Coupled multiscale nonlinear dynamic analyses of Reinforced Concrete Shear Wall buildings

2016 ◽  
pp. 113-116
Keyword(s):  
Reinforced Concrete ◽  
Nonlinear Dynamic ◽  
Shear Wall ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses

Nonlinear seismic response predictions of walls coupled with steel and concrete beams

1998 ◽  
Vol 25 (5) ◽  
pp. 803-818 ◽  
Author(s):  
Kent A Harries ◽  
Denis Mitchell ◽  
Richard G Redwood ◽  
William D Cook
Keyword(s):  
Reinforced Concrete ◽  
Nonlinear Dynamic ◽  
Steel Beams ◽  
Coupling Beam ◽  
Coupling Beams ◽  
Coupled Wall ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses ◽  
Steel Coupling Beam ◽  
Steel Coupling Beams

The design and nonlinear dynamic analyses of four coupled wall prototype structures are presented. Two ductile partially coupled and two ductile coupled wall structures are considered, each having reinforced concrete and steel coupling beams. The design of each of the prototype structures was based on the provisions of the 1995 National Building Code of Canada. Nonlinear dynamic analyses of each structure, using four different scaled earthquake ground motions are presented and the results discussed. Comparisons of the responses of the structures with concrete and steel coupling beams are made, demonstrating the advantages of using steel beams to couple reinforced concrete walls.Key words: composite construction, coupled wall, diagonally reinforced concrete coupling beam, "flexure critical" steel coupling beam, seismic design, "shear critical" steel coupling beam.

Study on Ground Motion Intensities and Modification for Seismic Analysis of Reinforced Concrete Frames

2014 ◽  
Vol 1065-1069 ◽  
pp. 1438-1442
Author(s):  
Dong An ◽  
Tie Jun Qu
Keyword(s):  
Reinforced Concrete ◽  
Ground Motion ◽  
Nonlinear Dynamic ◽  
Seismic Analysis ◽  
Reinforced Concrete Buildings ◽  
Intensity Measure ◽  
Concrete Buildings ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses ◽  
Spectrum Matching

The selection of input ground motion for seismic analysis of the structure is a complicated task, especially when nonlinear dynamic analysis is utilized. A decision has to be made regarding the intensity measure better to represent the potential damage of the ground motion. This paper presents a lot of analysis to deal with the problem. A set of nonlinear dynamic analyses were conducted on reinforced concrete buildings widely present in China. Input ground motions contain uncertainty and variability comes from both natural recordings and synthetic data. First, a set of natural recordings is considered. Second, two ground motion modification schemes are used in this study: magnitude scaling and spectrum matching. Third, a set of ground motion is synthesized. The peak value of displacement has been selected as the response parameter better able to represent the structural damage level. Nonlinear dynamic analyses of reinforced concrete buildings simulated by OpenSEES are carried out to evaluate the correlation coefficients of displacement response and the chosen ground motion parameters. Findings from the investigation indicate that the Housner intensity is the more effective intensity measure for selecting the seismic input. The synthesized ground motion fit with code spectrum shows good performance as a design input motion. Considering ground motion modification, spectrum matching is generally more stable in response prediction than scaling.

The Influence of Modified Natural Records on Seismic Response of Reinforced Concrete Structure

2014 ◽  
Vol 711 ◽  
pp. 477-480
Author(s):  
Dong An ◽  
Tie Jun Qu
Keyword(s):  
Reinforced Concrete ◽  
Seismic Response ◽  
Ground Motion ◽  
Nonlinear Dynamic ◽  
Reinforced Concrete Structure ◽  
Reinforced Concrete Frame ◽  
Magnitude Scaling ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses ◽  
Spectrum Matching

The choice of input ground motion in the evaluation of the seismic response is a complicated task. The ground motion parameters need to be determined by the scope of the analysis and the potential damage of new or existing buildings. This work presents nonlinear dynamic analyses on reinforced concrete frame widely present in China. Input ground motions contain uncertainty and variability comes from both natural recordings and modified ones. Magnitude scaling and spectrum matching are used in this study. Nonlinear dynamic analyses of reinforced concrete buildings simulated by SeismoStruct and OpenSEES are carried out to evaluate the seismic response. Findings from the investigation indicate that spectrum matching is generally stable and shows good performance in response prediction.

