Source Material for Breeding Varieties of Red Clover for Different Ways to Use

2015 ◽  
pp. 63-78
Keyword(s):  
Red Clover ◽  
Source Material

DETERMINATION OF THE BASIC DESIGN AND TECHNOLOGICAL PARAMETERS OF THE PNEUMATIC SEPARATING DEVICE OF A CLOVER THRESHER AND SCARIFIER

2021 ◽  
pp. 9-13
Author(s):  
ALEKSANDR I. BURKOV ◽  
Keyword(s):  
Red Clover ◽  
Source Material ◽  
Basic Design ◽  
Technological Parameters ◽  
Maximum Throughput ◽  
Technical Requirements ◽  
Diffi Cult ◽  
Study Results ◽  
Processing Line ◽  
Light Impurities

The most labor-intensive stages of the post-harvest processing of grass seeds are their extracting and cleaning from impurities. For extracting seeds from the hull of clover and other leguminous and cereal grasses, as well as scarifi cation of solid seeds of leguminous grasses, the clover thresher and scarifi er KS-0.2 has been developed. It lacks a device for cleaning the extracted seeds from impurities, which makes it diffi cult to further clean them at subsequent stages of the processing line. To eliminate this disadvantage, a pneumatic separating device was fi tted for cleaning seeds from light impurities. The research aimed at experimental substantiation of the basic constructive and technological parameters of the pneumatic separating device of the clover thresher and scarifi er, ensuring cleaning from light impurities of more than 60%. The study was carried out according to conventional techniques using methods of planning a multi-factor experiment on a laboratory installation of a clover thresher when cleaning red clover seeds from light impurities. The study results have shown that the maximum eff ect of cleaning from light impurities reaches 96.7% with a minimum feed of source material of 200 kg/h, the angle of the grain board inclination of 42.85° and a maximum depth of the aspirating channel of 0.11 m. Based on design considerations and the maximum throughput of the clover thresher and scarifi er, the following combination of factors was chosen as the optimal one: a feed of the source material of 300 kg/h, an inclination angle of the grain board of 45° and a depth of the aspirating channel of 0.09 m. With this combination of factors, the eff ect of cleaning from light impurities meets the technical requirements and equals 75.2%. Thus, the study has determined the basic design and technological parameters of the pneumatic separating device of the clover thresher and scarifier.

Isoflavone profiles in different plant parts of red clover

Planta Medica ◽  
2011 ◽  
Vol 77 (12) ◽  
Author(s):  
M Bursac ◽  
M Atanackovic ◽  
J Cvejic ◽  
S Vasiljevic
Keyword(s):  
Red Clover ◽  
Plant Parts

Pasture species and cultivars used in New Zealand - a list

1999 ◽  
pp. 147-166 ◽  
Author(s):  
J.F.L. Charlton ◽  
A.V. Stewart
Keyword(s):  
New Zealand ◽  
Red Clover ◽  
Birdsfoot Trefoil ◽  
Reference List ◽  
Commercial Activity ◽  
Animal Products ◽  
Prairie Grass ◽  
Brome Grass ◽  
Industry Needs ◽  
Herb Species

In recent years, the number of pasture species and cultivars commercially available to farmers in New Zealand has increased significantly. Reasons for this include increased commercial activity in the development and supply of proprietary cultivars, and more specialisation in New Zealand's pastoral agriculture. In particular, pasture cultivars are increasingly marketed as proprietary products with associated technical support. This year there are 109 certified cultivars available, belonging to 23 grass, legume and herb species. As a result, farmers are now able to develop improved pasture feed supply, but they are somewhat confused about pasture species and cultivars, and this frustrates their aims to produce high quality animal products from productive pastures. Accordingly, the herbage seeds industry needs to work from a clear reference list, to avoid any confusion when supplying farmers and overseas clients with their seed requirements. Our list of pasture species, types and cultivars available within New Zealand aims to be that reference. Keywords: birdsfoot trefoil, brome grass, caucasian clover, chicory, clover, cocksfoot, cultivars, herbs, lotus, lucerne, pasture, phalaris, plantain, prairie grass, red clover, ryegrass, seeds, species, strawberry clover, sub clover, tall fescue, timothy, types, white clover, Yorkshire fog

