General Conclusion: From Old Concepts, Old and Recent Experimental Data and Reasoning and New Experimental Results, to a Hybrid Model of Muscle Contraction

2015 ◽  
pp. 289-292
Keyword(s):  
Experimental Data ◽  
Muscle Contraction ◽  
Hybrid Model ◽  
Experimental Results ◽  
Recent Experimental Data

Modeling of the Effects of Radiolysis on UO2-dissolution Employing Recent Experimental Data

2003 ◽  
Vol 807 ◽  
Author(s):  
Mats Jonsson ◽  
Fredrik Nielsen ◽  
Ella Ekeroth ◽  
Trygve E. Eriksen
Keyword(s):  
Experimental Data ◽  
Uranium Dioxide ◽  
Kinetic Data ◽  
Experimental Results ◽  
Recent Experimental Data ◽  
Water Radiolysis ◽  
Spent Fuel ◽  
Inhibiting Effect ◽  
Effect Of Water ◽  
Radiolysis Products

ABSTRACTThis study examines the effect of water radiolysis on the dissolution of uranium dioxide. A model is created to describe the system of uranium dioxide fragments in water, and the production and reactions of radiolysis products (using recent kinetic data). The system is evaluated under different conditions using MAKSIMA-CHEMIST. Conditions examined include presence of carbonate in the water and effects of hydrogen. The simulations are compared to experimental results on spent fuel dissolution. Surprisingly, the simulated U(VI)-release agrees within a factor of three with the experimentally found U(VI)-release. The inhibiting effect of hydrogen is clearly demonstrated by the simulations. From the results of the simulations we are also able to conclude that the main inhibiting effect of H2 is the reaction with OH• and not the reduction of U(VI) to U(IV).

scholarly journals Bounds on ortho-positronium and J/ψ–Υ quarkonia invisible decays and constraints on hidden braneworlds in a SO(3,1)-broken 5D bulk

2020 ◽  
Vol 35 (06) ◽  
pp. 2050032
Author(s):  
Michaël Sarrazin ◽  
Coraline Stasser
Keyword(s):  
Experimental Data ◽  
Planck Scale ◽  
Energy Scale ◽  
Matter Content ◽  
Experimental Results ◽  
Recent Experimental Data ◽  
Invisible Decays ◽  
Vacuum Cavity ◽  
Distance Formula

While our visible Universe could be a 3-brane, some cosmological scenarios consider that other 3-branes could be hidden in the extra-dimensional bulk. Matter disappearance toward a hidden brane is mainly discussed for neutron — both theoretically and experimentally — but other particles are poorly studied. Recent experimental results offer new constraints on positronium or quarkonium invisible decays. In the present work, we show how a two-brane Universe allows for such invisible decays. We put this result in the context of the recent experimental data to constrain the brane energy scale [Formula: see text] (or effective brane thickness [Formula: see text]) and the interbrane distance [Formula: see text] for a relevant two-brane Universe in a [Formula: see text]-broken 5D bulk. Quarkonia present poor bounds compared to the results deduced from previous passing-through-walls-neutron experiments for which scenarios with [Formula: see text] GeV and [Formula: see text] fm are excluded. By contrast, positronium experiments can compete with neutron experiments depending on the matter content of each brane. To constrain scenarios up to the Planck scale, positronium experiments in vacuum cavity should be able to reach [Formula: see text].

Fusion and Breakup Reactions of 17S + 208Pb and 15C + 232ThHalo Nuclei Systems

2015 ◽  
Vol 11 (2) ◽  
pp. 2972-2978
Author(s):  
Fouad A. Majeed ◽  
Yousif A. Abdul-Hussien
Keyword(s):  
Experimental Data ◽  
Cross Section ◽  
Fusion Reaction ◽  
Fusion Cross Section ◽  
Reaction Cross ◽  
Recent Experimental Data ◽  
Barrier Distribution ◽  
Coupled Channel ◽  
Total Fusion ◽  
Full Quantum

In this study the calculations of the total fusion reaction cross section have been performed for fusion reaction systems 17F + 208Pb and 15C + 232Th which involving halo nuclei by using a semiclassical approach.The semiclassical treatment is comprising the WKB approximation to describe the relative motion between target and projectile nuclei, and Continuum Discretized Coupled Channel (CDCC) method to describe the intrinsic motion for both target and projectile nuclei. For the same of comparsion a full quantum mechanical clacualtions have been preforemd using the (CCFULL) code. Our theorticalrestuls are compared with the full quantum mechaincialcalcuations and with the recent experimental data for the total fusion reaction  checking the stability of the distancesThe coupled channel calculations of the total fusion cross section σfus, and the fusion barrier distribution Dfus. The comparsion with experiment proves that the semiclassiacl approach adopted in the present work reproduce the experimental data better that the full quantal mechanical calcautions. 

