scholarly journals Study of the Hydraulic Performance Parameters of the Drip Irrigation System at Various Operating Pressures

2020 ◽  
Author(s):  
Parth J. Kapupara ◽  
Hina M. Bhatu ◽  
Jay Gohel
Keyword(s):  
Performance Evaluation ◽  
Drip Irrigation ◽  
Irrigation System ◽  
High Water ◽  
Hydraulic Performance ◽  
Operating Pressure ◽  
Drip Irrigation System ◽  
Uniformity Coefficient ◽  
Pressure Discharge ◽  
American Society

Background: Drip irrigation system is one of the best water application methods that have been used in the world among the other irrigation methods because of its upright and high uniformity and high-water use efficiency. Hydraulic performance evaluation is widely accepted for the evaluation of overall uniformity of a drip irrigation system. Methods: In an experimental study carried out at School of Engineering, RK University, Rajkot; hydraulic performance evaluation parameters viz., Pressure discharge relationship, Christiansen’s uniformity coefficient (CU), manufacturing coefficient of variation (CVm) and emission uniformity (EU) of non-pressure compensating emitters were calculated for 2 lph inline and 2 lph, 4 lph, 8 lph online emitter at various operating pressure of 0.8, 0.9, 1.0, 1.1 and 1.2 kg/cm2 as per American Society of Agricultural and Biological Engineers (ASAE) standards. Result: The study concluded that rated discharge of the emitter can be obtained at the operating pressure of 1.0 kg/cm2. Pressure discharge relationship revealed that discharge of the emitter upsurges as pressure rises. CU and EU were more than 95% for all the cases and they were maximum at 1.0 kg/cm2. CVm was less than 0.0200 for all the cases and it was minimum at 1.0 kg/cm2. Study concludes that all the parameter viz., CU, EU and CVm were excellent and very good categories for all emitters as per American Society of Agricultural and Biological Engineers (ASAE) standards.

scholarly journals EVALUATION OF AN AUTOMATIC CONTROL SYSTEM WITH DRIP IRRIGATION SYSTEM SHOWING POOR HYDRAULIC PERFORMANCE

2020 ◽  
Vol 60 (1) ◽  
pp. 155-162
Author(s):  
Moataz Elnemr
Keyword(s):  
Soil Moisture ◽  
Control System ◽  
Drip Irrigation ◽  
Crop Production ◽  
Irrigation System ◽  
Hydraulic Performance ◽  
Cost Ratio ◽  
Drip Irrigation System ◽  
Benefit Cost Ratio ◽  
Benefit Cost

A field experiment was conducted with the purpose of testing and evaluating the use of a closed-loop, real-time control system which was developed by (Elnemr M.K., 2017) for application to a poor hydraulic performance drip irrigation system with sandy loam soil cultivated with cucumber crop. This control system collects soil moisture data through three sensors distributed along each third of the lateral. The control system was based on calculating the average soil moisture content (MC) of the three readings and using it as an indicator to start or stop irrigation process according to the requirements of the plant. The control system will start the pump after the depletion of allowed MC percentage of available water which is one of the required inputs to operate the control system. The irrigation process continues until reaching the field capacity (FC) value. The study compared two management methods for the irrigation system. First one was using the proposed control system (Aum) and the other one was manual operation based on calculating water requirement from climatic data (Clm). Using the proposed control system led to increase cucumber crop production by 23.8% of Clm productivity. The control system led to save water and seasonal irrigation time. This led to increase water productivity and energy use efficiency of Aum if compared to Clm by 41.71% and 110% respectively. Despite the added cost to the irrigation system because of the control system, the benefit/cost ratio for Aum was higher by 24.39% due to the decrease in energy and labour costs in addition to the increase in crop production. The study recommended using the researched control system with drip irrigation systems which show poor hydraulic performance to reduce negative effects on crop production and to reach more efficient use for both water and energy with keeping the opportunity to increase benefit/cost ratio. Further studies should be done on the system with drip irrigation system that work under acceptable ranges of hydraulic performance. Also, further studies should be done to investigate the most effective and suitable distribution of the sensors along lateral.

scholarly journals Hydraulic Performance Analysis of Drip Irrigation System Using Pressure Compensated Dripper at Low Operating Pressure

2021 ◽  
Author(s):  
Eddy Herman Sharu
Keyword(s):  
Drip Irrigation ◽  
Irrigation System ◽  
Low Pressure ◽  
Hydraulic Performance ◽  
Uniform Flow ◽  
Hydraulic Parameters ◽  
Operating Pressure ◽  
Drip Irrigation System ◽  
Flow Variation ◽  
Flow Rate Coefficient

Irrigation is the most important component in ensuring that crops can produce optimal yields. The use of drip irrigation can help farmers in providing water to crops in the amount required by the crop. Drip irrigation usually uses an uncompensated dripper and also a pressure compensated dripper. The use of an uncompensated dripper requires precise pressure to ensure a uniform flow for each dripper while the use of a pressure compensated dripper will also provide a uniform flow when operating pressure was used within the range specified by the dripper manufacturer. The purpose of this study is to evaluate the hydraulic performance of the drip irrigation system using low pressure compared to the minimum pressure recommended by dripper manufacturers. The pressure operation recommended by the manufacturer is 1.5-4 bars. This study uses pressures as low as 1 bar (low pressure), 2 bars, and 2.5 bars (recommended by manufacture) to operate this irrigation system. The volumetric approach was used to calculate each emitter's flow rate. Coefficient uniformity (CU), emission uniformity (EU), coefficient of variation (CV), and emitter flow variation (EFV) were the hydraulic parameters evaluated. The results show that CU, CV, and EU are in excellent classification, and the value for CU and the EU is more than 95 percent efficiency. The CV value is below 0.03 which is a very good classification. Meanwhile, emitter flow variation is 10% when operating at 2.5 bars and 2.0 bars and is considered the desirable classification. On the other hand, the emitter flow variation was reported at 6% for the 1 bar operating pressure and the classification was also recorded in the desirable classification. The results conclude that the use of low operating pressure compared to the minimum operating pressure proposed by the manufacturer can also operate in excellent condition according to the hydraulic parameters evaluated.

