Monitoring Technologies—Microseismic, Fiber Optic, and Tracers

2016 ◽  
pp. 701-740
Keyword(s):  
Fiber Optic ◽  
Monitoring Technologies

scholarly journals Monitoring Strategic Hydraulic Infrastructures by Brillouin Distributed Fiber Optic Sensors

Water ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 188
Author(s):  
Manuel Bertulessi ◽  
Daniele Fabrizio Bignami ◽  
Ilaria Boschini ◽  
Marco Brunero ◽  
Maddalena Ferrario ◽  
...  
Keyword(s):  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Strain Gauges ◽  
Mountain Valley ◽  
Concrete Members ◽  
Strain Monitoring ◽  
Hydropower Plants ◽  
Complex Structural ◽  
Monitoring Technologies

We present a case study of a Structural Health Monitoring (SHM) hybrid system based on Brillouin Distributed Fiber Optic Sensors (D-FOS), Vibrating Wire (VW) extensometers and temperature probes for an existing historical water penstock bridge positioned in a mountain valley in Valle d’Aosta Region, Northwestern Italy. We assessed Brillouin D-FOS performances for this kind of infrastructure, characterized by a complex structural layout and located in a harsh environment. A comparison with the more traditional strain monitoring technology offered by VW strain gauges was performed. The D-FOS strain cable has been bonded to the concrete members using a polyurethane-base adhesive, ensuring a rigid strain transfer. The raw data from all sensors are interpolated on a unique general timestamp with hourly resolution. Strain data from D-FOS and VW strain gauges are then corrected from temperature effects and compared. Considering the inherent differences between the two monitoring technologies, results show a good overall matching between strain time series collected by D-FOS and VW sensors. Brillouin D-FOS proves to be a good solution in terms of performance and economic investment for SHM systems on complex infrastructures such as hydropower plants, which involve extensive geometry combined with the need for detailed and continuous strain monitoring.

scholarly journals Monitoring Land Subsidence With The Combination of Persistent Scatterer Interferometry Techniques And Distributed Fiber Optic Sensing Techniques: A Case Study In Suzhou, China

2021 ◽  
Author(s):  
Hongwei Sang ◽  
Bin Shi ◽  
Dan Zhang ◽  
Suping Liu ◽  
Yi Lu
Keyword(s):  
Land Subsidence ◽  
Land Surface ◽  
Fiber Optic ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Persistent Scatterer Interferometry ◽  
Persistent Scatterer ◽  
Fiber Optic Sensing ◽  
Over Exploitation ◽  
Monitoring Technologies

Abstract Land subsidence is a global geo-hazard caused by various natural and human factors, and it directly threatens the safety of the environment and infrastructures. Investigating the mechanism of land subsidence is becoming more and more important. In this paper, we use the Persistent Scatterer Interferometry (PSI) technique combining the Distributed Fiber Optic Sensing (DFOS) technique to detect the spatial-temporal distributions of land subsidence and investigate the stratum deformation characteristics in Shengze, Suzhou. By analyzing Sentinel-1A date between 2017 and 2019 with the PSI technique and the deformation date derived by the DFOS technique, we conclude that the land surface deformations are mostly affected by the transitional exploitation of groundwater. The average Line-Of-Sight (LOS) deformation rate is mostly concentrated in -3 to 2.2 mm/yr, and a maximum subsidence rate of up to -16.9 mm/yr is observed in four industrial areas. Meanwhile, the DFOS-derived results reveal that the compression strata are mostly concentrated in 41.2-137.9 m depth, which is closely associated with the pore water pressure in the second confined aquifer. And it also reveals that the groundwater over-exploitation may be the significant triggering factor of the subsidence in the study area. The InSAR-derived results are also evaluated by the deformation time series obtained by the DFOS technique. The combination of those two new sensing and monitoring technologies enables us to highlight the large deformation area and reveal the mechanism of its subsidence, which is conducive to urban development, disaster risk management, and rational exploitation and management of groundwater in Suzhou.

scholarly journals Application of distributed fiber optic sensing technique in land subsidence monitoring in coastal areas: a case study in Tianjin, China