Convective Losses From Cavity Solar Receivers—Comparisons Between Analytical Predictions and Experimental Results

1983 ◽  
Vol 105 (1) ◽  
pp. 29-33 ◽  
Author(s):  
A. M. Clausing
Keyword(s):  
Experimental Data ◽  
Experimental Evidence ◽  
Analytical Model ◽  
Excellent Agreement ◽  
Experimental Results ◽  
Simple Analytical Model ◽  
Refined Model ◽  
Wall Area

Cavity solar receivers are generally believed to have higher thermal efficiencies than external receivers due to reduced losses. A simple analytical model was presented by the author which indicated that the ability to heat the air inside the cavity often controls the convective loss from cavity receivers. Thus, if the receiver contains a large amount of inactive hot wall area, it can experience a large convective loss. Excellent experimental data from a variety of cavity configurations and orientations have recently become available. These data provided a means of testing and refining the analytical model. In this manuscript, a brief description of the refined model is presented. Emphasis is placed on using available experimental evidence to substantiate the hypothesized mechanisms and assumptions. Detailed comparisons are given between analytical predictions and experimental results. Excellent agreement is obtained, and the important mechanisms are more clearly delineated.

A Technique for the Laboratory Determination of Recirculation in Single Needle Dialysis

1993 ◽  
Vol 16 (2) ◽  
pp. 63-70 ◽  
Author(s):  
N.A. Hoenich ◽  
P.T. Smirthwaite ◽  
C. Woffindin ◽  
P. Lancaster ◽  
T.H. Frost ◽  
...  
Keyword(s):  
Experimental Data ◽  
Flow Rate ◽  
Experimental Results ◽  
New Technique ◽  
Treatment Efficiency ◽  
Single Lumen ◽  
Theoretical Predictions ◽  
Lumen Catheter ◽  
A New Technique

Recirculation is an important factor in single needle dialysis and, if high, can compromise treatment efficiency. To provide information regarding recirculation characteristics of access devices used in single needle dialysis, we have developed a new technique to characterise recirculation and have used this to measure the recirculation of a Terumo 15G fistula needle and a VasCath SC2300 single lumen catheter. The experimentally obtained results agreed well with those established clinically (8.5 ± 2.4% and 18.4 ± 3.4%). The experimental results have also demonstrated a dependence on access type, pump speeds and fistula flow rate. A comparison of experimental data with theoretical predictions showed that the latter exceeded those measured with the largest contribution being due to the experimental fistula.

Validating Numerical CFD Simulations With Experimental Data for Turbulence Phenomena in Axial Flow Gas Turbine Diffusers

2009 ◽  
Author(s):  
Farrokh Zarifi-Rad ◽  
Hamid Vajihollahi ◽  
James O’Brien
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Axial Flow ◽  
Experimental Results ◽  
Scale Model ◽  
Data Set ◽  
Pressure Profiles ◽  
Scale Models ◽  
Inlet Conditions

Scale models give engineers an excellent understanding of the aerodynamic behavior behind their design; nevertheless, scale models are time consuming and expensive. Therefore computer simulations such as Computational Fluid Dynamics (CFD) are an excellent alternative to scale models. One must ask the question, how close are the CFD results to the actual fluid behavior of the scale model? In order to answer this question the engineering team investigated the performance of a large industrial Gas Turbine (GT) exhaust diffuser scale model with performance predicted by commercially available CFD software. The experimental results were obtained from a 1:12 scale model of a GT exhaust diffuser with a fixed row of blades to simulate the swirl generated by the last row of turbine blades five blade configurations. This work is to validate the effect of the turbulent inlet conditions on an axial diffuser, both on the experimental front and on the numerical analysis approach. The object of this work is to bring forward a better understanding of velocity and static pressure profiles along the gas turbine diffusers and to provide an accurate experimental data set to validate the CFD prediction. For the CFD aspect, ANSYS CFX software was chosen as the solver. Two different types of mesh (hexagonal and tetrahedral) will be compared to the experimental results. It is understood that hexagonal (HEX) meshes are more time consuming and more computationally demanding, they are less prone to mesh sensitivity and have the tendancy to converge at a faster rate than the tetrahedral (TET) mesh. It was found that the HEX mesh was able to generate more consistent results and had less error than TET mesh.