scholarly journals Hydraulic Performance and Modelling of Pressurized Drip Irrigation System

Water ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 2295
Author(s):  
Eddy Herman Sharu ◽  
Mohd Shahrizal Ab Razak
Keyword(s):  
Power Consumption ◽  
Drip Irrigation ◽  
Irrigation System ◽  
Hydraulic Performance ◽  
Mean Bias Error ◽  
Small Scale ◽  
Bias Error ◽  
Hydraulic Parameters ◽  
Operating Pressure ◽  
Drip Irrigation System

This study was conducted at Laman Sayur, Malaysia Agro Exposition Park Serdang (MAEPS), to investigate the hydraulic performance of a small-scale drip irrigation system. The modelling was carried out using EPANET software to understand how the drip irrigation system is operated. Model results show that the errors are small, i.e., 2.2% and 3.0% for pressures, and 1.7% for discharge in lateral pipe 1 and lateral pipe 2. The root mean square error (RMSE) and the mean bias error (MBE) for discharge were recorded at 0.04 L/h and 0.03 L/h for lateral pipe 1 and 0.04 L/h and 0.02 L/h for lateral pipe 2. RMSE and MBE for pressure were recorded at 0.61 m and 0.68 m for lateral pipe 1, and 0.79 m and 0.68 m for lateral pipe 2, respectively. These results show that the model yields good performance. For hydraulic performance, the field measurement was conducted with four operating pressures: P1 (15.3), P2 (20.4), P3 (25.5), and P4 (28.6) meters. The hydraulic parameters evaluated were the coefficient of uniformity (CU), the emission uniformity (EU), the coefficient of variation (CV), and the emitter flow variation (EFV). The operating pressure during the measurement is constant according to the specified pressure. The results show that CU, CV, and EU are in the excellent classification, and values of CU and EU have more than 95% efficiency. The value for CV is below 0.03, which is excellent. The EFV is 10% when operating at 25.5 m and 15.3 m and is considered desirable. On the other hand, for the 28.6 m and 15.3 m operating pressures, the EFV parameters were recorded at 13.6% and 10.29%, respectively, and are classified acceptable. This study concluded that the operating pressures, P2 (20.4 m) and P3 (25.5 m), were performed under excellent classification for all hydraulic parameters evaluated. Based on the outputs from the model, it is inferred that the existing drip irrigation system at Laman Sayur MAEPS is operated in an over-powered state. With the current pump power consumption, the irrigation system could be operated at a minimum of four times the capacity of the existing irrigation system. To reduce the power consumption, it is suggested that the system is operated at a lower pumping power. This would minimize the operating costs especially for the development of a new drip irrigation system that has the same capacity as the drip irrigation system that is currently being operated at Laman Sayur, MAEPS Serdang.

ESTIMATION OF CONSUMPTIVE USE OF POTATO CROP PIANTED UNDER DRIP IRRIGATION SYSTEM BY USING SWRT TECHNOLOGY

2020 ◽  
Vol 10 (1) ◽  
pp. 271-282
Author(s):  
J.N. Abedalrahman ◽  
R.J. Mansor ◽  
D.R. Abass
Keyword(s):  
Water Consumption ◽  
Drip Irrigation ◽  
Soil Depth ◽  
Irrigation System ◽  
Potato Crop ◽  
Block Design ◽  
Organic Fertilizer ◽  
Control Treatment ◽  
Drip Irrigation System ◽  
Spring Season

A field experiment was carried out in the field of the College of Agriculture / University of Wasit, located on longitude  45o   50o   33.5o   East and latitude 32o 29o 49.8o North, in Spring season of the agricultural season 2019, in order to estimate the water consumption of potato crop using SWRT technology and under the drip irrigation system. The experiment was designed according to Randomized Complete Block Design (RCBD) with three replications and four treatments that include of the SWRT treatment (the use of plastic films under the plant root area in an engineering style), and the treatment of vegetal fertilizer (using Petmos), organic fertilizer (sheep manure), and the control treatment . Potato tubers (Solanum tuberosum L.)  var. Burin was planted for spring season on 10/2/2019 at the soil depth of 5-10 cm. The highest reference water consumption for the potato crop during the season was calculated by Najeeb Kharufa, which was 663.03 mm. The highest actual water consumption for the potato crop during the season for the control treatment was 410.1 mm. The results showed increase in the values of the crop coefficient (Kc) in the stages of tubers formation and tubers filling stage as compared to the vegetative and ripening stages, ranged from 1.37-1.92 for the two stages of tubers formation and tubers filling. The SWRT treatment gave the highest water use efficiency during the season, was 3.46 kg m-3 .

Sign in / Sign up

Export Citation Format

Share Document