Introduction to RT-LAB and Real-Time Implementation of Type 2 FLC-Based SHAF Control Strategies

2015 ◽  
pp. 121-144
Keyword(s):  
Real Time ◽  
Control Strategies

Real-Time Implementation of Type-2 FLC–Based Shunt Active Filter Control Strategies (p–q and Id–Iq) with Different Fuzzy MFs for Power Quality Improvement

2014 ◽  
Vol 15 (3) ◽  
pp. 217-236
Author(s):  
Suresh Mikkili ◽  
Anup Kumar Panda
Keyword(s):  
Real Time ◽  
Power Quality ◽  
Control Strategies ◽  
Voltage Regulation ◽  
Active Filter ◽  
Electrical Network ◽  
Voltage Source ◽  
Shunt Active Filter ◽  
Three Phase

Abstract This research article proposes the shunt active filter (SHAF) control strategies (p–q and Id–Iq), which are used to improve the power quality of the electrical network by mitigating the harmonics with the help of Type-2 fuzzy logic controller (Type-2 FLC) different membership functions (MFs). Three-phase reference current waveforms generated by proposed scheme are tracked by the three-phase voltage source converter in a hysteresis band control scheme. The performance of the proposed control strategies has been evaluated in terms of harmonic mitigation and DC link voltage regulation under various source conditions. In order to maintain DC link voltage constant and to generate the compensating reference currents, we have developed Type-2 FLC with different fuzzy MFs (trapezoidal, triangular and Gaussian). The SHAF with proposed Type-2 FLC using Gaussian MF is able to eliminate the uncertainty in the system and SHAF gains outstanding compensation abilities. The detailed real-time results using real-time digital simulator are presented to support the feasibility of proposed control strategies.

Pollution based real time control strategies for combined sewer systems

1997 ◽  
Vol 36 (8-9) ◽  
pp. 331-336 ◽  
Author(s):  
Gabriela Weinreich ◽  
Wolfgang Schilling ◽  
Ane Birkely ◽  
Tallak Moland
Keyword(s):  
Real Time ◽  
Control Strategies ◽  
Ammonia Nitrogen ◽  
Simple Extension ◽  
Real Time Control ◽  
Time Control ◽  
Sewer Systems ◽  
Receiving Waters ◽  
Tunnel System

This paper presents results from an application of a newly developed simulation tool for pollution based real time control (PBRTC) of urban drainage systems. The Oslo interceptor tunnel is used as a case study. The paper focuses on the reduction of total phosphorus Ptot and ammonia-nitrogen NH4-N overflow loads into the receiving waters by means of optimized operation of the tunnel system. With PBRTC the total reduction of the Ptot load is 48% and of the NH4-N load 51%. Compared to the volume based RTC scenario the reductions are 11% and 15%, respectively. These further reductions could be achieved with a relatively simple extension of the operation strategy.

scholarly journals Power Hardware-in-the-Loop-Based Performance Analysis of Different Converter Controllers for Fast Active Power Regulation in Low-Inertia Power Systems

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3274
Author(s):  
Jose Rueda Torres ◽  
Zameer Ahmad ◽  
Nidarshan Veera Kumar ◽  
Elyas Rakhshani ◽  
Ebrahim Adabi ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Power Systems ◽  
Real Time ◽  
Control Strategies ◽  
Active Power ◽  
Power Electronic ◽  
Hardware In The Loop ◽  
Digital Controllers ◽  
Power Regulation ◽  
The Impact

Future electrical power systems will be dominated by power electronic converters, which are deployed for the integration of renewable power plants, responsive demand, and different types of storage systems. The stability of such systems will strongly depend on the control strategies attached to the converters. In this context, laboratory-scale setups are becoming the key tools for prototyping and evaluating the performance and robustness of different converter technologies and control strategies. The performance evaluation of control strategies for dynamic frequency support using fast active power regulation (FAPR) requires the urgent development of a suitable power hardware-in-the-loop (PHIL) setup. In this paper, the most prominent emerging types of FAPR are selected and studied: droop-based FAPR, droop derivative-based FAPR, and virtual synchronous power (VSP)-based FAPR. A novel setup for PHIL-based performance evaluation of these strategies is proposed. The setup combines the advanced modeling and simulation functions of a real-time digital simulation platform (RTDS), an external programmable unit to implement the studied FAPR control strategies as digital controllers, and actual hardware. The hardware setup consists of a grid emulator to recreate the dynamic response as seen from the interface bus of the grid side converter of a power electronic-interfaced device (e.g., type-IV wind turbines), and a mockup voltage source converter (VSC, i.e., a device under test (DUT)). The DUT is virtually interfaced to one high-voltage bus of the electromagnetic transient (EMT) representation of a variant of the IEEE 9 bus test system, which has been modified to consider an operating condition with 52% of the total supply provided by wind power generation. The selected and programmed FAPR strategies are applied to the DUT, with the ultimate goal of ascertaining its feasibility and effectiveness with respect to the pure software-based EMT representation performed in real time. Particularly, the time-varying response of the active power injection by each FAPR control strategy and the impact on the instantaneous frequency excursions occurring in the frequency containment periods are analyzed. The performed tests show the degree of improvements on both the rate-of-change-of-frequency (RoCoF) and the maximum frequency excursion (e.g., nadir).

