MODELING AND ANALYSIS OF STRESS–STRAIN STATE IN MULTILAYER COATINGS OF ELECTRIC CABLES AT EXTERNAL LOADS

2016 ◽  
pp. 309-314
Keyword(s):  
Strain State ◽  
Multilayer Coatings ◽  
Stress Strain ◽  
Modeling And Analysis ◽  
Stress Strain State ◽  
Electric Cables ◽  
External Loads

Modeling of the stress-state longwall face during coal mining with the technology of roof management complete drop and stowing

2020 ◽  
pp. 99-106
Author(s):  
I. E. Mazina ◽  
A. A. Stel’makhov ◽  
L. F. Mullagalieva
Keyword(s):  
Coal Mining ◽  
Strain State ◽  
Underground Mining ◽  
Negative Impact ◽  
Hydrological Regime ◽  
Coal Bed ◽  
Stress Strain ◽  
Environmental Friendliness ◽  
Modeling And Analysis ◽  
Stress Strain State

Underground mining of coal deposits has a negative impact on all components of the environment. When developing a coal deposit, it is coal mining technology that determines the scale and consequences of the negative impact. Changes in the stress-strain state of the geo-environment can lead to a violation of the hydrological regime, increased gas emission from the host rocks, the initiation of gas-dynamic processes. Choice of roofing management technology - as a geotechnological method of natural and technical system management determines the environmental friendliness of coal mining and creates safety conditions. The article deals with the technology of roofing control during coal production. For this purpose mathematical modeling and analysis of stress-strain state of the bottomhole part of the coal bed for the conditions of S.M. Kirov is performed. As a result of modeling, two technologies of roof control were analyzed - complete caving and stowing. For the worked out clearing leaves filled with either caving rocks or stowing material, there are characteristic unloading zones in the massif to be worked and overworked, as well as pressure reference zones, which fall on the parts of the pillars associated with the lava. It was found out that the application of the stowing technology creates conditions for minimization of gravitational stresses in the geoenvironment, as well as significantly reduces the potential energy of form change.

Stress-Strain State Exploration of Stringer Made of Composite Materials Depending on Layers Stacking Structure

2018 ◽  
Vol 284 ◽  
pp. 71-76
Author(s):  
P.V. Solovyev ◽  
A.I. Gomzin ◽  
L.A. Ishbulatov ◽  
S.N. Galyshev ◽  
F.F. Musin
Keyword(s):  
Composite Materials ◽  
Cross Section ◽  
Strain State ◽  
Stress Strain ◽  
Stress Strain State ◽  
Airplane Wing ◽  
External Loads ◽  
Stacking Structure ◽  
Composite Carbon ◽  
Shaped Cross Section

In this article the results of stress-strain state investigation for composite airplane wing stringer with different layers stacking structures are presented. As an object of research, a stringer made of composite carbon with V-shaped cross-section is considered. Due to the stress-strain state analysis of various stringer structures, the most effective structure for stringer layers stacking is selected, both in the view of providing the most rigidity and optimal perception by the stringer the field of external loads, which are most typical for the conditions of its operation.

scholarly journals MODELING AND ANALYSIS OF THE DEFORMED MEDIA (METAL CONSTRUCTION ELEMENTS) NON STATIONARY THERMAL FIELDS DURING THEIR LASER SHORT WAVES PULSES TREATMENT

2021 ◽  
pp. 277-296
Author(s):  
Yuriy Chovnyuk ◽  
Petro Cherednichenko ◽  
Volodymyr Kravchyuk ◽  
Olga Ostapushchenko ◽  
Eugenie Ivanov
Keyword(s):  
Strain State ◽  
Fourier Method ◽  
Laser Pulses ◽  
Porous Films ◽  
Stress Strain ◽  
Modeling And Analysis ◽  
Thermal Fields ◽  
Short Waves ◽  
Stress Strain State ◽  
Metal Construction

Substantiated mathematical model for non-stationary thermoelastic deformed media during their laser processing by short waves pulses fields analysis is proposed . Precise analytical solutions of the thermal conductivity equations  which simulate the short laser pulses interaction and allow to further determine their components thermally stress-strain state of the processed materials, in particular, thin porous films, capillary-porous bodies are obtained. Two analysis methods were used: 1) traditional separating variables method (Fourier method), 2) non-Fourier analysis of the non-stationary thermal fields that described by the telegraphic equation known in the literature. The results obtained in this work can be used further to establish the thermo stress-strain state of materials interacting with short waves laser radiation pulses parameters. Such approach is used at the modern building process for the rising of the reliability, durability and strength of the metal construction elements.

scholarly journals The evolute gearing stress-strain state modeling and analysis in the Autodesk Fusion

2018 ◽  
Vol 0 (25(1301)) ◽  
pp. 131-134
Author(s):  
Roman Protasov ◽  
Aleksandr Ustinenko ◽  
Sergej Andrienko ◽  
Vitaliy Tkachenko
Keyword(s):  
Strain State ◽  
Stress Strain ◽  
Modeling And Analysis ◽  
Stress Strain State

КОНСТРУКТИВНО-ТЕХНОЛОГІЧНІ ОСОБЛИВОСТІ ХВОСТО-ВИХ БАЛОК СІТЧАСТОГО ТИПУ З ПОЛІМЕРНИХ КОМПО-ЗИЦІЙНИХ МАТЕРІАЛІВ ВЕРТОЛЬОТІВ ТРАНСПОРТНОЇ КАТЕГОРІЇ

2020 ◽  
pp. 15-30
Author(s):  
А. Г. Гребеников ◽  
И. В. Малков ◽  
В. А. Урбанович ◽  
Н. И. Москаленко ◽  
Д. С. Колодийчик
Keyword(s):  
Finite Element ◽  
Strain State ◽  
Layer Structure ◽  
Metal Structure ◽  
Element Model ◽  
Stress Strain ◽  
Element Analysis ◽  
Mesh Structure ◽  
Stress Strain State ◽  
Mesh Structures

The analysis of the design and technological features of the tail boom (ТB) of a helicopter made of polymer composite materials (PCM) is carried out.Three structural and technological concepts are distinguished - semi-monocoque (reinforced metal structure), monocoque (three-layer structure) and mesh-type structure. The high weight and economic efficiency of mesh structures is shown, which allows them to be used in aerospace engineering. The physicomechanical characteristics of the network structures are estimated and their uniqueness is shown. The use of mesh structures can reduce the weight of the product by a factor of two or more.The stress-strain state (SSS) of the proposed tail boom design is determined. The analysis of methods for calculating the characteristics of the total SSS of conical mesh shells is carried out. The design of the tail boom is presented, the design diagram of the tail boom of the transport category rotorcraft is developed. A finite element model was created using the Siemens NX 7.5 system. The calculation of the stress-strain state (SSS) of the HC of the helicopter was carried out on the basis of the developed structural scheme using the Advanced Simulation module of the Siemens NX 7.5 system. The main zones of probable fatigue failure of tail booms are determined. Finite Element Analysis (FEA) provides a theoretical basis for design decisions.Shown is the effect of the type of technological process selected for the production of the tail boom on the strength of the HB structure. The stability of the characteristics of the PCM tail boom largely depends on the extent to which its design is suitable for the use of mechanized and automated production processes.A method for the manufacture of a helicopter tail boom from PCM by the automated winding method is proposed. A variant of computer modeling of the tail boom of a mesh structure made of PCM is shown.The automated winding technology can be recommended for implementation in the design of the composite tail boom of the Mi-2 and Mi-8 helicopters.

Sign in / Sign up

Export Citation Format

Share Document