Heats of mixing of binary mixtures of pyridine base with n-alkane

1988 ◽  
Vol 66 (7) ◽  
pp. 1625-1627 ◽  
Author(s):  
Teresa Kasprzycka-Guttman ◽  
Juan H. Vera
Keyword(s):  
Experimental Data ◽  
Binary Mixtures ◽  
Experimental Results ◽  
Pyridine Base ◽  
Heats Of Mixing

Heats of mixing of 2,4-lutidine and 2,4,6-collidine with n-alkanes were measured at 293.15 K using an isothermal dilution calorimeter. Experimental results were fitted with a Redlich–Kister polynomial. Experimental data and coefficients for the Redlich–Kister polynomials are reported.

A Statistical Adaptable Distribution Function Model for Low Probabilities of Failure

1993 ◽  
Author(s):  
Suryaji R. Bhonsle ◽  
Paul Thompson
Keyword(s):  
Experimental Data ◽  
Distribution Function ◽  
Experimental Results ◽  
Function Model ◽  
Log Normal ◽  
Function Models

Abstract Weibull, log normal, and some other Distribution function models (D.F.M.) have a tendency to deviate from experimental results. This deviation, either exceedingly conservative or nonconservative, is amplified at low probabilities of failure. To remedy such problems a new D.F.M. is derived. It is then used to predict low probabilities of failure. The predictions are consistent with experimental data and are not too conservative or too nonconservative.

Lherzolite - carbonatite melt interaction in the presence of additive CO2 and H2O: Experimental data at 5.5 GPa and 1200-1450°C

2021 ◽  
Author(s):  
Aleksei Kruk ◽  
Alexander Sokol
Keyword(s):  
Experimental Data ◽  
Lithospheric Mantle ◽  
Fluid Phase ◽  
Experimental Results ◽  
Silicate Melt ◽  
Silicate Melts ◽  
Garnet Lherzolite ◽  
Russian Science ◽  
Continental Lithospheric Mantle

<p>We study the reaction of garnet lherzolite with carbonatitic melt rich in molecular CO<sub>2</sub> and/or H<sub>2</sub>O in experiments at 5.5 GPa and 1200-1450°C. The experimental results show that carbonation of olivine with formation of orthopyroxene and magnesite can buffer the CO<sub>2</sub> contents in the melt, which impedes immediate separation of CO<sub>2</sub> fluid from melt equilibrated with the peridotite source. The solubility of molecular CO<sub>2</sub> in melt decreases from 20-25 wt.% at 4.5-6.8 wt.% SiO<sub>2</sub> typical of carbonatite to 7-12 wt.% in more silicic kimberlite-like melts with 26-32 wt.% SiO<sub>2</sub>. Interaction of garnet lherzolite with carbonatitic melt (2:1) in the presence of 2-3 wt.% H<sub>2</sub>O and 9-13 wt.% molecular CO<sub>2</sub> at 1200-1450°С yields low SiO<sub>2</sub> (<10 wt.%) alkali‐carbonatite melts, which shows multiphase saturation with magnesite-bearing garnet harzburgite. Thus, carbonatitic melts rich in volatiles can originate in a harzburgite source at moderate temperatures common to continental lithospheric mantle (CLM).</p><p>Having separated from the source, carbonatitic magma enriched in molecular CO<sub>2</sub> and H<sub>2</sub>O can rapidly acquire a kimberlitic composition with >25 wt.% SiO<sub>2 </sub>by dissolution and carbonation of entrapped peridotite. Furthermore, interaction of garnet lherzolite with carbonatitic melt rich in K, CO<sub>2</sub>, and H<sub>2</sub>O at 1350°С produces immiscible kimberlite-like carbonate-silicate and K-rich silicate melts. Quenched silicate melt develops lamelli of foam-like vesicular glass. Differentiation of immiscible melts early during ascent may equalize the compositions of kimberlite magmas generated in different CLM sources. The fluid phase can release explosively from ascending magma at lower pressures as a result of SiO<sub>2</sub> increase which reduces the solubility of CO<sub>2</sub> due to decarbonation reaction of magnesite and orthopyroxene.</p><p>The research was performed by a grant of the Russian Science Foundation (19-77-10023).</p>

Sign in / Sign up

Export Citation Format

Share Document