scholarly journals A Prediction Model for the Calculation of Effective Stiffness Ratios of Reinforced Concrete Columns

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1792
Author(s):  
Sourav Das ◽  
Iman Mansouri ◽  
Satyabrata Choudhury ◽  
Amir H. Gandomi ◽  
Jong Wan Hu
Keyword(s):  
Reinforced Concrete ◽  
Nonlinear Dynamic ◽  
Gene Expression Programming ◽  
Nonlinear Dynamic Analysis ◽  
Effective Stiffness ◽  
Sensitivity Analyses ◽  
Computation Method ◽  
Geometrical Parameters ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses

Nonlinear dynamic analyses of reinforced concrete (RC) frame buildings require the use of effective stiffness of members to capture the effect of cracked section stiffness. In the design codes and practices, the effective stiffness of RC sections is given as an empirical fraction of the gross stiffness. However, a more precise estimation of the effective stiffness is important as it affects the distribution of forces and various demands and response parameters in nonlinear dynamic analyses. In this study, an evolutionary computation method called gene expression programming (GEP) was used to predict the effective stiffness ratios of RC columns. Constitutive relationships were obtained by correlating the effective stiffness ratio with the four mechanical and geometrical parameters. The model was developed using a database of 226 samples of nonlinear dynamic analysis results collected from another study by the author. Subsequent parametric and sensitivity analyses were performed and the trends of the results were confirmed. The results indicate that the GEP model provides precise estimations of the effective stiffness ratios of the RC frames.

Numerical Investigations on the Seismic Response of Masonry Building Aggregates

2010 ◽  
Vol 133-134 ◽  
pp. 715-720 ◽  
Author(s):  
Ilaria Senaldi ◽  
Guido Magenes ◽  
Andrea Penna
Keyword(s):  
Seismic Response ◽  
Nonlinear Dynamic ◽  
Masonry Building ◽  
Structural Units ◽  
Numerical Investigations ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses ◽  
Building Aggregates

The work focuses on the analysis of the seismic response of masonry building aggregates for a better understanding of the vulnerability of single structural units and of their behaviour within the aggregates. Idealized representative models are developed based on the typical characteristics of the row conglomeration typology. The seismic response of the models is evaluated and discussed by means of nonlinear dynamic analyses.

Implications of cumulated seismic damage on the seismic performance of unreinforced masonry buildings

2014 ◽  
Vol 47 (2) ◽  
pp. 157-170 ◽  
Author(s):  
Amaryllis Mouyiannou ◽  
Andrea Penna ◽  
Maria Rota ◽  
Francesco Graziotti ◽  
Guido Magenes
Keyword(s):  
Nonlinear Dynamic ◽  
Fragility Curves ◽  
Seismic Damage ◽  
Unreinforced Masonry ◽  
Masonry Building ◽  
Masonry Buildings ◽  
Seismic Capacity ◽  
Building Stock ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses

The seismic capacity of a structure is a function of the characteristics of the system as well as of its state, which is mainly affected by previous damage and deterioration. The cumulative damage from repeated shocks (for example during a seismic sequence or due to multiple events affecting an unrepaired building stock) affects the vulnerability of masonry buildings for subsequent events. This paper proposes an analytical methodology for the derivation of state-dependent fragility curves, taking into account cumulated seismic damage, whilst neglecting possible ageing effects. The methodology is based on nonlinear dynamic analyses of an equivalent single degree of freedom system, properly calibrated to reproduce the static and dynamic behaviour of the structure. An application of the proposed methodology to an unreinforced masonry case study building is also presented. The effect of cumulated damage on the seismic response of this prototype masonry building is further studied by means of nonlinear dynamic analyses with the accelerograms recorded during a real earthquake sequence that occurred in Canterbury (New Zealand) between 2010 and 2012.

Sign in / Sign up

Export Citation Format

Share Document