scholarly journals Cilia density and flow velocity affect alignment of motile cilia from brain cells

2020 ◽  
Vol 223 (24) ◽  
pp. jeb229310
Author(s):  
Nicola Pellicciotta ◽  
Debasish Das ◽  
Jurij Kotar ◽  
Marion Faucourt ◽  
Nathalie Spassky ◽  
...  

ABSTRACTIn many organs, thousands of microscopic ‘motile cilia’ beat in a coordinated fashion generating fluid flow. Physiologically, these flows are important in both development and homeostasis of ciliated tissues. Combining experiments and simulations, we studied how cilia from brain tissue align their beating direction. We subjected cilia to a broad range of shear stresses, similar to the fluid flow that cilia themselves generate, in a microfluidic setup. In contrast to previous studies, we found that cilia from mouse ependyma respond and align to these physiological shear stress at all maturation stages. Cilia align more easily earlier in maturation, and we correlated this property with the increase in multiciliated cell density during maturation. Our numerical simulations show that cilia in densely packed clusters are hydrodynamically screened from the external flow, in agreement with our experimental observation. Cilia carpets create a hydrodynamic screening that reduces the susceptibility of individual cilia to external flows.

2020 ◽  
Vol 117 (15) ◽  
pp. 8315-8325 ◽  
Author(s):  
Nicola Pellicciotta ◽  
Evelyn Hamilton ◽  
Jurij Kotar ◽  
Marion Faucourt ◽  
Nathalie Delgehyr ◽  
...  

Motile cilia are widespread across the animal and plant kingdoms, displaying complex collective dynamics central to their physiology. Their coordination mechanism is not generally understood, with previous work mainly focusing on algae and protists. We study here the entrainment of cilia beat in multiciliated cells from brain ventricles. The response to controlled oscillatory external flows shows that flows at a similar frequency to the actively beating cilia can entrain cilia oscillations. We find that the hydrodynamic forces required for this entrainment strongly depend on the number of cilia per cell. Cells with few cilia (up to five) can be entrained at flows comparable to cilia-driven flows, in contrast with what was recently observed in Chlamydomonas. Experimental trends are quantitatively described by a model that accounts for hydrodynamic screening of packed cilia and the chemomechanical energy efficiency of the flagellar beat. Simulations of a minimal model of cilia interacting hydrodynamically show the same trends observed in cilia.


2017 ◽  
Vol 13 (4-2) ◽  
pp. 546-552 ◽  
Author(s):  
Hasan Basri ◽  
Jimmy Deswidawansyah Nasution ◽  
Ardiyansyah Syahrom ◽  
Mohd Ayub Sulong ◽  
Amir Putra Md. Saad ◽  
...  

This paper proposes an improved modeling approach for bone scaffolds biodegradation. In this study, the numerical analysis procedure and computer-based simulation were performed for the bone scaffolds with varying porosities in determining the wall shear stresses and the permeabilities along with their influences on the scaffolds biodegradation process while the bio-fluids flow through within followed with the change in the flow rates. Based on the experimental study by immersion testing from 0 to 72 hours of the time period, the specimens with different morphologies of the commercial bone scaffolds were collected into three groups samples of 30%, 41%, and 55% porosities. As the representative of the cancellous bone morphology, the morphological degradation was observed by using 3-D CAD scaffold models based on microcomputed tomography images. By applying the boundary conditions to the computational fluid dynamics (CFD) and the fluid-structure interaction (FSI) models, the wall shear stresses within the scaffolds due to fluid flow rates variation had been simulated and determined before and after degradation. The increase of fluid flow rates tends to raise the pressure drop for scaffold models with porosities lower than 50% before degradation. As the porosities increases, the pressure drop decreases with an increase in permeability within the scaffold. The flow rates have significant effects on scaffolds with higher pressure drops by introducing the wall shear stresses with the highest values and lower permeability. These findings indicate the importance of using accurate computational models to estimate shear stress and determine experimental conditions in perfusion bioreactors for tissue engineering more accurate results will be achieved to indicate the natural distributions of fluid flow velocity, wall shear stress, and pressure.


