Water-Absorption-Measurement instrument for masonry façades

2015 ◽  
pp. 281-286
Author(s):  
M Stelzmann ◽  
U Möller ◽  
R Plagge
Keyword(s):  
Water Absorption ◽  
Measurement Instrument ◽  
Absorption Measurement

scholarly journals UJI KUAT TEKAN DAYA SERAP AIR DAN MASSA JENIS BATU BATA MERAH BERBAHAN TAMBAHAN ABU KULIT DAN JANGGEL JAGUNG DI WULUHAN JEMBER

2021 ◽  
Vol 10 (2) ◽  
pp. 41
Author(s):  
Mei Sofiatul Hasanah ◽  
Yushardi Yushardi ◽  
Albertus Djoko Lesmono
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Building Materials ◽  
Construction Materials ◽  
Base Material ◽  
Absorption Measurement ◽  
Building Construction ◽  
Corn Cob ◽  
Quality Construction

The increase in Indonesia's development activities increases people's consumption of more quality construction materials and is easy to reach in terms of price. Building materials with good quality can improve the quality of building construction. The increasing need of the community for building materials triggered the development of the brick-making industry. Redbrick is an element of building used in building construction made from clay base material with or without other mixed materials. This research is a type of experimental research. The purpose of this study is to know and analyze the composition of the addition of corn bark ash and ash corn cob appropriately to produce the quality of bricks with high compressive strength, low water absorption, and large density. Additional materials in this study in the form of corn bark ash and ash corn cob. The quality of red bricks is seen from three aspects, namely compressive strength, water absorption, and density. The largest compressive strength was obtained in the addition of ash corn cob by 2.5% by 37.2 Kg/Cm2 and the compressive strength of 49.5 Kg/Cm2 on the addition of corn skin ash by 2.5%. Water absorption measurement of all types of red bricks the results of the study showed all the results of water absorption is not eligible sni. The highest density was obtained from a mixture of 2.5% ash corn cob material of 17.5 gr/Cm3. the best composition to produce bricks with strong compressive value and high density and have low water absorption is 2.5% addition of ash corn cob and the addition of 2.5% corn skin ash. Keywords: Red bricks, strong press, water absorption, density.

Team-Related Knowledge Measurement Instrument

2007 ◽  
Author(s):  
Tristan E. Johnson ◽  
Youngmin Lee ◽  
Miyoung Lee ◽  
Debra L. O'Connor ◽  
Mohammed K. Khalil ◽  
...  
Keyword(s):  
Measurement Instrument ◽  
Knowledge Measurement

Effect of ink and paperboard characteristics on flexographic print quality based on print density

TAPPI Journal ◽  
2011 ◽  
Vol 10 (9) ◽  
pp. 7-13
Author(s):  
KHODADAD MALMIRCHEGINI ◽  
FARSHAD SARKHOSH RAHMANI
Keyword(s):  
Water Absorption ◽  
Significant Influence ◽  
Particle Diameter ◽  
Print Quality ◽  
Printing Technology ◽  
Plastic Films ◽  
Printing Inks ◽  
Packaging Industry ◽  
Solids Content ◽  
Density Results

Flexography is an evolving printing technology that is suitable for printing on coated and uncoated paperboard and board, nonporous substrates including metalized and paperboard foils, and plastic films used especially in the packaging industry. This study evaluated the effect of paperboard and ink characteristics on flexographic print density in paperboard. Three commercial paperboards from different companies were prepared: brown kraft from Thailand, white kraft from Spain, and test liner from Iran. Four samples of process print inks from Iran were used in this investigation. Paperboard properties, such as roughness and water absorption, and ink characteristics, including solids content, PH and particle diameter, were measured. The inks were printed on paperboards using a roll no.15 applicator with a blade metering device, and the print densities were measured. Results showed that solids content, pH, and particle diameter of printing inks influenced print density, while the roughness and water absorption of the three types of paperboard had no significant influence on print density. Results also illustrated that two levels of ink viscosity (25–30 and 50–55 mPa·s) were insignificant to print density.

Effects of Natural Fiber Reinforcement on Water Absorption of Compressed Stabilized Earth Blocks

2012 ◽  
Vol 2 (11) ◽  
pp. 165-167
Author(s):  
B.O .Ugwuishiwu B.O .Ugwuishiwu ◽  
◽  
B.O. Mama B.O. Mama ◽  
N. M Okoye N. M Okoye
Keyword(s):  
Water Absorption ◽  
Natural Fiber ◽  
Fiber Reinforcement ◽  
Earth Blocks
Sign in / Sign up

Export Citation Format

Share Document