scholarly journals Connective Tissue Mechanics of Metridium Senile

1971 ◽  
Vol 55 (3) ◽  
pp. 775-795
Author(s):  
JOHN M. GOSLINE
Keyword(s):  
Mechanical Properties ◽  
Electrostatic Interactions ◽  
Amorphous Polymer ◽  
Polymer Network ◽  
Inorganic Ions ◽  
Tissue Mechanics ◽  
Polymer Chains ◽  
Metridium Senile ◽  
The Matrix ◽  
Elastic Mechanism

1. The mechanical properties of the mesogloea of the sea anemone Metridium senile were investigated. An amorphous polymer network in the matrix was found to play a major role in determining the mechanical properties of the tissue. 2. The matrix network provides an elastic mechanism based on ‘rubber elasticity’ of the folded matrix molecules. The properties of the matrix network alone account for the extensibility and elasticity of mesogloea. 3. The collagen acts as a reinforcing filler providing short-term rigidity to the flimsy polymer network. 4. The collagen fibres are not directly cross-linked to one another but are tied together through the amorphous matrix. 5. The extensibility and elasticity of the tissue appear to be dependent on a very low degree of cross-linking in the mesogloeal system. Inorganic ions mask ionized groups on the collagen and matrix polymer chains and block electrostatic interactions which could cross-link the system.

scholarly journals Side Chains and the Insufficient Lubrication of Water in Polyacrylamide Hydrogel—A New Insight

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1845 ◽  
Author(s):  
Lei ◽  
Zhou ◽  
Liu
Keyword(s):  
Mechanical Properties ◽  
Volume Fraction ◽  
Polymer Network ◽  
Polymer Chains ◽  
Side Chain ◽  
Side Chains ◽  
Polyacrylamide Hydrogels ◽  
Young’S Moduli ◽  
Property Changes ◽  
Dynamics Simulations

Existing theories cannot predict the mechanical property changes of polyacrylamide hydrogels with different water content because of the absence of side chains. In this study, polyacrylamide hydrogels are prepared and tested to investigate the side chain effect on their mechanical properties. First, the comparison between the effective chain density and total chain density provides proof of the large amount of side chains in the polymer network of PAAm hydrogel. We propose a practical chain density fraction to measure the side chain fraction. Then, the abnormal Young’s moduli-polymer volume fraction relationship reveals that side chains affect the mechanical properties of hydrogel through the insufficient lubrication of water. Water confined in narrow space within a molecular-level size can bear shear force to provide extra deformation resistance. A constitutive mode considering the effect of the insufficient lubrication of water is proposed. Combining this constitutive model with experimental results, we find that this insufficient lubrication of water exists even in equilibrium PAAm hydrogel. Molecular dynamics simulations reveal that this insufficient lubrication of water comes from the constraint of polymer chains. It also demonstrates that when there is insufficient lubrication, the rearrangement of water molecules leads to the persistent energy dissipation in the Mullins effect of PAAm hydrogel.

Epoxy/polyurethane nanocomposite coatings for anti-erosion/wear applications: A review

2020 ◽  
Vol 54 (22) ◽  
pp. 3189-3203 ◽  
Author(s):  
Hamed Bahramnia ◽  
Hamidreza Mohammadian Semnani ◽  
Ali Habibolahzadeh ◽  
Hassan Abdoos
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Composite Coatings ◽  
High Strength ◽  
Polymer Chains ◽  
Erosion Wear ◽  
Nano Composite ◽  
Offshore Pipelines ◽  
The Matrix ◽  
Coating Characteristics

Offshore pipelines are vulnerable against erosion/wear deterioration mechanisms that can be controlled through the use of proper surface coatings, such as polymer matrix nano-composite (PMNC) coatings that are well-known for their ease of production, availability and applicability. Epoxy, as a versatile rigid and brittle resin and polyurethane with proper chemical/mechanical properties, are potential candidates to make the matrix of these composites. A combination of these polymers can also enhance the mechanical behaviors, glass transition temperature and flexibility. In addition, the desired coating characteristics, such as adhesion to metal substrate, mechanical properties, erosion/wear resistivity and UV absorbance, can be further improved through the addition of appropriate nanoparticles within the polymer matrix. Especially, nanoparticles can improve the erosion/wear resistance of polymers because of establishing high strength bonds between the polymer chains and the reinforcements besides enhancing other required properties. The present work is a review on PMNC coatings that contain epoxy, polyurethane or EP/polyurethane as a polymer matrix along with the details of the nanoparticle reinforcements, such as alumina, silica, titanium oxide, zinc oxide, clay and carbon-based materials. The effect of these nanoparticles on the properties of composite coatings has also been investigated.

