A Study on Possibilities for Cellulose-Based Textile Waste Treatmentinto Powder-Like Fillers for Emulsion Rubbers

2016 ◽  
pp. 37-53
Author(s):  
V Misin
Keyword(s):  
Textile Waste

Textile Waste and Haptic Feedback for Wearable Robotics

2018 ◽  
Author(s):  
Hellen van Rees ◽  
◽  
Angelika Mader ◽  
Merlijn Smits ◽  
Geke Ludden ◽  
...  
Keyword(s):  
Haptic Feedback ◽  
Textile Waste ◽  
Wearable Robotics

Decolorization of Textile Waste Effluents by Ozonation

1991 ◽  
Vol 21 (2) ◽  
pp. 143-156 ◽  
Author(s):  
Sheng H. Lin ◽  
Chi M. Lin
Keyword(s):  
Textile Waste ◽  
Waste Effluents

scholarly journals Pre-treatments of pre-consumer cotton-based textile waste for production of textile fibres in the cold NaOH(aq) and cellulose carbamate processes

Cellulose ◽  
2021 ◽  
Author(s):  
Marjo Määttänen ◽  
Maria Gunnarsson ◽  
Helena Wedin ◽  
Sara Stibing ◽  
Carina Olsson ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Raw Material ◽  
Textile Waste ◽  
Future Studies ◽  
Degree Of Polymerisation ◽  
Textile Fibres ◽  
Cellulose Carbamate ◽  
Regenerated Fibres ◽  
Inorganic Content

AbstractRecycling of textiles is of importance due to the large amount of waste generated from the increasing consumption and use worldwide. Cotton-rich pre-consumer textiles are considered as potential raw material for production of man-made regenerated fibres, but demands purification from the blends with synthetic fibres as well as the dyes and finishing chemicals. In this study we explore the use of different pre-treatments of pre-consumer textiles to meet specific parameters for production of fibres in the cold NaOH(aq) or cellulose carbamate process. The pre-treatments consisted of different bleaching sequences and were performed on both uncoloured and coloured pre-consumer textiles. For the uncoloured textile, degree of polymerisation and amount of inorganic content was efficiently reduced making the material suitable for both the cold NaOH(aq) and the cellulose carbamate process. In case of the coloured textile, the pre-treatments were able to remove the dye and decrease the inorganic content as well as reduce the degree of polymerisation but only sufficiently enough for production of fibres in the cellulose carbamate process. The work was able to prove a fibre-to-fibre concept while further optimisation of the regeneration steps is expected to improve the mechanical properties of the produced fibres in future studies.

Textile waste as precursors in nanocrystalline cellulose synthesis

Cellulose ◽  
2021 ◽  
Author(s):  
Andrielen Braz Vanzetto ◽  
Lilian Vanessa Rossa Beltrami ◽  
Ademir José Zattera
Keyword(s):  
Nanocrystalline Cellulose ◽  
Cellulose Synthesis ◽  
Textile Waste

scholarly journals A Textile Waste Fiber-Reinforced Cement Composite: Comparison between Short Random Fiber and Textile Reinforcement

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3742
Author(s):  
Payam Sadrolodabaee ◽  
Josep Claramunt ◽  
Mònica Ardanuy ◽  
Albert de la Fuente
Keyword(s):  
Construction Material ◽  
Drying Shrinkage ◽  
Cement Composite ◽  
Nonwoven Fabric ◽  
Textile Waste ◽  
Nonwoven Fabrics ◽  
Potential Applications ◽  
Reinforced Cement ◽  
The One ◽  
Garment And Textile

Currently, millions of tons of textile waste from the garment and textile industries are generated worldwide each year. As a promising option in terms of sustainability, textile waste fibers could be used as internal reinforcement of cement-based composites by enhancing ductility and decreasing crack propagation. To this end, two extensive experimental programs were carried out, involving the use of either fractions of short random fibers at 6–10% by weight or nonwoven fabrics in 3–7 laminate layers in the textile waste-reinforcement of cement, and the mechanical and durability properties of the resulting composites were characterized. Flexural resistance in pre- and post-crack, toughness, and stiffness of the resulting composites were assessed in addition to unrestrained drying shrinkage testing. The results obtained from those programs were analyzed and compared to identify the optimal composite and potential applications. Based on the results of experimental analysis, the feasibility of using this textile waste composite as a potential construction material in nonstructural concrete structures such as facade cladding, raised floors, and pavements was confirmed. The optimal composite was proven to be the one reinforced with six layers of nonwoven fabric, with a flexural strength of 15.5 MPa and a toughness of 9.7 kJ/m2.

scholarly journals Modified textile waste for heavy metals removal

2020 ◽  
Vol 6 ◽  
pp. 927-932 ◽  
Author(s):  
Patcharin Racho ◽  
Weesuda Waiwong
Keyword(s):  
Heavy Metals ◽  
Textile Waste ◽  
Heavy Metals Removal ◽  
Metals Removal

scholarly journals Investigation of the decomplexation of polyamide/ CaCl 2 complex toward a green, nondestructive recovery of polyamide from textile waste

2021 ◽  
pp. 51170
Author(s):  
Barbara Rietzler ◽  
Avinash P. Manian ◽  
Dorian Rhomberg ◽  
Thomas Bechtold ◽  
Tung Pham
Keyword(s):  
Textile Waste

Promoting Diels-Alder reactions to produce bio-BTX: Co-aromatization of textile waste and plastic waste over USY zeolite

2021 ◽  
pp. 127966
Author(s):  
Jia Wang ◽  
Jianchun Jiang ◽  
Jinhua Ding ◽  
Xiaobo Wang ◽  
Yunjuan Sun ◽  
...  
Keyword(s):  
Diels Alder ◽  
Plastic Waste ◽  
Usy Zeolite ◽  
Textile Waste
Sign in / Sign up

Export Citation Format

Share Document