fernandez Morales ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Energy Production ◽  
Subsurface Flow ◽  
Subsurface Flow Constructed Wetlands

Field-Scale Studies of Subsurface Flow Constructed Wetlands for Stormwater Quality Enhancement

1997 ◽  
Vol 32 (1) ◽  
pp. 101-118 ◽  
Author(s):  
Q.J. ROCHFORT ◽  
W.E. Watt ◽  
J. Marsalek ◽  
B.C. Anderson ◽  
A.A. Crowder
Keyword(s):  
Organic Carbon ◽  
Constructed Wetlands ◽  
Suspended Solids ◽  
Nutrient Loading ◽  
Subsurface Flow ◽  
Reaction Rates ◽  
Pollutant Removal ◽  
Order Kinetic ◽  
Dissolved Metals ◽  
Subsurface Flow Constructed Wetlands

Abstract Two subsurface flow constructed wetlands were tested for pollutant removal performance in conjunction with an on-line stormwater detention pond, in Kingston Township, Ontario. The 4.9 m2 wetland cells were filled with 9 mm limestone gravel, and planted with cattail, common reed and spike rush. Changes in nutrient (total organic carbon, PO43- and NH4+), suspended solids and metal (Cu, Pb, Zn) concentrations were used to assess performance. Contaminant removal occurred through a combination of physical, chemical and biological means. As with any biological system, variation in performance of stormwater wetlands can be expected to occur as a result of fluctuations in contaminant loading, contact time and ambient environmental conditions. Storm pond effluent was delivered in continuous flow through the wetlands (during baseflow and event conditions), with a detention time of 1 to 3 days. The wetlands were able to maintain removal rates of up to 39% for orthophosphate even during the more severe conditions of fall dieback. Average removal of suspended solids (46%) and dissolved metals (Cu 50%) remained similar throughout all tests. Organic carbon was reduced by less than 10% during these tests. Low nutrient levels in the pond effluent were supplemented by spiking with sources of carbon, nitrogen and phosphorus during pulsed loading conditions. Daily sampling produced a time series, which illustrated the rates of decline in concentration of nutrients. First order kinetic assimilation rates ranged from 1.7 d-1 for NH4002B to 0.12 d-1 for organic carbon, which were noticeably lower when compared with municipal and industrial wastewater treatment rates. Three methods of sizing stormwater wetlands (impervious surface area, volumetric load and kinetic reaction rates) were compared using the same design storm and data from this study. From this comparison it was seen that the kinetic sizing approach proved to be the most versatile, and allowed for adaptation to northern climatic conditions and anticipated nutrient loading.

Enhancement of nitrogen removal in subsurface flow constructed wetlands employing a 2-stage configuration, an unsaturated zone, and recirculation

1995 ◽  
Vol 32 (3) ◽  
pp. 59-67 ◽  
Author(s):  
Kevin D. White
Keyword(s):  
Constructed Wetlands ◽  
Nitrogen Removal ◽  
Constructed Wetland ◽  
Subsurface Flow ◽  
Great Promise ◽  
Effluent Recirculation ◽  
Wetland Treatment ◽  
Subsurface Flow Constructed Wetlands ◽  
Inlet Zone ◽  
Bod Removal

Constructed wetland technology is currently evolving into an acceptable, economically competitive alternative for many wastewater treatment applications. Although showing great promise for removing carbonaceous materials from wastewater, wetland systems have not been as successful at nitrification. This is primarily due to oxygen limitations. Nitrification does occur in conventional wetland treatment systems, but typically requires long hydraulic retention times. This paper describes a study that first evaluated the capability of subsurface flow constructed wetlands to treat a high strength seafood processor wastewater and then evaluated passive aeration configurations and effluent recirculation with respect to nitrogen treatment efficiency. The first stage of a 2-stage wetland treatment system exhibited a relatively short hydraulic retention time and was designed for BOD removal only. The second stage wetland employed an unsaturated inlet zone and effluent recirculation to enhance nitrification. Results indicate that organic loading, and thus BOD removal, in the first stage wetland is key to optimal nitrification. Passive aeration through an unsaturated inlet zone and recirculation achieved up to 65-70 per cent ammonia nitrogen removal at hydraulic retention times of about 3.5 days. Inlet zone configuration and effluent recirculation is shown to enhance the nitrogen removal capability of constructed wetland treatment systems.

scholarly journals Difficulties and modifications in the use of available methods for hydraulic conductivity measurements in highly clogged horizontal subsurface flow constructed wetlands

2017 ◽  
Vol 76 (7) ◽  
pp. 1666-1675 ◽  
Author(s):  
Mateus Pimentel Matos ◽  
André Baxter Barreto ◽  
Gabriel Rodrigues Vasconcellos ◽  
Antonio Teixeira Matos ◽  
Gustavo Ferreira Simões ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Constructed Wetlands ◽  
Subsurface Flow ◽  
The Other ◽  
Good Representation ◽  
Horizontal Distance ◽  
Conductivity Measurements ◽  
Construction Time ◽  
Horizontal Subsurface Flow ◽  
Subsurface Flow Constructed Wetlands

Despite the fact that several authors consider the available measurement methods of hydraulic conductivity (ks) suitable for a good representation of the bed condition and clogging potential in horizontal subsurface flow constructed wetlands, others have questioned their adequacy. In this work, hydraulic conductivity measurements with conventional and modified methods were undertaken in two small full-scale units, one planted with cattail (Typha latifolia) and the other unplanted. Both units had already been operating for seven years and showed a high degree of clogging. It was observed that the use of the falling head method, with the introduction of the tubes during the test, provided results without a clear spatial trend. On the other hand, tests done on monitoring wells inserted during construction time showed, as expected, ks increasing with the horizontal distance from the inlet, but without reflecting actual field conditions. It was observed that, as the bed became more clogged, the use of the reported methods became more complex, suggesting the need of other methodologies. The use of planted fixed reactors (removable baskets installed in the bed) with evaluation of ks at constant head in the laboratory showed potential for the characterization of the hydrodynamic properties of the porous medium.

Sign in / Sign up

Export Citation Format

Share Document