1997 ◽  
Vol 273 (4) ◽  
pp. E751-E758 ◽  
Author(s):  
R. Smalt ◽  
F. T. Mitchell ◽  
R. L. Howard ◽  
T. J. Chambers

The nature of the stimulus sensed by bone cells during mechanical usage has not yet been determined. Because nitric oxide (NO) and prostaglandin (PG) production appear to be essential early responses to mechanical stimulation in vivo, we used their production to compare the responsiveness of bone cells to strain and fluid flow in vitro. Cells were incubated on polystyrene film and subjected to unidirectional linear strains in the range 500–5,000 microstrain (με). We found no increase in NO or PGE2 production after loading of rat calvarial or long bone cells, MC3T3-E1, UMR-106–01, or ROS 17/2.8 cells. In contrast, exposure of osteoblastic cells to increased fluid flow induced both PGE2 and NO production. Production was rapidly induced by wall-shear stresses of 148 dyn/cm2 and was observed in all the osteoblastic populations used but not in rat skin fibroblasts. Fluid flow appeared to act through an increase in wall-shear stress. These data suggest that mechanical loading of bone is sensed by osteoblastic cells through fluid flow-mediated wall-shear stress rather than by mechanical strain.


2007 ◽  
Vol 30 (4) ◽  
pp. 90 ◽  
Author(s):  
Kenneth A. Myers ◽  
Jerome B. Rattner ◽  
Nigel G. Shrive ◽  
David A. Hart

Introduction: A limited understanding of the cellular mechanisms governing bone mechanotransduction has inhibited the development of clinical treatments for a variety of bone disorders, including osteoporosis, osteoarthritis and microgravity-associated bone atrophy. The cytoskeleton is thought to play a role in cellular mechanotransduction, however the exact mechanism in bone cells has not yet been clearly elucidated. Studies involving cytoskeletal inhibitors have not generally considered secondary effects on cellular organelles such as the primary cilia. These cellular projections could account for the disparity between shear stresses predicted to occur in vivo and the minimum threshold of membrane deformation required to elicit a cellular response in vitro. Methods: MG-63 (human osteoblast-like) cells were cultured in vitro. Cultures were exposed to intermittent cyclic fluid flow shear stress (1 Pa amplitude), for 8 or 12 hrs. Some cultures were loaded in the presence of nocodazole (a microtubule inhibitor) or cytochalasin D (an actin filament inhibitor). The cellular response was analyzed through RT-PCR assessment of messenger RNA levels for specific molecules related to matrix metabolism. The effects of drug treatments on cytoskeletal disorganization and the primary cilia were assessed with immunocytochemistry and electron microscopy. Results: In untreated cultures, shear stress was associated with significant increases in mRNA levels for collagen I and matrix metalloproteinases 1 and 3, for both time points assessed. These increases were maintained in cultures loaded in the presence of cytochalasin D, but were almost completely abrogated in nocodazole-treated cultures. Cytoskeletal inhibitors exerted some dose-dependent effects on length and structure of primary cilia in MG-63 cells. Conclusions: The microtubule network appears to be necessary for some shear-induced responses of osteoblast-like cells. MG-63 cells possess primary cilia, organelles that could amplify fluid flow shear, accounting for some apparent contradictions between studies related to osteoblast mechanosensitivity. Since these structures are composed of microtubules, the observation that microtubule disruptors inhibit the shear response of osteoblast-like cells suggests the primary cilium may have a role in osteoblast mechanotransduction. The effects of cytoskeletal inhibitors on cilium structure may explain the conflicting results of earlier mechanotransduction studies.


2009 ◽  
Vol 620 ◽  
pp. 31-41 ◽  
Author(s):  
MICHAEL B. MARTELL ◽  
J. BLAIR PEROT ◽  
JONATHAN P. ROTHSTEIN

Direct numerical simulations (DNSs) are used to investigate the drag-reducing performance of superhydrophobic surfaces (SHSs) in turbulent channel flow. SHSs combine surface roughness with hydrophobicity and can, in some cases, support a shear-free air–water interface. Slip velocities, wall shear stresses and Reynolds stresses are considered for a variety of SHS microfeature geometry configurations at a friction Reynolds number of Reτ ≈ 180. For the largest microfeature spacing studied, an average slip velocity over 75% of the bulk velocity is obtained, and the wall shear stress reduction is found to be nearly 40%. The simulation results suggest that the mean velocity profile near the superhydrophobic wall continues to scale with the wall shear stress but is offset by a slip velocity that increases with increasing microfeature spacing.


1993 ◽  
Vol 115 (1) ◽  
pp. 112-118 ◽  
Author(s):  
D. A. Steinman ◽  
Bach Vinh ◽  
C. Ross Ethier ◽  
M. Ojha ◽  
R. S. C. Cobbold ◽  
...  