scholarly journals Power Hardware-in-the-Loop: Response of Power Components in Real-Time Grid Simulation Environment

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 593
Author(s):  
Moiz Muhammad ◽  
Holger Behrends ◽  
Stefan Geißendörfer ◽  
Karsten von Maydell ◽  
Carsten Agert
Keyword(s):  
Real Time ◽  
Power Distribution ◽  
Control Strategies ◽  
Power Grid ◽  
Energy System ◽  
Hardware In The Loop ◽  
Distribution Grid ◽  
Compensation Strategy ◽  
Software Environment ◽  
The Real

With increasing changes in the contemporary energy system, it becomes essential to test the autonomous control strategies for distributed energy resources in a controlled environment to investigate power grid stability. Power hardware-in-the-loop (PHIL) concept is an efficient approach for such evaluations in which a virtually simulated power grid is interfaced to a real hardware device. This strongly coupled software-hardware system introduces obstacles that need attention for smooth operation of the laboratory setup to validate robust control algorithms for decentralized grids. This paper presents a novel methodology and its implementation to develop a test-bench for a real-time PHIL simulation of a typical power distribution grid to study the dynamic behavior of the real power components in connection with the simulated grid. The application of hybrid simulation in a single software environment is realized to model the power grid which obviates the need to simulate the complete grid with a lower discretized sample-time. As an outcome, an environment is established interconnecting the virtual model to the real-world devices. The inaccuracies linked to the power components are examined at length and consequently a suitable compensation strategy is devised to improve the performance of the hardware under test (HUT). Finally, the compensation strategy is also validated through a simulation scenario.

scholarly journals Discriminating the eight genotypes of the porcine circovirus type 2 with TaqMan-based real-time PCR

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Ellen Kathrin Link ◽  
Matthias Eddicks ◽  
Liangliang Nan ◽  
Mathias Ritzmann ◽  
Gerd Sutter ◽  
...  
Keyword(s):  
Real Time ◽  
Real Time Pcr ◽  
Porcine Circovirus Type ◽  
Porcine Circovirus Type 2 ◽  
Diagnostic Sensitivity ◽  
Locked Nucleic Acid ◽  
Porcine Circovirus ◽  
Amplification Efficiency ◽  
Pcr Assays

Abstract Background The porcine circovirus type 2 (PCV2) is divided into eight genotypes including the previously described genotypes PCV2a to PCV2f and the two new genotypes PCV2g and PCV2h. PCV2 genotyping has become an important task in molecular epidemiology and to advance research on the prophylaxis and pathogenesis of PCV2 associated diseases. Standard genotyping of PCV2 is based on the sequencing of the viral genome or at least of the open reading frame 2. Although, the circovirus genome is small, classical sequencing is time consuming, expensive, less sensitive and less compatible with mass testing compared with modern real-time PCR assays. Here we report about a new PCV2 genotyping method using qPCR. Methods Based on the analysis of several hundred PCV2 full genome sequences, we identified PCV2 genotype specific sequences or single-nucleotide polymorphisms. We designed six TaqMan PCR assays that are specific for single genotypes PCV2a to PCV2f and two qPCRs targeting two genotypes simultaneously (PCV2g/PCV2d and PCV2h/PCV2c). To improve specific binding of oligonucleotide primers and TaqMan probes, we used locked nucleic acid technology. We evaluated amplification efficiency, diagnostic sensitivity and tested assay specificity for the respective genotypes. Results All eight PCV2 genotype specific qPCRs demonstrated appropriate amplification efficiencies between 91 and 97%. Testing samples from an epidemiological field study demonstrated a diagnostic sensitivity of the respective genotype specific qPCR that was comparable to a highly sensitive pan-PCV2 qPCR system. Genotype specificity of most qPCRs was excellent. Limited unspecific signals were obtained when a high viral load of PCV2b was tested with qPCRs targeting PCV2d or PCV2g. The same was true for the PCV2a specific qPCR when high copy numbers of PCV2d were tested. The qPCR targeting PCV2h/PCV2c showed some minor cross-reaction with PCV2d, PCV2f and PCV2g. Conclusion Genotyping of PCV2 is important for routine diagnosis as well as for epidemiological studies. The introduced genotyping qPCR system is ideal for mass testing and should be a valuable complement to PCV2 sequencing, especially in the case of simultaneous infections with multiple PCV2 genotypes, subclinically infected animals or research studies that require large sample numbers.

Sign in / Sign up

Export Citation Format

Share Document