NEW CLOVER CULTIVARS FOR WAIKATO DAIRY PASTURE: ESTABLISHMENT, PRODUCTION AND NITROGEN FIXATION DURING THE FIRST YEAR

1988 ◽  
pp. 207-211
Author(s):  
S.F. Ledgard ◽  
G.J. Brier ◽  
R.N. Watson
Keyword(s):  
Nitrogen Fixation ◽  
White Clover ◽  
Dairy Cow ◽  
Red Clover ◽  
First Year ◽  
Buried Seed

Clover cultivars grown with ryegrass were compared in an establishment year under dairy cow grazing. There was no difference in total annual productton but summer production was greater with Pawera red clover and with Kopu or Pitau white clovers. Clovers differed little in the proportion of nitrogen fixed, except during summer when values were highest for Pawera. Pawera was less prone to nematode attack than white clover cultivars but was more susceptible to clover rot. Resident clovers and high buried seed levels (e.g., 11-91 kg/ha) made introduction of new clover cultivars difficult. Sown clovers established best (50-70% of total clover plants) when drilled into soil treated with dicamba and glyphosate. Keywords: white clover, red clover, nematodes. nitrogen fixation, pasture renovation

BEHAVIOUR AND EFFECTIVENESS OF BEES IN POLLINATING LEGUMES

1974 ◽  
pp. 105-110
Author(s):  
I.W. Forster
Keyword(s):  
White Clover ◽  
Seed Set ◽  
Red Clover ◽  
Potential Maximum ◽  
Open Fields

One honeybee or bumblebee working on each square metre of white clover or red clover gave adequate pollination. This could be obtained with one hive of honeybees to each three hectares of flowering clover. Lucerne seeding averaged only 10% of the potential maximum in open fields with honey- or bumblebees. In cages where honeybees were forced to gather pollen, this was raised to 30% but it was not possible to increase seed set significantly in the fields.

A REVIEW OF 10 YEARS' RESEARCH WITH RED CLOVERS UNDER GRAZING IN SOUTHLAND

1989 ◽  
pp. 181-187
Author(s):  
R.J.M. Hay ◽  
D.L. Ryan
Keyword(s):  
Tall Fescue ◽  
Red Clover ◽  
Farming Systems ◽  
Seasonal Growth ◽  
Sheep Grazing ◽  
High Quality ◽  
Late Flowering ◽  
Heavy Weight ◽  
Widespread Acceptance ◽  
Summer Growth

In a series of trials at Grasslands Gore, over 10 years, the late-flowering tetraploid red clover 'Grassland Pawera' was more productive and persistent than other red clover cultivars. The strong summer growth of Pawera meets the need for heavy-weight lamb feed and high quality forage for conservation in intensive sheep farming systems in Southland. Lenient. infrequent defoliation is necessary to maximise DM production and persistence of Pawera. The most compatible of the grasses evaluated was 'Grasslands Roa' tall fescue. However, 'Grasslands Nui' ryegrass will still be the major grass sown with Pawera owing to its widespread acceptance. In ryegrass mixtures, sowing rates of 5-7 kg/ha of red clover were needed to optimise establishment and subsequent yield. Evidence of oestrogenic activity of Pewera to sheep prompted Grasslands Division to select within Pawera for a low formononetin cultivar. Keywords: red clover, Pawera. Hamua, Turoa. G21. G22, G27. oestrogenic activity, Nui ryegrass, Roa tall fescue, Maru phalaris. Southland, sheep grazing, frequency, intensity, quality. seasonal growth

THE PERFORMANCE OF 'GRASSLANDS MATUA' PRAIRIE GRASS IN THE SOUTHERN NORTH ISLAND

1977 ◽  
pp. 148-155
Author(s):  
G.J.Rys I.M. Ritchie ◽  
R.G. Smith ◽  
N.A. Thomson ◽  
G. Crouchley ◽  
W. Stiefel
Keyword(s):  
White Clover ◽  
Animal Health ◽  
Red Clover ◽  
Annual Production ◽  
Lower Yield ◽  
Prairie Grass

The performance of 'Grasslands Matua' prairie grass (Bromus catharticus) was compared with perennial ryegrasses under mowing or grazing in three trials conducted in the southern North Island. Production of Matua under mowing at Flock House and Waimate West was 13% and 19% greater than G.4708 and Nui ryegrass, respectively, with the extra production contributed in summer and winter. At Masterton no difference between Matua and Ariki ryegrass production occurred under grazing. A 31% increase in annual production was recorded for both Matua and G.4708 swards receiving N, compared with those sown with white clover, with the annual yield of G.4708 receiving N similar to Matua receiving no N. Less frequent defoliation increased production of Matua swards by 17% and the Matua component by 38%. Production of Nui in comparison with Matua swards was 14% lower under frequent and 9% lower under infrequent defoliation. Similar production was recorded from red clover under frequent, and infrequent defoliation for both Nui and Matua swards. A 48% lower yield of white clover occurred under infrequent defoliation of Matua swards. At Masterton a higher incidence of goitre in newborn lambs, accompanied by a 12% lower lamb liveweight at weaning, occurred on Matua- compared with Ariki-based swards. Aspects of seasonal production, fertility response, management, and animal health are discussed.

