Wave energy devices

2015 ◽  
pp. 261-430 ◽  
Keyword(s):  
Wave Energy ◽  
Energy Devices

Optimization of Mooring Configuration Parameters of Floating Wave Energy Converters

2011 ◽  
Author(s):  
Pedro C. Vicente ◽  
Anto´nio F. O. Falca˜o ◽  
Paulo A. P. Justino
Keyword(s):  
Wave Energy ◽  
Oil And Gas ◽  
Wave Energy Converter ◽  
Domain Model ◽  
Floating Point ◽  
Mooring System ◽  
Energy Converter ◽  
Energy Devices ◽  
Wave Energy Converters ◽  
Energy Converters

Floating point absorbers devices are a large class of wave energy converters for deployment offshore, typically in water depths between 40 and 100m. As floating oil and gas platforms, the devices are subject to drift forces due to waves, currents and wind, and therefore have to be kept in place by a proper mooring system. Although similarities can be found between the energy converting systems and floating platforms, the mooring design requirements will have some important differences between them, one of them associated to the fact that, in the case of a wave energy converter, the mooring connections may significantly modify its energy absorption properties by interacting with its oscillations. It is therefore important to examine what might be the more suitable mooring design for wave energy devices, according to the converters specifications. When defining a mooring system for a device, several initial parameters have to be established, such as cable material and thickness, distance to the mooring point on the bottom, and which can influence the device performance in terms of motion, power output and survivability. Different parameters, for which acceptable intervals can be established, will represent different power absorptions, displacements from equilibrium position, load demands on the moorings and of course also different costs. The work presented here analyzes what might be, for wave energy converter floating point absorber, the optimal mooring configuration parameters, respecting certain pre-established acceptable intervals and using a time-domain model that takes into account the non-linearities introduced by the mooring system. Numerical results for the mooring forces demands and also motions and absorbed power, are presented for two different mooring configurations for a system consisting of a hemispherical buoy in regular waves and assuming a liner PTO.

Numerical and Experimental Analysis of a Hybrid Wind-Wave Offshore Floating Platform’s Hull

2018 ◽  
Author(s):  
Thiago S. Hallak ◽  
José F. Gaspar ◽  
Mojtaba Kamarlouei ◽  
Miguel Calvário ◽  
Mário J. G. C. Mendes ◽  
...  
Keyword(s):  
Wave Energy ◽  
Experimental Analysis ◽  
Wind Wave ◽  
Numerical Study ◽  
Energy Devices ◽  
Wave Energy Converters ◽  
Wave Basin ◽  
Hybrid Concept ◽  
Point Absorbers ◽  
The Stability

This paper presents a study regarding a novel hybrid concept for both wind and wave energy offshore. The concept resembles a semi-submersible wind platform with a larger number of columns. Wave Energy Devices such as point absorbers are to be displayed around the unit, capturing wave energy while heaving and also enhancing the stability of the platform. In this paper, a first numerical study of the platform’s hull, without Wave Energy Converters, is carried out. Experiments in wave basin regarding the same unit have been conducted and the results are presented and compared to the numerical ones. Both stability and seakeeping performances are assessed and compared.

Coordinators Overview and Lessons Learned From the Galway Bay Seatrials of the FP7 EU Funded CORES Wave Energy Project

2013 ◽  
Author(s):  
Raymond Alcorn ◽  
Anthony Lewis ◽  
Mark Healy
Keyword(s):  
Renewable Energy ◽  
Wave Energy ◽  
Energy Systems ◽  
Project Manager ◽  
Lessons Learned ◽  
Ocean Energy ◽  
Renewable Energy Systems ◽  
Energy Devices ◽  
Ocean Renewable Energy ◽  
The Coordinator

The paper discusses the lessons learned from the European Funded Framework 7 Research project Components for Ocean Renewable Energy Systems (CORES) which developed and trialed new components and systems for ocean energy devices. The authors are the coordinator and project manager so the paper will give this overview of the project. This will include detail of the work packages, major achievements, significant impacts, summary results and outcomes of the sea trials.

scholarly journals Sensor Measurement Strategies for Monitoring Offshore Wind and Wave Energy Devices

2015 ◽  
Vol 628 ◽  
pp. 012117 ◽  
Author(s):  
Deirdre O'Donnell ◽  
Bruno Srbinovsky ◽  
Jimmy Murphy ◽  
Emanuel Popovici ◽  
Vikram Pakrashi
Keyword(s):  
Wave Energy ◽  
Offshore Wind ◽  
Energy Devices ◽  
Sensor Measurement ◽  
Measurement Strategies

Joint Distribution of Environmental Condition at Five European Offshore Sites for Design of Combined Wind and Wave Energy Devices

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
Lin Li ◽  
Zhen Gao ◽  
Torgeir Moan
Keyword(s):  
Renewable Energy ◽  
Wave Energy ◽  
Environmental Data ◽  
Offshore Wind ◽  
Response Analysis ◽  
Energy Devices ◽  
Joint Distributions ◽  
Wave Parameters ◽  
Extreme Response

The design of wind turbines requires information about joint data for wind and wave conditions. Moreover, combining offshore wind and wave energy facilities is a potential way to reduce the cost of offshore wind farms. To design combined offshore renewable energy concepts, it is important to choose sites where both wind and wave energy resources are substantial. This paper deals with joint environmental data for five European offshore sites which serve as basis for the analysis and comparison of combined renewable energy concepts developed in the EU FP7 project—MARINA Platform. The five sites cover both shallow and deep water, with three sites facing the Atlantic Ocean and two sites in the North Sea. The long-term joint distributions of wind and wave parameters are presented for these sites. Simultaneous hourly mean wind and wave hindcast data from 2001 to 2010 are used as a database. The joint distributions are modeled by fitting analytical distributions to the hindcast data. The long-term joint distributions can be used to estimate the wind and wave power output from each combined concept and to estimate the fatigue lifetime of the structure. The marginal distributions of wind and wave parameters are also provided. Based on the joint distributions, contour surfaces are established for combined wind and wave parameters for which the probability of exceedance corresponds to a return period of 50 years. The design points on the 50-year contour surfaces are suggested for extreme response analysis of combined concepts.

Sign in / Sign up

Export Citation Format

Share Document