Fluorescence Spectra of 1-Naphthol During the Sol-Gel Process of a Mixed Aluminum-Silicon Alkoxide (Si : Al = 94 : 6)

1992 ◽  
Vol 65 (3) ◽  
pp. 720-727 ◽  
Author(s):  
Tsuneo Fujii ◽  
Toshiaki Mabuchi ◽  
Hiroshi Kitamura ◽  
Osamu Kawauchi ◽  
Nobuaki Negishi ◽  
...  
Keyword(s):  
Fluorescence Spectra ◽  
Sol Gel ◽  
Silicon Alkoxide ◽  
Sol Gel Process ◽  
Aluminum Silicon

Development of temporal spectroscopic properties for Xerogel matrices doped with Rhodamine 6G dye

Open Physics ◽  
2006 ◽  
Vol 4 (3) ◽  
Author(s):  
Abbas Al-Wattar ◽  
Baha Chiad ◽  
Wesam Twej ◽  
Sarmed Al-Awadi
Keyword(s):  
Fluorescence Spectra ◽  
Rhodamine 6G ◽  
Sol Gel ◽  
Blue Shift ◽  
Spectroscopic Properties ◽  
Dye Molecules ◽  
Absorption And Fluorescence Spectra ◽  
Silica Network ◽  
Sol Gel Process ◽  
Two Parameters

AbstractThe solid host of a laser dye modifies its spectroscopic properties with respect to its liquid host. During the Sol-Gel process the dye molecules suffer from changing their environment. Two parameters affect this matter, the change in the concentration due to the evaporation of the solvent (drying) and the caging of dye molecules inside the pores or attachment to the silica network. Rhodamine 6G absorption and fluorescence spectra with different concentrations, during Sol-Gel time processing, have been studied. Both, absorption and fluorescence spectra of the dye in the solid host, for different concentrations, show a blue-shift relative to its liquid phase.

Fiber Drawing from Silicon Alkoxide Solutions in the Sol–Gel Process

1987 ◽  
Vol 16 (9) ◽  
pp. 1763-1766 ◽  
Author(s):  
Sumio Sakka ◽  
Hiromitsu Kozuka
Keyword(s):  
Sol Gel ◽  
Fiber Drawing ◽  
Silicon Alkoxide ◽  
Sol Gel Process

An Ultrasonic Monitoring of the Sol-Gel Process in Silicon Alkoxide Solutions

1995 ◽  
Vol 34 (Part 1, No. 5B) ◽  
pp. 2575-2578
Author(s):  
Mami Matsukawa ◽  
Isao Nagai ◽  
Yuko Tanaka
Keyword(s):  
Sol Gel ◽  
Ultrasonic Monitoring ◽  
Silicon Alkoxide ◽  
Sol Gel Process

Phosphazene Backbones for Siloxanes and Organic Polymers

1999 ◽  
Vol 576 ◽  
Author(s):  
Guido Kickelbick ◽  
Peter J. Miller ◽  
Krzysztof Matyjaszewski
Keyword(s):  
Sol Gel ◽  
Building Blocks ◽  
Thermoplastic Elastomers ◽  
Chain Extension ◽  
Organic Polymers ◽  
Silicon Alkoxide ◽  
Dsc Measurements ◽  
Sol Gel Process ◽  
A Chain ◽  
Tga And Dsc

ABSTRACT2,2,4,4,6,6-Hexachlorocyclotriphosphazene was modified by nucleophilic substitution to obtain building blocks for organic polymers and siloxane networks. 2,2,4,4,6,6-Hexachlorocyclotriphosphazene was substituted with functional groups to enable atom transfer radical polymerization (ATRP) as well as silicon alkoxide as precursors for the sol-gel process. ATRP was carried out with methyl acrylate followed by a chain extension with iso-bornyl acrylate to obtain new thermoplastic elastomers. The sol-gel process was carried out with acid, base and fluoride catalysts and the resulting materials were compared by TGA and DSC measurements.

