Effect of high volume fly ash in ultra high performance concrete on compressive strength

2016 ◽  
pp. 463-466
Author(s):  
Norzaireen Azmee ◽  
Muhd Nuruddin
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Ultra High Performance Concrete ◽  
High Volume Fly Ash

scholarly journals Mix design of high-volume fly ash ultra high performance concrete

2021 ◽  
Vol 15 (4) ◽  
pp. 197-208
Author(s):  
Nguyen Van Tuan ◽  
Pham Sy Dong ◽  
Le Trung Thanh ◽  
Nguyen Cong Thang ◽  
Yang Keun Hyeok
Keyword(s):  
Heat Treatment ◽  
Compressive Strength ◽  
Fly Ash ◽  
Co2 Emissions ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Mix Design ◽  
Ultra High Performance Concrete ◽  
High Volume Fly Ash

The addition of supplementary cementitious materials (SCMs) to replace cement, especially with a high volume (> 50%), is an effective way to reduce the environmental impact due to the CO2 emissions generated in the production of ultra-high performance concrete (UHPC). Unfortunately, no official guidelines of UHPC using a high volume of SCMs have been published up to now. This paper proposes a new method of mix design for UHPC using high volume fly ash (HVFA), that is referred to the particle packing optimization of the Compressive Packing Model proposed by F. de Larrard. This proposed method also considers the heat treatment curing duration to maximize the compressive strength of HVFA UHPC. The experimental results using this proposed mix design method show that the optimum fly ash content of 50 wt.% of binder can be used to produce HVFA UHPC with a compressive strength of over 120 MPa and 150 MPa under standard curing and heat treatment, respectively. Moreover, the embodied CO2 emissions of UHPC reduces 56.4% with addition of 50% FA.

scholarly journals Study on using maximum amount of fly ash in producing ultra-high performance concrete

2018 ◽  
Vol 12 (3) ◽  
pp. 51-61
Author(s):  
Van Viet Thien An
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Cementitious Materials ◽  
Maximum Amount ◽  
Ultra High Performance Concrete ◽  
Design Expert ◽  
High Volume Fly Ash

In the present study, the synergic effects of cementitious materials in the ternary binder containing cement, silica fume, fly ash on the workability and compressive strength were evaluated by using the D-optimal design of Design-Expert 7. The ternary binder composed of 65 vol.-% cement, 15 vol.-% SF and 20 vol.-% FA at the W/Fv ratio of 0.50 is the optimum mixture proportions for the highest compressive strength of the UHPC. To produce the sustainable UHPC, high-volume fly ash ultra high performance concrete with a good flowability and 28-d compressive strength over 130 MPa can be produced with fly ash content up to 30 vol.-% in the binder. Article history: Received 21 March 2018, Revised 06 April 2018, Accepted 27 April 2018

scholarly journals Compressive Strength Development of High-Volume Fly Ash Ultra-High-Performance Concrete under Heat Curing Condition with Time

2020 ◽  
Vol 10 (20) ◽  
pp. 7107
Author(s):  
Pham Sy Dong ◽  
Nguyen Van Tuan ◽  
Le Trung Thanh ◽  
Nguyen Cong Thang ◽  
Viet Hung Cu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Strength Development ◽  
Ultra High Performance Concrete ◽  
Heat Curing ◽  
Compressive Strength Development ◽  
Curing Condition

