Displacement calculation of helical curved beams based on ULM

2016 ◽  
pp. 399-401
Author(s):  
Jie-Min Liu ◽  
Zhi-Ying Zhang ◽  
Qiu-Yu Wei
Keyword(s):  
Curved Beams

scholarly journals Stress-driven two-phase integral elasticity for Timoshenko curved beams

2021 ◽  
pp. 239779142199051
Author(s):  
Marzia S Vaccaro ◽  
Francesco P Pinnola ◽  
Francesco Marotti de Sciarra ◽  
Marko Canadija ◽  
Raffaele Barretta
Keyword(s):  
Solution Procedure ◽  
Small Scale ◽  
Curved Beams ◽  
Sensors And Actuators ◽  
Two Phase ◽  
Design And Optimization ◽  
Local Responses ◽  
Size Dependent ◽  
Classical Boundary ◽  
Phase Integral

In this research, the size-dependent static behaviour of elastic curved stubby beams is investigated by Timoshenko kinematics. Stress-driven two-phase integral elasticity is adopted to model size effects which soften or stiffen classical local responses. The corresponding governing equations of nonlocal elasticity are established and discussed, non-classical boundary conditions are detected and an effective coordinate-free solution procedure is proposed. The presented mixture approach is elucidated by solving simple curved small-scale beams of current interest in Nanotechnology. The contributed results could be useful for design and optimization of modern sensors and actuators.

Vibration of multi-supported curved beams

1974 ◽  
Vol 32 (3) ◽  
pp. 359-IN2 ◽  
Author(s):  
M. Petyt ◽  
C.C. Fleischer
Keyword(s):  
Curved Beams

Pretwisted Curved Beams of Thin-Walled Open Section

1972 ◽  
Vol 39 (3) ◽  
pp. 779-785 ◽  
Author(s):  
A. I. Soler
Keyword(s):  
Numerical Technique ◽  
Equations Of Motion ◽  
Highway Bridges ◽  
Major Effect ◽  
Curved Beams ◽  
Open Section ◽  
Straight Beam ◽  
Thin Walled ◽  
Bending Modes ◽  
Axes Of Symmetry

Equations of motion are derived for coupled extension, flexure, and torsion of pretwisted curved bars of thin-walled, open section. The derivation is based on energy principles and includes inertia terms. The major effect of initial pretwist is to allow coupling of all possible beam deformation modes; however, if the bar is straight and has two axes of symmetry, pretwist causes coupling only between the two bending modes, and between extension and torsion. The governing equations are presented in first-order form, and a numerical technique is suggested for the case of space varying pretwist. It is suggested that these equations may form the basis for a simplified study of the effect of superelevation on the static and dynamic response of curved highway bridges. Finally, a simple straight beam with uniform pretwist is studied to compare effects of pretwist and restrained torsion in a thin-walled beam of open section.

Stress concentration factors for the torsion of curved beams of arbitrary cross-section

2006 ◽  
Vol 220 (12) ◽  
pp. 1709-1726 ◽  
Author(s):  
R E Cornwell
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Cross Section ◽  
Cross Sections ◽  
Shear Stresses ◽  
Curved Beams ◽  
Finite Element Implementation ◽  
Out Of Plane ◽  
Concentration Factors ◽  
Stress Concentration Factors

There are numerous situations in machine component design in which curved beams with cross-sections of arbitrary geometry are loaded in the plane of curvature, i.e. in flexure. However, there is little guidance in the technical literature concerning how the shear stresses resulting from out-of-plane loading of these same components are effected by the component's curvature. The current literature on out-of-plane loading of curved members relates almost exclusively to the circular and rectangular cross-sections used in springs. This article extends the range of applicability of stress concentration factors for curved beams with circular and rectangular cross-sections and greatly expands the types of cross-sections for which stress concentration factors are available. Wahl's stress concentration factor for circular cross-sections, usually assumed only valid for spring indices above 3.0, is shown to be applicable for spring indices as low as 1.2. The theory applicable to the torsion of curved beams and its finite-element implementation are outlined. Results developed using the finite-element implementation agree with previously available data for circular and rectangular cross-sections while providing stress concentration factors for a wider variety of cross-section geometries and spring indices.

In-plane vibration analysis of phononic crystal curved beams

2016 ◽  
Vol 64 (5) ◽  
pp. 658-667 ◽  
Author(s):  
Donghua Wang ◽  
Shuai Zhijun ◽  
Liu Wei ◽  
Chen Meilong ◽  
Liu Siyuan ◽  
...  
Keyword(s):  
Vibration Analysis ◽  
Phononic Crystal ◽  
Curved Beams ◽  
Plane Vibration
Sign in / Sign up

Export Citation Format

Share Document