Quality of Service in 5G Network ........................................................ VALERY TIKHVINSKIY AND GRIGORY BOCHECHKA

2016 ◽  
pp. 117-132
Author(s):  
Omar Abdulkareem Mahmood ◽  
Abdukodir Khakimov ◽  
Ammar Muthanna ◽  
Alexander Paramonov

Author(s):  
Behrooz Daneshmand

The quality of service (QoS) in networking is the process of managing network resources to reduce packet loss and to lower network jitter and latency. QoS has been widely used in traditional network and can also be implemented in the 5G standard based on a software-defined network (SDN). A traditional network carries several challenges, such as vendor dependency, the complexity of managing a large network, dynamically changing forwarding policies, and more. Software-defined networking is a new networking strategy designed to address the challenges of a traditional IP network, such as high levels of complexity and inability to adapt to the new quality of service requirements in a timely manner. The fundamental idea behind SDNs compared to the conventional networking paradigm is the creation of horizontally integrated systems through the separation of the control and the data plane while providing an increasingly sophisticated set of abstractions. Recently, various SDN-enabled QoS frameworks have emerged that offer many possibilities for network reconfiguration and high-level definition of policies. QoS requirements for 5G networks have been defined on the basis of three main categories of use cases: extreme mobile broadband (xMBB), massive machine type communications (mMTC) IoT/M2M devices, and highly reliable М2М-communication (ultra-reliable machine-type communications – uMTC). This paper analyzes and surveys the QoS based on the openflow protocol method and QoS based on open-source SDN controllers method in 5G network. In addition, we discuss various architectural issues of open-source SDN controllers network and examine their impact on the QoS. Furthermore, we outline the characteristics of the QoS parameters such as latency, availability, reliability, jitter, and bandwidth in the 5G network. Finally, the article discusses and compares parameters of the QoS in 5G determined by world’s leaders in 5G technology.


Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1830 ◽  
Author(s):  
Anum Ali ◽  
Ghalib A. Shah ◽  
Junaid Arshad

Resource allocation for machine-type communication (MTC) devices is one of the keys challenges in the 5G network as it affects the lifetime of battery powered devices and also the quality of service of the applications. MTC devices are battery restrained and cannot afford a lot of power consumption due to spectrum usage. In this paper, we propose a novel resource allocation algorithm termed threshold controlled access (TCA) protocol. We propose a novel technique of uplink resource allocation in which the devices make a decision of resource allocation blocks based on their battery status and related application’s power profile that eventually leads to required quality of service (QoS) metric. The first phase of the TCA algorithm selects the number of carriers to be allocated to a certain device for the better lifetime of low power MTC devices. In the second phase, the efficient solution is implemented through inducing a threshold value. A certain value of the threshold is selected through a mapping based on a QoS metric. The threshold enhances the selection of subcarriers for less powered devices, such as small e-health sensors. The algorithm is simulated for the physical layer of the 5G network. Simulation results show that the proposed algorithm is less complex and achieves better performance when compared to existing solutions in the literature.


2021 ◽  
Author(s):  
Lydia Sharon Rose G ◽  
Ameelia Roseline A

HetNet (Heterogeneous Network) has been suggested for next age group wireless systems to meet the exceptional difficulties of advanced data rates. The specifications for various levels of QoS (Quality of Service) from various kinds of wireless requests and service areas are met. In this HetNet in to improve the QoSand SINR (Signal to Interference plus Noise Ratio), many techniques have been performed to provide satisfactory outcomes. This paper gives a comparative survey on the QoS and various techniques used, which are used to enhance QoS.


TecnoLógicas ◽  
2018 ◽  
Vol 21 (43) ◽  
pp. 27-41 ◽  
Author(s):  
Kevin Sneider Ibarra-Lancheros ◽  
Gustavo Puerto-Leguizamón ◽  
Carlos Suárez-Fajardo

This paper presents the evaluation of the quality of service parameters provided by the network slicing approach for 5G networks based on a software-defined networking environment. The open source controller Floodlight made bandwidth allocation decisions by assigning network slices to user profiles on particular topologies. The objective is to control the bandwidth resources that allow to guarantee latency and reliability values according to the type of service in a sliced 5G network. Thus, it was possible to demonstrate the versatility and scalability of the Floodlight controller, which reduced the loss rate by 10% in a congested network and ensured delays of less than 700ms in applications such as VoIP and video streaming sharing a channel with a limited bit rate of 5 Mbps.


