scholarly journals Studies of Ion Exchange Membranes. XXXI. The Hydrogen Peroxide Treatment of the Cation Exchange Membrane of Ferric Ion Form

1970 ◽  
Vol 43 (3) ◽  
pp. 595-597 ◽  
Author(s):  
Yukio Mizutani
Keyword(s):  
Hydrogen Peroxide ◽  
Ion Exchange ◽  
Cation Exchange ◽  
Cation Exchange Membrane ◽  
Ferric Ion ◽  
Ion Exchange Membranes ◽  
Hydrogen Peroxide Treatment ◽  
Exchange Membrane

scholarly journals Evaluation of Electrodialysis Desalination Performance of Novel Bioinspired and Conventional Ion Exchange Membranes with Sodium Chloride Feed Solutions

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 217
Author(s):  
AHM Golam Hyder ◽  
Brian A. Morales ◽  
Malynda A. Cappelle ◽  
Stephen J. Percival ◽  
Leo J. Small ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Cation Exchange ◽  
Current Density ◽  
Feed Solution ◽  
Laboratory Scale ◽  
Cation Exchange Membrane ◽  
Limiting Current ◽  
Ion Exchange Membranes ◽  
Experimental Apparatus ◽  
Exchange Membrane

Electrodialysis (ED) desalination performance of different conventional and laboratory-scale ion exchange membranes (IEMs) has been evaluated by many researchers, but most of these studies used their own sets of experimental parameters such as feed solution compositions and concentrations, superficial velocities of the process streams (diluate, concentrate, and electrode rinse), applied electrical voltages, and types of IEMs. Thus, direct comparison of ED desalination performance of different IEMs is virtually impossible. While the use of different conventional IEMs in ED has been reported, the use of bioinspired ion exchange membrane has not been reported yet. The goal of this study was to evaluate the ED desalination performance differences between novel laboratory‑scale bioinspired IEM and conventional IEMs by determining (i) limiting current density, (ii) current density, (iii) current efficiency, (iv) salinity reduction in diluate stream, (v) normalized specific energy consumption, and (vi) water flux by osmosis as a function of (a) initial concentration of NaCl feed solution (diluate and concentrate streams), (b) superficial velocity of feed solution, and (c) applied stack voltage per cell-pair of membranes. A laboratory‑scale single stage batch-recycle electrodialysis experimental apparatus was assembled with five cell‑pairs of IEMs with an active cross-sectional area of 7.84 cm2. In this study, seven combinations of IEMs (commercial and laboratory-made) were compared: (i) Neosepta AMX/CMX, (ii) PCA PCSA/PCSK, (iii) Fujifilm Type 1 AEM/CEM, (iv) SUEZ AR204SZRA/CR67HMR, (v) Ralex AMH-PES/CMH-PES, (vi) Neosepta AMX/Bare Polycarbonate membrane (Polycarb), and (vii) Neosepta AMX/Sandia novel bioinspired cation exchange membrane (SandiaCEM). ED desalination performance with the Sandia novel bioinspired cation exchange membrane (SandiaCEM) was found to be competitive with commercial Neosepta CMX cation exchange membrane.

scholarly journals Custom-Made Ion Exchange Membranes at Laboratory Scale for Reverse Electrodialysis

Membranes ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 145 ◽  
Author(s):  
Liliana Villafaña-López ◽  
Daniel M. Reyes-Valadez ◽  
Oscar A. González-Vargas ◽  
Victor A. Suárez-Toriello ◽  
Jesús S. Jaime-Ferrer
Keyword(s):  
Ion Exchange ◽  
Cation Exchange ◽  
Anion Exchange ◽  
Structural Modification ◽  
Anion Exchange Membrane ◽  
Laboratory Scale ◽  
Cation Exchange Membrane ◽  
Ion Exchange Membranes ◽  
Reverse Electrodialysis ◽  
Exchange Membrane