Morphology and Mechanical Properties of Polyethylene Terephthalate/Ethylene Propylene Diene Monomer (PET/EPDM) in the Presence of Nanoclay

2020 ◽  
Vol 57 (3) ◽  
pp. 249-259
Author(s):  
Baifen Liu ◽  
Mohammad Mirjalili ◽  
Peiman Valipour ◽  
Sajad Porzal ◽  
shirin Nourbakhsh
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Thermal Destruction ◽  
Processing Temperature ◽  
Tem Analysis ◽  
Maximum Stiffness ◽  
Cloisite 30B ◽  
Nano Clay ◽  
The Matrix ◽  
Sample Maximum

This research deals with the mechanical properties, microstructure, and interrelations of triple nanocomposite based on PET/EPDM/Nanoclay. These properties were examined in different percentages of PET/EPDM blend with compatibilizer (Styrene-Ethylene/Butylene-Styrene)-G-(Maleic anhydrate) (SEBS-g-MAH). Results showed that the addition of 15% SEBS-g-MAH improved the toughness and impact strength of this nanocomposite. SEM micrographs indicated the most stable fuzzy microstructure in a 50/50 mixture of scattered phases of EPDM/SEBS-g-MAH. The effects of percentages of 1, 3, 5, 7 nanoclay Cloisite 30B (C30B) on the improvement of the properties were evaluated. With the addition of nano clay, the toughness and impact strength was reduced. Thermal destruction of nanoclay in processing temperature led to the decreasing dispersion of clay plates in the matrix and a reduction in the distances of nano clay plates in the composite compared to pure nano clay. XRD and TEM analysis was used to demonstrate the results. By adding 1% of nanoclay to the optimal sample, maximum stiffness, and Impact strength, among other nanocomposites, was achieved.

Elastomer nanocomposites based on NBR/BR/nanoclay: morphology and mechanical properties

2013 ◽  
Vol 33 (2) ◽  
pp. 133-139 ◽  
Author(s):  
Shohreh Tolooei ◽  
Ghasem Naderi ◽  
Shirin Shokoohi ◽  
Sedigheh Soltani
Keyword(s):  
Mechanical Properties ◽  
Polymer Chains ◽  
Butadiene Rubber ◽  
Cure Characteristics ◽  
Fluid Uptake ◽  
Roll Mill ◽  
Dispersion State ◽  
Cure Time ◽  
Diffraction Patterns ◽  
Nanoclay Content

Abstract Ternary elastomer nanocomposites based on acrylonitrile butadiene rubber (NBR), polybutadiene rubber (BR) and two types of nanoclay (Cloisite 15A and Cloisite 30B) were prepared using a laboratory scale two-roll mill. The effects of nanoclay composition on the cure characteristics, mechanical properties and morphology of NBR/BR (50/50) nanocomposite samples containing 3, 5, 7 and 10 wt% nanoclay were investigated. According to the cure characteristics both types of nanoclay caused a reduction in the scorch time and optimum cure time of the nanocomposite compound. X-ray diffraction patterns of all samples suggested the intercalation of polymer chains into the silicate layers. This was confirmed by transmission electron microscopy (TEM) micrographs. Dynamic mechanical thermal analysis (DMTA) was utilized to study the dispersion state of nanoclay within the elastomer blend matrix. The results showed the development of mechanical properties with the establishment of interactions between nanoclay and polymer chains. Antiknock and brake fluid uptake were also reduced with increasing the nanoclay content.

scholarly journals Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1124
Author(s):  
Zhifang Liang ◽  
Hongwu Wu ◽  
Ruipu Liu ◽  
Caiquan Wu
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Mechanical Performance ◽  
Tensile Elongation ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Impact Performance ◽  
The Matrix ◽  
Blending Process ◽  
Extension Direction

Green biodegradable plastics have come into focus as an alternative to restricted plastic products. In this paper, continuous long sisal fiber (SF)/polylactic acid (PLA) premixes were prepared by an extrusion-rolling blending process, and then unidirectional continuous long sisal fiber-reinforced PLA composites (LSFCs) were prepared by compression molding to explore the effect of long fiber on the mechanical properties of sisal fiber-reinforced composites. As a comparison, random short sisal fiber-reinforced PLA composites (SSFCs) were prepared by open milling and molding. The experimental results show that continuous long sisal fiber/PLA premixes could be successfully obtained from this pre-blending process. It was found that the presence of long sisal fibers could greatly improve the tensile strength of LSFC material along the fiber extension direction and slightly increase its tensile elongation. Continuous long fibers in LSFCs could greatly participate in supporting the load applied to the composite material. However, when comparing the mechanical properties of the two composite materials, the poor compatibility between the fiber and the matrix made fiber’s reinforcement effect not well reflected in SSFCs. Similarly, the flexural performance and impact performance of LSFCs had been improved considerably versus SSFCs.