Author(s):  
Susi Minarsih ◽  
Ary Sutrischastini

The aims of this study are to measure the level of service quality and how to improve the quality of service execution in re-measurement tera and tera of UTTP in Commerce On duty Co-Operation, Industrial and Commerce Of Sub-Province of Pacitan. This research’s object is traditional market of Minulyo Pacitan as mains market in Sub-Province of Pacitan with 100 perpetrator people of sample as user/owner of UTTP (ukur,timbang, takar, dan perlengkapannya) with method intake of sampel by Convenience Sampling. The technique of collecting data uses questionnaires and direct interview. This research use qualitative analysis instrument test of validity and reliability to know valid or not and reliabel or not about the questions of questionnaire. Then, this research was done with Servqual method as instrument to do measurement of service quality. The measurement of service quality in Servqual method pursuant to five service dimension that is tangibles, responsiveness, realibility, assurance, and empathy. This research will be measured of gap 5 that is difference among performance and its expectation. Ad for yielded gap from a enumeration of Servqual 5 gap, -146 progressively lower him mount the quality of given service activities. Therefore, its needs the existence of priority repair of service quality, in this case is service of remeasurement tera and tera of UTTP at biggest difference or gap that is at variable of Responsiveness ( Energy Listen carefully) and attribute that has smallest difference that is – 0.44 at dimension question of variable of Tangibles ( Evidence Physical). Keyword: Quality Of Service, Method of Service Quality.


2018 ◽  
Vol 2 (1) ◽  
pp. 1-15
Author(s):  
Intan Nurrachmi

This study departs from the hajj bailout financing facility which is a booming product because of the customer's interest, but in this case there is a difference in the target achievement between Bank Syariah Mandiri (BSM) Ujungberung KCP which is less successful in improving the hajj bailout products while the Rancaekek KCP is very superior in one consolidation Ahmad Yani Branch Office Bandung. This is what is interesting for researchers to carry out this research, the difference constraints include service quality and promotion factors. This phenomenon raises problems that must be examined, namely how the influence of service quality and promotion of market share expansion products hajj bailouts at Bank Syariah Mandiri KCP Ujungberung and KCP Rancaekek Bandung. This study aims academically to contribute in the study of Islamic economics in worksheets, especially the quality of service and promotion of market share expansion and practically expected to be able to provide input to all employees of BSM KCP Ujungberung regarding the quality of service and promotion of market expansion of bailout products. Hajj that has been successfully carried out by BSM KCP Rancaekek.The conclusion of this study is that there is a significant influence of service quality on the expansion of market share by 53.3% with a strong correlation of 0.730 and through t test, where t counts at 8.245 (> t table), then H_0 is rejected and H_i is accepted. Furthermore, there is a significant influence of promotion on the expansion of market share by 30.3% with a moderate / sufficient correlation of 0.550 through t test, where t counts is 4.219 (> t table), then H_ (0) is rejected and H_i is accepted. Then there is a significant influence of service quality and promotion simultaneously to the expansion of market share by 60.6% and a strong correlation of 0.784 and through Test F, where F count is 67.023 (> F table), then 〖H〗 _ ( 0) rejected and H_i accepted.


2019 ◽  
Vol 27 (2) ◽  
pp. 119-133
Author(s):  
Putri Aprilia Isnaini ◽  
Ida Bagus Nyoman Udayana

This writing is done to determine the effect of information quality and service quality on attitudes in the use of application systems with the ease of use of the system as an intervining variable in online transportation services (gojek) in Yogyakarta. The sample in this study is customers who use online motorcycle transportation services in Yogyakarta. The sampling technique uses accidental sampling technique. Data collection is done by distributing online questionnaires through the Goegle form and distributed with social media such as WhatsApp and Instagram on a 1-4 scale to measure 4 indicators. The results of this study show 1) the quality of information affects the ease of use, 2) the quality of service affects the ease of use, 3) the quality of information influences attitudes in use, 4) the quality of services does not affect attitudes in use, and 5) ease of use attitude in use.


Liquidity ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 72-80
Author(s):  
Viva Faronika ◽  
Asriyal Asriyal

If the customer is greater than acceptable level of service, the cutomer is not satisfied. Conversely, if an acceptable level of service greater than the expectations of customers, the customer will be satisfied. This means that if Bank BRI branch Fatmawati can improve service quality to its customer it will affect the level of satisfaction. In this research found evidence that, in terms of the creation of quality services, Bank BRI branch Fatmawati is one of the branches that participate to implement the established policies and service in accordance with the exiting service standard in the banking world. Amount of influence the determination of quality of service policies applied by the Bank BRI branch Fatmawati indicated by r2. r2 value only 45 % and the rest 55 % influenced by other variables not studied. Meanwhile, the variable relationship of service quality to customer satisfaction can be seen from the values r = 0,67. This shows the value of the correlation coefficient between the variables of service quality to customer satisfaction. This means there are strong relationships between the independent variable X (quality of service) to the dependent variable Y (customer satisfaction). Since r = 0,67 (67 %) greater then 50 %.


Sign in / Sign up

Export Citation Format

Share Document