scholarly journals Applicability of a New Adsorption Isotherm Equation and Adsorption Abilities of Commercial Chelating Resins for Single Metal Ions in Acidic Solution

1984 ◽  
Vol 57 (8) ◽  
pp. 2055-2059 ◽  
Author(s):  
Kohei Urano ◽  
Veerapan Chanyasak ◽  
Nobuhiko Fujii ◽  
Toshiaki Yukawa
Keyword(s):  
Adsorption Isotherm ◽  
Metal Ions ◽  
Acidic Solution ◽  
Isotherm Equation ◽  
Chelating Resins

Thermo-kinetic investigation of heavy metal ions adsorption onto lignin considering coupled adsorption–desorption mechanisms: Modeling and experimental validation

2018 ◽  
Vol 09 (02) ◽  
pp. 1850014
Author(s):  
Farnaz Seyedvakili ◽  
Mohammad Samipoorgiri
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Individual Characteristics ◽  
Adsorption And Desorption ◽  
Isotherm Equation ◽  
Proposed Model ◽  
Isotherm And Kinetic Models ◽  
The Individual ◽  
Adsorption Desorption

A coupled adsorption–desorption thermo-kinetic model is developed incorporating both adsorption and desorption reactions. A local pseudo-equilibrium condition at the interface of adsorbent and adsorbate bulk phases was used as isotherm equation which can even be applied for multi-pollutants scenarios. The developed model is then validated using collected experimental data of heavy metal ions (Pb, Cu, Cd, Zn, and Ni). Comparisons were made for a number of isotherm and kinetic models to examine the performance of the proposed model. The developed model revealed desirable accuracy and superiority over other models in predicting the adsorption behavior and can be used for other systems of concern. The model correlates the adsorption kinetic with an [Formula: see text] value of 0.9391 and desorption kinetic with an [Formula: see text] value of 0.9383. By application of the proposed model to any available adsorption datasets, the individual characteristics of adsorption and desorption can be determined.

THE SORPTION OF ACIDS BY WOOL

1949 ◽  
Vol 27b (12) ◽  
pp. 879-889 ◽  
Author(s):  
R. Donovan ◽  
P. Larose
Keyword(s):  
Hydrochloric Acid ◽  
Adsorption Isotherm ◽  
Sulphuric Acid ◽  
Sodium Sulphate ◽  
Langmuir Adsorption Isotherm ◽  
Langmuir Equation ◽  
Recent Application ◽  
Satisfactory Explanation ◽  
Isotherm Equation ◽  
Langmuir Adsorption

The amount of acid sorbed by wool from solutions of sulphuric acid of four different strengths (namely, 0.0505, 0.0339, 0.0182, and 0.0101 molar) and containing sodium sulphate in amounts varying up to 0.16 molar has been determined. It has been found that the presence of the salt has little effect on the quantity of acid sorbed within those limits. The results are analyzed in the light of the theory of Gilbert and Rideal but this theory fails to give a satisfactory explanation of the results obtained. It is possible, however, to explain the results of the authors' experiments on the basis of the recent application of the Donnan equilibrium by Peters and Speakman. The Langmuir adsorption isotherm equation has been applied to data on the absorption of hydrochloric acid and of sulphuric acid by wool. The data appear to fit the Langmuir equation and give, for the maximum combining capacity, values that agree well with those estimated in other ways.

Adsorption of Cu2+ Metal Ions on Dithizone-Immobilized Natural Bentonite

2020 ◽  
Vol 840 ◽  
pp. 64-70
Author(s):  
Dian Mira Fadela ◽  
Mudasir Mudasir ◽  
Adhitasari Suratman
Keyword(s):  
Adsorption Isotherm ◽  
Complex Formation ◽  
Metal Ions ◽  
Electrostatic Interaction ◽  
Metal Ion ◽  
Synthesis And Characterization ◽  
Optimum Conditions ◽  
Initial Concentration ◽  
Activated Bentonite

The research of adsorption of Cu2+ metal ion on dithizone-immobilized natural bentonite (DNB) had been carried out. The experiment was begun by the activation of natural bentonite with HCl 4 M and dithizone-immobilized on activated bentonite surface. This study included synthesis and characterization of dithizone-immobilized bentonite and its application in adsorption of Cu2+ metal ions. The type of interaction occurred in the adsorption was tested by sequential desorption. The result showed that dithizone successfully immobilized on activated natural bentonite (ANB). The optimum conditions for Cu2+ metal ions adsorption using dithizone-immobilized natural bentonite are at pH 5; 0.1 g mass of adsorbent, with interaction time 60 min, and the initial concentration of ion at 80 ppm. Kinetics and adsorption isotherm studies suggest that the capacity, of the dithizone-immobilized natural bentonite in adsorbing Cu2+ metal ion is significantly improved compared to activated natural bentonite. The adsorption of Cu2+ metal ions by activated natural bentonite was through several interactions dominated by electrostatic interaction (82%). Otherwise, the interaction of dithizone-immobilized natural bentonite with Cu2+ metal ions in the sequence were dominated by the mechanism of complex formation of (75%). The result shows that the immobilization of dithizone changes the type of electrostatic interaction into complex formation.

Chelating Resins and Their Applications in the Analysis of Trace Metal Ions

1999 ◽  
Vol 61 (2) ◽  
pp. 94-114 ◽  
Author(s):  
B.S. Garg ◽  
R.K. Sharma ◽  
N. Bhojak ◽  
S. Mittal
Keyword(s):  
Trace Metal ◽  
Metal Ions ◽  
Trace Metal Ions ◽  
Chelating Resins

Parameterization of the corrected Dubinin–Serpinsky adsorption isotherm equation

2005 ◽  
Vol 291 (2) ◽  
pp. 600-605 ◽  
Author(s):  
Sylwester Furmaniak ◽  
Artur P. Terzyk ◽  
Piotr A. Gauden ◽  
Gerhard Rychlicki
Keyword(s):  
Adsorption Isotherm ◽  
Isotherm Equation
Sign in / Sign up

Export Citation Format

Share Document