Salinity gradient power is a renewable, non-intermittent, and neutral carbon energy source. Reverse electrodialysis is one of the most efficient and mature techniques that can harvest this energy from natural estuaries produced by the mixture of seawater and river water. For this, the development of cheap and suitable ion-exchange membranes is crucial for a harvest profitability energy from salinity gradients. In this work, both anion-exchange membrane and cation-exchange membrane based on poly(epichlorohydrin) and polyvinyl chloride, respectively, were synthesized at a laboratory scale (255 c m 2) by way of a solvent evaporation technique. Anion-exchange membrane was surface modified with poly(ethylenimine) and glutaraldehyde, while cellulose acetate was used for the cation exchange membrane structural modification. Modified cation-exchange membrane showed an increase in surface hydrophilicity, ion transportation and permselectivity. Structural modification on the cation-exchange membrane was evidenced by scanning electron microscopy. For the modified anion exchange membrane, a decrease in swelling degree and an increase in both the ion exchange capacity and the fixed charge density suggests an improved performance over the unmodified membrane. Finally, the results obtained in both modified membranes suggest that an enhanced performance in blue energy generation can be expected from these membranes using the reverse electrodialysis technique.

scholarly journals Thin Reinforced Ion-Exchange Membranes Containing Fluorine Moiety for All-Vanadium Redox Flow Battery

Membranes ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 867
Author(s):  
Ha-Neul Moon ◽  
Hyeon-Bee Song ◽  
Moon-Sung Kang
Keyword(s):  
Ion Exchange ◽  
Cation Exchange ◽  
Electrical Resistance ◽  
Vanadium Redox Flow Battery ◽  
Ion Exchange Membranes ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Exchange Membrane ◽  
Vanadium Redox ◽  
Charge Discharge

In this work, we developed pore-filled ion-exchange membranes (PFIEMs) fabricated for the application to an all-vanadium redox flow battery (VRFB) by filling a hydrocarbon-based ionomer containing a fluorine moiety into the pores of a porous polyethylene (PE) substrate having excellent physical and chemical stabilities. The prepared PFIEMs were shown to possess superior tensile strength (i.e., 136.6 MPa for anion-exchange membrane; 129.9 MPa for cation-exchange membrane) and lower electrical resistance compared with commercial membranes by employing a thin porous PE substrate as a reinforcing material. In addition, by introducing a fluorine moiety into the filling ionomer along with the use of the porous PE substrate, the oxidation stability of the PFIEMs could be greatly improved, and the permeability of vanadium ions could also be significantly reduced. As a result of the evaluation of the charge–discharge performance in the VRFB, it was revealed that the higher the fluorine content in the PFIEMs was, the higher the current efficiency was. Moreover, the voltage efficiency of the PFIEMs was shown to be higher than those of the commercial membranes due to the lower electrical resistance. Consequently, both of the pore-filled anion- and cation-exchange membranes showed superior charge–discharge performances in the VRFB compared with those of hydrocarbon-based commercial membranes.

scholarly journals Facile synthesis and properties of a cation exchange membrane with bifunctional groups prepared by pre-irradiation graft copolymerization

RSC Advances ◽  
2018 ◽  
Vol 8 (46) ◽  
pp. 25966-25973 ◽  
Author(s):  
Jianhua Zu ◽  
Fangdong Tang ◽  
Linfeng He ◽  
Lingxiao Fu
Keyword(s):  
Ion Exchange ◽  
Cation Exchange ◽  
Graft Copolymerization ◽  
Low Cost ◽  
Cation Exchange Membrane ◽  
Ion Exchange Membrane ◽  
Facile Synthesis ◽  
Exchange Membrane ◽  
Irradiation Graft

Low-cost and anti-degradation ion-exchange membrane named ETFE-g-poly(AA-co-SSS) with bifunctional groups prepared by the pre-irradiation grafting method.

Sign in / Sign up

Export Citation Format

Share Document