This research investigated the effect of fly ash content on the compressive strength development of ultra-high-performance concrete (UHPC) at different curing conditions, i.e., the standard curing condition and the heat curing. A total of 20 mixtures were prepared to cast specimens to measure the compressive strength at different ages from 3 days to 180 days. Additionally, 300 specimens were prepared to estimate the appropriate heat curing period at the early ages in terms of enhancing the 28-day compressive strength of UHPC with high content of fly ash (FA). From the regression analysis using test data, empirical equations were formulated to assess the compressive strength development of UHPC considering the FA content and maturity function. Test results revealed that the preference of the addition of FA for enhancing the compressive strength of UHPC requires the early heat curing procedure which can be recommended as at least 2 days under 90 °C. Moreover, the compressive strength of UHPC with FA under heat curing mostly reached its 28-day strength within 3 days. The proposed models based on the fib 2010 model can be a useful tool to reliably assess the compressive strength development of UHPC with high-volume fly ash (HVFA) (up to 70% fly ash content) under a heat curing condition that possesses a different performance from that of normal- and high-strength concrete. When 50% of the cement content was replaced by FA, the embodied CO2 emission for UHPC mixture reduced up to approximately 50%, which is comparable to the CO2 emission calculated from the conventional normal-strength concrete.

scholarly journals Ultra-high-performance concrete with local high unburned carbon fly ash

DYNA ◽  
2021 ◽  
Vol 88 (216) ◽  
pp. 38-47
Author(s):  
Joaquín Abellán García ◽  
Nancy Torres Castellanos ◽  
Jaime Antonio Fernandez Gomez ◽  
Andres Mauricio Nuñez Lopez
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Unburned Carbon ◽  
High Tech ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Cost

Ultra-high-performance concrete (UHPC) is a kind of high-tech cementitious material with superb mechanical and durability properties compared to other types of concrete. However, due to the high content of cement and silica fume used, the cost and environmental impact of UHPC is considerably higher than conventional concrete. For this reason, several efforts around the world have been made to develop UHPC with greener and less expensive local pozzolans. This study aimed to design and produce UHPC using local fly ash available in Colombia. A numerical optimization, based on Design of Experiments (DoE) and multi-objective criteria, was performed to obtain a mixture with the proper flow and highest compressive strength, while simultaneously having the minimum content of cement. The results showed that, despite the low quality of local fly ashes in Colombia, compressive strength values of 150 MPa without any heat treatment can be achieved.

Experimental Study on Workability and Strength of Green High Performance Concrete with High Volume Fly Ash

2013 ◽  
Vol 859 ◽  
pp. 52-55 ◽  
Author(s):  
Yong Qiang Ma
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Ash Content ◽  
Splitting Tensile Strength ◽  
Binder Ratio ◽  
Water Binder Ratio

A great deal of experiments have been carried out in this study to reveal the effect of the water-binder ratio and fly ash content on the workability and strengths of GHPC (green high performance concrete). The workability of GHPC was evaluated by slump and slump flow. The strengths include compressive strength and splitting tensile strength. The results indicate that the increase of water-binder ratio can improve the workability of GHPC, however the strengths of GHPC were decreased with the increase of water-binder ratio. When the fly ash content is lower than 40%, the increase in fly ash content has positive effect on workability of GHPC, while the workability begins to decrease after the fly ash content is more than 40%. The addition of fly ash in GHPC has adverse effect on the strengths, and there is a tendency of decrease in the compressive strength and splitting tensile strength of GHPC with the increase of fly ash content.

A Development of the Research on High Performance Concrete Incorporated with High Volume Fly Ash

2006 ◽  
Vol 302-303 ◽  
pp. 26-34
Author(s):  
Feng Xing ◽  
Xiang Yong Guo ◽  
Fa Guang Leng ◽  
Ren Yu Zhang
Keyword(s):  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Raw Material ◽  
Engineering Practice ◽  
Fly Ash Concrete ◽  
Mix Proportion ◽  
High Volume Fly Ash ◽  
And Performance

In this paper, the main characteristic of definition, property, requirement of raw material, mix proportion design and performance improvement of high volume fly ash concrete (for short HVFAC) are summarized. The applications of HVFAC in dam, highway, building and port are introduced. The research results have shown that HVFAC have outstanding properties of physical mechanics, but some problems need to be further studied. It is believed that an operable strict corresponding technical criterion would be set down as soon as possible for engineering practice.

Sign in / Sign up

Export Citation Format

Share Document