In order to understand the possible role that hemodynamic factors may play in the pathogenesis of distal anastomotic intimal hyperplasia, we carried out numerical simulations of the flow field within a two-dimensional 45 degree rigid-walled end-to-side model anastomosis. The numerical code was tested and compared with experimental (photochromic dye tracer) studies using steady and near-sinusoidal waveforms, and agreement was generally very good. Using a normal human superficial femoral artery waveform, numerical simulations indicated elevated instantaneous wall shear stress magnitudes at the toe and heel of the graft-host junction and along the host artery bed. These sites also experienced highly variable wall shear stress behavior over the cardiac cycle, as well as elevated spatial gradients of wall shear stress. These observations provide additional evidence that intimal hyperplasia may be correlated to wall shear stresses over the cardiac cycle, high wall shear stress gradients, or a combination of the three. The limitations of the present work (especially in regard to the two-dimensional nature of the flow simulations) are discussed, and results are compared to previous observations about distal anastomotic intimal hyperplasia.


2001 ◽  
Vol 90 (5) ◽  
pp. 1849-1854 ◽  
Author(s):  
E. A. Nauman ◽  
R. L. Satcher ◽  
T. M. Keaveny ◽  
B. P. Halloran ◽  
D. D. Bikle

Although there is no consensus as to the precise nature of the mechanostimulatory signals imparted to the bone cells during remodeling, it has been postulated that deformation-induced fluid flow plays a role in the mechanotransduction pathway. In vitro, osteoblasts respond to fluid shear stress with an increase in PGE2production; however, the long-term effects of fluid shear stress on cell proliferation and differentiation have not been examined. The goal of this study was to apply continuous pulsatile fluid shear stresses to osteoblasts and determine whether the initial production of PGE2 is associated with long-term biochemical changes. The acute response of bone cells to a pulsatile fluid shear stress (0.6 ± 0.5 Pa, 3.0 Hz) was characterized by a transient fourfold increase in PGE2 production. After 7 days of static culture (0 dyn/cm2) or low (0.06 ± 0.05 Pa, 0.3 Hz) or high (0.6 ± 0.5 Pa, 3.0 Hz) levels of pulsatile fluid shear stress, the bone cells responded with an 83% average increase in cell number, but no statistical difference ( P > 0.53) between the groups was observed. Alkaline phosphatase activity per cell decreased in the static cultures but not in the low- or high-flow groups. Mineralization was also unaffected by the different levels of applied shear stress. Our results indicate that short-term changes in PGE2 levels caused by pulsatile fluid flow are not associated with long-term changes in proliferation or mineralization of bone cells.


1986 ◽  
Vol 14 (4) ◽  
pp. 264-291
Author(s):  
K. L. Oblizajek ◽  
A. G. Veith

Abstract Treadwear is explained by specific mechanical properties and actions of tires. Rubber shear stresses in the contact zone between the tire and the road become large at large slip angles. When normal stresses are insufficient to prevent sliding at the rear of the footprint, wear occurs at a rate that depends on test severity. Two experimental approaches are described to relate treadwear to tire characteristics. The first uses transducers imbedded in a simulated road surface to obtain direct measurements of contact stresses on the loaded, freely-rolling, steered tires. The second approach is developed with the aid of a simple carcass, tread-band, tread-rubber tire model. Various tire structural configurations; characterized by carcass spring rate, edgewise flexural band stiffness, and tread rubber shear stiffness; are simulated and lateral shear stress response in the contact zone is determined. Tires featuring high band stiffness and low carcass stiffness generate lower lateral shear stress levels. Furthermore, coupling of tread-rubber stiffness and band flexural rigidity are important in determining level of shear stresses. Laboratory measurements with the described apparatus produced values of tread-band bending and carcass lateral stiffness for several tire constructions. Good correlation is shown between treadwear and a broad range of tire stiffness and test course severities.


1992 ◽  
Vol 20 (2) ◽  
pp. 83-105 ◽  
Author(s):  
J. P. Jeusette ◽  
M. Theves

Abstract During vehicle braking and cornering, the tire's footprint region may see high normal contact pressures and in-plane shear stresses. The corresponding resultant forces and moments are transferred to the wheel. The optimal design of the tire bead area and the wheel requires a detailed knowledge of the contact pressure and shear stress distributions at the tire/rim interface. In this study, the forces and moments obtained from the simulation of a vehicle in stationary braking/cornering conditions are applied to a quasi-static braking/cornering tire finite element model. Detailed contact pressure and shear stress distributions at the tire/rim interface are computed for heavy braking and cornering maneuvers.


Sign in / Sign up

Export Citation Format

Share Document