Genetic variation for rate of establishment in caucasian clover

1998 ◽  
pp. 213-217
Author(s):  
K.H. Widdup ◽  
T.L. Knight ◽  
C.J. Waters
Keyword(s):  
Genetic Variation ◽  
Root Growth ◽  
Seedling Growth ◽  
White Clover ◽  
Seedling Emergence ◽  
Red Clover ◽  
Dry Weight ◽  
Cool Season ◽  
Trifolium Ambiguum ◽  
Root Dry Weight

Slow establishment of caucasian clover (Trifolium ambiguum L.) is hindering the use of this legume in pasture mixtures. Improved genetic material is one strategy of correcting the problem. Newly harvested seed of hexaploid caucasian clover germplasm covering a range of origins, together with white and red clover and lucerne, were sown in 1 m rows in a Wakanui soil at Lincoln in November 1995. After 21 days, the caucasian clover material as a group had similar numbers of emerged seedlings as white clover and lucerne, but was inferior to red clover. There was wide variation among caucasian clover lines (48-70% seedling emergence), with the cool-season selection from cv. Monaro ranked the highest. Recurrent selection at low temperatures could be used to select material with improved rates of seedling emergence. Red clover and lucerne seedlings produced significantly greater shoot and root dry weight than caucasian and white clover seedlings. Initially, caucasian clover seedlings partitioned 1:1 shoot to root dry weight compared with 3:1 for white clover. After 2 months, caucasian clover seedlings had similar shoot growth but 3 times the root growth of white clover. Between 2 and 5 months, caucasian clover partitioned more to root and rhizome growth, resulting in a 0.3:1 shoot:root ratio compared with 2:1 for white clover. Both clover species had similar total dry weight after 5 months. Unhindered root/ rhizome devel-opment is very important to hasten the establishment phase of caucasian clover. The caucasian clover lines KZ3 and cool-season, both selections from Monaro, developed seedlings with greater shoot and root growth than cv. Monaro. KZ3 continued to produce greater root growth after 5 months, indicating the genetic potential for improvement in seedling growth rate. Different pasture estab-lishment techniques are proposed that take account of the seedling growth characteristics of caucasian clover. Keywords: establishment, genetic variation, growth, seedling emergence, Trifolium ambiguum

EVALUATION OF CLOVERS ON SANDY COASTAL SOIL

1977 ◽  
pp. 130-138 ◽  
Author(s):  
W.M. Williams ◽  
L.B. Anderson ◽  
B.M. Cooper
Keyword(s):  
New Zealand ◽  
Drought Stress ◽  
Sandy Soil ◽  
White Clover ◽  
Plant Material ◽  
Red Clover ◽  
Early Spring ◽  
Commercial Cultivars ◽  
Mediterranean Origin ◽  
Winter Annual

In evaluations of clover performances on summer-dry Himatangi sandy soil, it was found that none could match lucerne over summer. Emphasis was therefore placed on production in autumn-winter- early spring when lucerne growth was slow. Evaluations of some winter annual clover species suggested that Trifolium spumosum, T. pallidum, T. resupinatum, and T. vesiculosum would justify further investigation, along with T. subterraneum which is already used in pastures on this soil type. Among the perennial clover species, Kenya white clover (7'. semipilosum) showed outstanding recovery from drought and was the only species to produce significantly in autumn. However, it failed to grow in winter-early spring. Within red clover, materials of New Zealand x Moroccan origin substantially outproduced the commercial cultivars. Within white clover, material from Israel, Italy and Lebanon, as well as progeny of a selected New Zealand plant, showed more rapid recovery from drought stress and subsequently better winter growth than New Zealand commercial material ('Grasslands Huia'). The wider use of plant material of Mediterranean origin and of plants collected in New Zealand dryland pastures is advocated in development of clover cultivars for New Zealand dryland situations.

Sign in / Sign up

Export Citation Format

Share Document