A poly(arylene ether sulfone) hybrid membrane using titanium dioxide nanoparticles as the filler

2016 ◽  
Vol 29 (1) ◽  
pp. 26-35 ◽  
Author(s):  
Yunwu Yu ◽  
Wenhao Pan ◽  
Xiaoman Guo ◽  
Lili Gao ◽  
Yaxin Gu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Titanium Dioxide ◽  
Gas Separation ◽  
Proton Nuclear Magnetic Resonance ◽  
Separation Performance ◽  
Hydroxyl Groups ◽  
Hybrid Membranes ◽  
Permeability Coefficients ◽  
Arylene Ether ◽  
The Matrix

Poly(arylene ether sulfone) (PES)–titanium dioxide (TiO2) hybrid membranes were prepared via solution blending method using TiO2 nanoparticles as inorganic filler. The chemical structure and thermal stability of the matrix polymer were characterized by proton nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermogravimetric analysis. The crystal structure, morphology, mechanical properties, and gas separation performance of hybrid membranes were characterized in detail. As shown in scanning electron microscopic images, TiO2 nanoparticles dispersed homogeneously in the matrix. Although the mechanical properties of hybrid membranes decreased certainly compared to the pure PES membranes, they are strong enough for gas separation in this study. All gas permeability coefficients of PES-TiO2 hybrid membranes were higher than pure PES membranes, attributed to the nanogap caused by TiO2 nanoparticles, for instance, oxygen and nitrogen permeability coefficients of Hybrid-3 (consists of PES with 4-amino-phenyl pendant group and hexafluoroisopropyl (Am-PES)-20 and TiO2 nanoparticles, 5 wt%) increased from 2.57 and 0.33 to 5.88 and 0.63, respectively. In addition, the separation factor increased at the same time attributed to the stimulative transfer effect caused by the interaction of hydroxyl groups on the TiO2 nanoparticle and polar carbon dioxide molecules.

scholarly journals Macroporous chitosan/methoxypoly(ethylene glycol) based cryosponges with unique morphology for tissue engineering applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Pradeep Kumar ◽  
Viness Pillay ◽  
Yahya E. Choonara
Keyword(s):  
Tissue Engineering ◽  
Polymer Network ◽  
Three Dimensional ◽  
Hysteresis Loops ◽  
Interpenetrating Polymer Network ◽  
Morphological Data ◽  
Porous Scaffolds ◽  
Morphological Variations ◽  
Molecular Stability ◽  
The Matrix

AbstractThree-dimensional porous scaffolds are widely employed in tissue engineering and regenerative medicine for their ability to carry bioactives and cells; and for their platform properties to allow for bridging-the-gap within an injured tissue. This study describes the effect of various methoxypolyethylene glycol (mPEG) derivatives (mPEG (-OCH3 functionality), mPEG-aldehyde (mPEG-CHO) and mPEG-acetic acid (mPEG-COOH)) on the morphology and physical properties of chemically crosslinked, semi-interpenetrating polymer network (IPN), chitosan (CHT)/mPEG blend cryosponges. Physicochemical and molecular characterization revealed that the –CHO and –COOH functional groups in mPEG derivatives interacted with the –NH2 functionality of the chitosan chain. The distinguishing feature of the cryosponges was their unique morphological features such as fringe thread-, pebble-, curved quartz crystal-, crystal flower-; and canyon-like structures. The morphological data was well corroborated by the image processing data and physisorption curves corresponding to Type II isotherm with open hysteresis loops. Functionalization of mPEG had no evident influence on the macro-mechanical properties of the cryosponges but increased the matrix strength as determined by the rheomechanical analyses. The cryosponges were able to deliver bioactives (dexamethasone and curcumin) over 10 days, showed varied matrix degradation profiles, and supported neuronal cells on the matrix surface. In addition, in silico simulations confirmed the compatibility and molecular stability of the CHT/mPEG blend compositions. In conclusion, the study confirmed that significant morphological variations may be induced by minimal functionalization and crosslinking of biomaterials.

scholarly journals Influence of Alumina Nanofibers Sintered by the Spark Plasma Method on Nickel Mechanical Properties

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 548 ◽  
Author(s):  
Leonid Agureev ◽  
Valeriy Kostikov ◽  
Zhanna Eremeeva ◽  
Svetlana Savushkina ◽  
Boris Ivanov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Strength Properties ◽  
Alumina Nanoparticles ◽  
Metal Powders ◽  
Wide Range ◽  
The Matrix ◽  
Spark Plasma ◽  
Average Size

The article presents the study of alumina nanoparticles’ (nanofibers) concentration effect on the strength properties of pure nickel. The samples were obtained by spark plasma sintering of previously mechanically activated metal powders. The dependence of the grain size and the relative density of compacts on the number of nanofibers was investigated. It was found that with an increase in the concentration of nanofibers, the average size of the matrix particles decreased. The effects of the nanoparticle concentration (0.01–0.1 wt.%) on the elastic modulus and tensile strength were determined for materials at 25 °C, 400 °C, and 750 °C. It was shown that with an increase in the concentration of nanofibers, a 10–40% increase in the elastic modulus and ultimate tensile strength occurred. A comparison of the mechanical properties of nickel in a wide range of temperatures, obtained in this work with materials made by various technologies, is carried out. A description of nanofibers’ mechanisms of influence on the structure and mechanical properties of nickel is given. The possible impact of impurity phases on the properties of nickel is estimated. The tendency of changes in the mechanical properties of nickel, depending on the concentration of nanofibers, is shown.

Sign in / Sign up

Export Citation Format

Share Document