2020 ◽  
Vol 382 ◽  
pp. 137-141
Author(s):  
Su-Ping Liu ◽  
Bin Shi ◽  
Kai Gu ◽  
Cheng-Cheng Zhang ◽  
Song Zhang ◽  
...  
Keyword(s):  
Land Subsidence ◽  
Fiber Optic ◽  
Brillouin Scattering ◽  
Coastal Areas ◽  
The Novel ◽  
Fiber Optic Sensing ◽  
Monitoring Technologies ◽  
Subsidence Monitoring ◽  
Good Agreement

Abstract. Land subsidence is a worldwide geohazard caused by various factors, and its direct impact is loss of elevation, which is especially severe in coastal areas due to sea level rise. Quantifying contributions of compressed strata is significant for evaluating the subsidence. In this paper, we used distributed fiber optic sensing (DFOS) with Brillouin scattering to monitor the strain distribution along optical cables embedded in a borehole located in Tianjin, China. The novel technique revealed that the land subsidence rate was 21.2 mm a−1 from 2017 to 2019. The strata contributed to the subsidence have been identified in the range of 3 to 35 m. The results showed good agreement with those obtained by a group of extensometers. We demonstrated that DFOS could be a supplement to land subsidence monitoring technologies in coastal areas.

Imaging and diffraction modes in Scanning Transmission Electron Microscopy

1986 ◽  
Vol 44 ◽  
pp. 684-687
Author(s):  
J. M. Cowley ◽  
R. Glaisher ◽  
J. A. Lin ◽  
H.-J. Ou
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
High Efficiency ◽  
Fiber Optic ◽  
Image Intensifier ◽  
Detector System ◽  
Detector Plane ◽  
Secondary Electrons ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Special Detector

Some of the most important applications of STEM depend on the variety of imaging and diffraction made possible by the versatility of the detector system and the serial nature, of the image acquisition. A special detector system, previously described, has been added to our STEM instrument to allow us to take full advantage of this versatility. In this, the diffraction pattern in the detector plane may be formed on either of two phosphor screens, one with P47 (very fast) phosphor and the other with P20 (high efficiency) phosphor. The light from the phosphor is conveyed through a fiber-optic rod to an image intensifier and TV system and may be photographed, recorded on videotape, or stored digitally on a frame store. The P47 screen has a hole through it to allow electrons to enter a Gatan EELS spectrometer. Recently a modified SEM detector has been added so that high resolution (10Å) imaging with secondary electrons may be used in conjunction with other modes.

Synthesis, performance and growth mechanism of silver nanoparticle coated SERS fiber probe

2019 ◽  
Vol 107 (3) ◽  
pp. 305
Author(s):  
Mengmei Geng ◽  
Yuting Long ◽  
Tongqing Liu ◽  
Zijuan Du ◽  
Hong Li ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Reaction Time ◽  
Growth Mechanism ◽  
Fiber Optic ◽  
Fiber Optic Probe ◽  
Visible Absorption ◽  
Fiber Probe ◽  
Surface Enhanced Raman ◽  
Optic Probe

Surface-enhanced Raman Scattering (SERS) fiber probe provides abundant interaction area between light and materials, permits detection within limited space and is especially useful for remote or in situ detection. A silver decorated SERS fiber optic probe was prepared by hydrothermal method. This method manages to accomplish the growth of silver nanoparticles and its adherence on fiber optic tip within one step, simplifying the synthetic procedure. The effects of reaction time on phase composition, surface plasmon resonance property and morphology were investigated by X-ray diffraction analysis (XRD), ultraviolet-visible absorption spectrum (UV-VIS absorption spectrum) and scanning electron microscope (SEM). The results showed that when reaction time is prolonged from 4–8 hours at 180 °C, crystals size and size distribution of silver nanoparticles increase. Furthermore, the morphology, crystal size and distribution density of silver nanoparticles evolve along with reaction time. A growth mechanism based on two factors, equilibrium between nucleation and growth, and the existence of PVP, is hypothesized. The SERS fiber probe can detect rhodamin 6G (R6G) at the concentration of 10−6 M. This SERS fiber probe exhibits promising potential in organic dye and pesticide residue detection.

