Thermodynamic and Structural Parameters of Phospholipid Membranes

2016 ◽  
pp. 32-53
Keyword(s):  
Structural Parameters ◽  
Phospholipid Membranes

Optimal design of a high homogeneous and small-size shim coil for atomic spin gyroscope based on 0-1 linear programming

2020 ◽  
Vol 64 (1-4) ◽  
pp. 165-172
Author(s):  
Dongge Deng ◽  
Mingzhi Zhu ◽  
Qiang Shu ◽  
Baoxu Wang ◽  
Fei Yang
Keyword(s):  
Linear Programming ◽  
Power Consumption ◽  
Low Power ◽  
Optimization Design ◽  
Structural Parameters ◽  
Axial Position ◽  
Low Power Consumption ◽  
Optimal Method ◽  
Atomic Spin ◽  
Shim Coil

It is necessary to develop a high homogeneous, low power consumption, high frequency and small-size shim coil for high precision and low-cost atomic spin gyroscope (ASG). To provide the shim coil, a multi-objective optimization design method is proposed. All structural parameters including the wire diameter are optimized. In addition to the homogeneity, the size of optimized coil, especially the axial position and winding number, is restricted to develop the small-size shim coil with low power consumption. The 0-1 linear programming is adopted in the optimal model to conveniently describe winding distributions. The branch and bound algorithm is used to solve this model. Theoretical optimization results show that the homogeneity of the optimized shim coil is several orders of magnitudes better than the same-size solenoid. A simulation experiment is also conducted. Experimental results show that optimization results are verified, and power consumption of the optimized coil is about half of the solenoid when providing the same uniform magnetic field. This indicates that the proposed optimal method is feasible to develop shim coil for ASG.

A Possible Basis for Nondestructive Characterization of Ropes of Nylon 6

1997 ◽  
Vol 503 ◽  
Author(s):  
H. Jiang ◽  
M. K. Davis ◽  
R. K. Eby ◽  
P. Arsenovic
Keyword(s):  
Tensile Strength ◽  
Service Life ◽  
Fiber Diameter ◽  
Structural Parameters ◽  
Crystal Form ◽  
Nylon 6 ◽  
Remaining Service Life ◽  
Nondestructive Characterization ◽  
Fractional Content

ABSTRACTPhysical properties and structural parameters have been measured for ropes of nylon 6 as a function of the number of use operations. The fractional content of the α crystal form, sound velocity, birefringence, tensile strength and length all increase systematically and significantly with increasing the number of use operations. The fractional content of the γ crystal form and fiber diameter decrease with use. These trends indicate that the measurement of such properties and structural parameters, especially the length, provide a possible basis for establishing a reliable, rapid, and convenient nondestructive characterization method to predict the remaining service life of nylon 6 ropes.

Structural Parameters of Bacterial Plankton in Ponds with High Contents of Mineral Nitrogen

2007 ◽  
Vol 43 (5) ◽  
pp. 91-100
Author(s):  
Ye. V. Starosila ◽  
G. N. Oleynik ◽  
Yu. G. Krot
Keyword(s):  
Structural Parameters ◽  
Mineral Nitrogen

Structural, optical and electrical properties of thermal evaporated nano sized In2Te3 thin films

2018 ◽  
Vol 1 (1) ◽  
pp. 21-25
Author(s):  
R Revathi ◽  
R Karunathan
Keyword(s):  
Thin Films ◽  
Negative Temperature Coefficient ◽  
Thermal Evaporation ◽  
Structural Parameters ◽  
Negative Temperature ◽  
Resistivity Measurements ◽  
Allowed Transition ◽  
Evaporation Technique ◽  
Indium Telluride ◽  
Made In

Indium Telluride thin films were prepared by thermal evaporation technique. Films were annealed at 573K under vacuum for an hour. Both as-deposited and annealed films were used for characterization. The structural parameters were discussed on the basis of annealing effect for a film of thickness 1500 Å. Optical analysis was carried out on films of different thicknesses for both as - deposited and annealed samples. Both the as- deposited and annealed films exhibit direct and allowed transition. Electrical resistivity measurements were made in the temperature range of 303-473 K using Four-probe method. The calculated resistivity value is of the order of 10-6 ohm meter. The activation energy value decreases with increasing film thickness. The negative temperature coefficient indicates the semiconducting nature of the film.

Sign in / Sign up

Export Citation Format

Share Document