The crystallization of thin-film ceramics

1992 ◽  
Vol 50 (1) ◽  
pp. 338-339
Author(s):  
J.M. Schwartz ◽  
L.F. Francis ◽  
L.D. Schmidt ◽  
P.S. Schabes-Retchkiman
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Sol Gel ◽  
Processing Route ◽  
Small Areas ◽  
Ceramic Thin Films ◽  
Complex Shapes ◽  
Sol Gel Process ◽  
Ceramic Precursors ◽  
Crystalline Ceramic

Ceramic thin films and coatings are of interest for electrical, optical, magnetic and thermal barrier applications. Critical for improved properties in thin films is the development of specific microstructures during processing. To this end, the sol-gel method is advantageous as a versatile processing route. The sol-gel process involves depositing a solution containing metalorganic or colloidal ceramic precursors onto a substrate and heating the deposited layer to form a crystalline or non-crystalline ceramic coating. This route has several advantages, including the ability to create tailored microstructures and properties, to coat large or small areas, simple or complex shapes, and to more easily prepare multicomponent ceramics. Sol-gel derived coatings are amorphous in the as-deposited state and develop their crystalline structure and microstructure during heat-treatment. We are particularly interested in studying the amorphous to crystalline transformation, because many key features of the microstructure such as grain size and grain size distribution may be linked to this transformation.

Epitaxial Growth of Sr0.3Ba0.7Nb2O6 Thin Films Prepared by Sol-Gel Process

1999 ◽  
Vol 606 ◽  
Author(s):  
Keishi Nishio ◽  
Jirawat Thongrueng ◽  
Yuichi Watanabe ◽  
Toshio Tsuchiya
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Epitaxial Growth ◽  
Raw Materials ◽  
Substrate Surface ◽  
Sol Gel ◽  
Tungsten Bronze ◽  
Monomethyl Ether ◽  
Tetragonal Tungsten Bronze ◽  
Sol Gel Process

AbstructWe succeeded in the preparation of strontium-barium niobate (Sr0.3Ba0.7Nb2O6 : SBN30)that have a tetragonal tungsten bronze type structure thin films on SrTiO3 (100), STO, or La doped SrTiO3 (100), LSTO, single crystal substrates by a spin coating process. LSTO substrate can be used for electrode. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)5 as raw materials, and acetic acid and diethylene glycol monomethyl ether as solvents. The coating thin films were sintered at temperature from 700 to 1000°C for 10 min in air. It was confirmed that the thin films on STO substrate sintered above 700°C were in the epitaxial growth because the 16 diffraction spots were observed on the pole figure using (121) reflection. The <130> and <310> direction of the thin film on STO were oriented with the c-axis in parallel to the substrate surface. However, the diffraction spots of thin film on LSTO substrate sintered at 700°C were corresponds to the expected pattern for (110).

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

Halogenation of ORMOSIL: A Promising Rout for Tailoring Optical Absorptions

2003 ◽  
Vol 771 ◽  
Author(s):  
Amir Fardad ◽  
Wei Liang ◽  
Yadong Zhang ◽  
Bryson Case ◽  
Shibin Jiang ◽  
...  
Keyword(s):  
Process Parameters ◽  
Sol Gel ◽  
Fiber Amplifiers ◽  
Grignard Reaction ◽  
Coupling Loss ◽  
Beam Splitters ◽  
Silicon Technology ◽  
Sol Gel Process ◽  
Propagation Losses ◽  
Signal Intensities

AbstractFluorinated and photo-imageable precursors are synthesized through a Barbier-Grignard reaction for 1550-nm window. The precursors are used for the sol-gel process of integrated optic components for silica-on-silicon technology. Material compositions and process parameters are optimized to achieve internal absorptions >0.1 dB/cm and propagation losses of about 0.5 dB/cm at 1550 nm. Compact 1×16 Beam splitters are designed and fabricated which exhibit >0.3 dB power uniformity, >0.1 dB PDL and 1.5 dB coupling loss. By hybrid integration of the passive splitters and in-house fiber amplifiers, amplifying splitters are demonstrated at various signal intensities.

Sign in / Sign up

Export Citation Format

Share Document