Increasing the information capacity of a fiber-optic multi-sensor converter of binary mechanical signals into electrical signals

2020 ◽  
pp. 15-23
Author(s):  
V. M. Grechishnikov ◽  
E. G. Komarov
Keyword(s):  
Fiber Optic ◽  
Information Capacity ◽  
Parallel Structure ◽  
Optical Scheme ◽  
Digital To Analog Converter ◽  
Electrical Signals ◽  
Mechanical Signals ◽  
Analog Converter ◽  
Output Code ◽  
Digital To Analog

The design and operation principle of a multi-sensor Converter of binary mechanical signals into electrical signals based on a partitioned fiber-optic digital-to-analog Converter with a parallel structure is considered. The digital-to-analog Converter is made from a set of simple and technological (three to five digit) fiber-optic digital-to-analog sections. The advantages of the optical scheme of the proposed. Converter in terms of metrological and energy characteristics in comparison with single multi-bit converters are justified. It is shown that by increasing the number of digital-analog sections, it is possible to repeatedly increase the information capacity of a multi-sensor Converter without tightening the requirements for its manufacturing technology and element base. A mathematical model of the proposed Converter is developed that reflects the features of its operation in the mode of sequential time conversion of the input code vectors of individual fiber-optic sections into electrical analogues and the formation of the resulting output code vector.

Hydrostatic Fiber Optic Liquid Level Sensor with position sensitive detector

Metrologiya ◽  
2020 ◽  
pp. 38-51
Author(s):  
V. N. Astapov ◽  
I. N. Kozlova
Keyword(s):  
Fiber Optic ◽  
Effective Area ◽  
Raw Material ◽  
Position Sensitive Detector ◽  
Fiber Optic Sensor ◽  
Liquid Level ◽  
Problem Solution ◽  
Sensitive Detector ◽  
Position Sensitive ◽  
Triangulation Sensor

This article presents the rationale and methodology for developing an intrinsically safe device, namely, a hydrostatic fiber optic sensor with a position-sensitive detector for monitoring the level of oil products in large-capacity tanks at oil depots and during pumping in a raw material warehouses. This device suitable for continuous monitoring of the liquid level, based on the measurement of a hydrostatic column of liquid with automatic offset of changes in the density of the liquid. Offset is carried out by means of a displacer (a fully submerged float), inside which a housing with a position-sensitive detector (PSD) is integrated. Theoretical validation of the bellows suspension usage for a displacer is given. During filling a container with a liquid whose level is measured, liquid bellows, the movement of which is recorded by an optical triangulation sensor using the reflected infrared ray incident on the bottom of the bellows. The principle of the triangulation sensor operation is based on the geometric properties of the triangles. The pulses of infrared radiation come through a fiber optic cable. In order to measure the movement of the surface (the bottom of the bellows) by measuring the movement of the reflected beam, a position-sensitive detector is used, which is located in a remote controller. In this device for the intrinsic safety problem solution, optical inputs of a fiber optic flat cable are located in the active zone of the sensor, which is connected to the optical inputs of a position-sensitive detector, operated on the principles of photoelectric effect. The light spot moving along the sensitive zone and converted by the detector into a one-dimensional signal proportional to the distance to the object. hydrostatically applies pressure over the entire effective area of the measuring

High-voltage monitoring by the fiber-optic recirculating measuring system

2020 ◽  
pp. 38-44
Author(s):  
A. V. Polyakov ◽  
M. A. Ksenofontov
Keyword(s):  
Optical Fibers ◽  
High Voltage ◽  
Optical Sensors ◽  
Electromagnetic Interference ◽  
Fiber Optic ◽  
Electric Power Industry ◽  
Measuring System ◽  
Voltage Range ◽  
External Electromagnetic Fields ◽  
Optic Communication

Optical technologies for measuring electrical quantities attract great attention due to their unique properties and significant advantages over other technologies used in high-voltage electric power industry: the use of optical fibers ensures high stability of measuring equipment to electromagnetic interference and galvanic isolation of high-voltage sensors; external electromagnetic fields do not influence the data transmitted from optical sensors via fiber-optic communication lines; problems associated with ground loops are eliminated, there are no side electromagnetic radiation and crosstalk between the channels. The structure and operation principle of a quasi-distributed fiber-optic high-voltage monitoring system is presented. The sensitive element is a combination of a piezo-ceramic tube with an optical fiber wound around it. The device uses reverse transverse piezoelectric effect. The measurement principle is based on recording the change in the recirculation frequency under the applied voltage influence. When the measuring sections are arranged in ascending order of the measured effective voltages relative to the receiving-transmitting unit, a relative resolution of 0,3–0,45 % is achieved for the PZT-5H and 0,8–1,2 % for the PZT-4 in the voltage range 20–150 kV.

Sign in / Sign up

Export Citation Format

Share Document