Atmospheric pressure plasma polymerization of HMDSO on different textile fibres and their studies

2015 ◽  
pp. 85-110
Keyword(s):  
Atmospheric Pressure ◽  
Plasma Polymerization ◽  
Atmospheric Pressure Plasma ◽  
Textile Fibres ◽  
Pressure Plasma

scholarly journals Development of Organosilicon-Based Superhydrophobic Coatings through Atmospheric Pressure Plasma Polymerization of HMDSO in Nitrogen Plasma

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 219 ◽  
Author(s):  
Siavash Asadollahi ◽  
Jacopo Profili ◽  
Masoud Farzaneh ◽  
Luc Stafford
Keyword(s):  
Contact Angle ◽  
Atmospheric Pressure ◽  
Plasma Polymerization ◽  
Atmospheric Pressure Plasma ◽  
Plasma Jet ◽  
Nitrogen Plasma ◽  
Superhydrophobic Surfaces ◽  
Atmospheric Pressure Plasma Jet ◽  
Pressure Plasma ◽  
Superhydrophobic Coatings

Water-repellent surfaces, often referred to as superhydrophobic surfaces, have found numerous potential applications in several industries. However, the synthesis of stable superhydrophobic surfaces through economical and practical processes remains a challenge. In the present work, we report on the development of an organosilicon-based superhydrophobic coating using an atmospheric-pressure plasma jet with an emphasis on precursor fragmentation dynamics as a function of power and precursor flow rate. The plasma jet is initially modified with a quartz tube to limit the diffusion of oxygen from the ambient air into the discharge zone. Then, superhydrophobic coatings are developed on a pre-treated microporous aluminum-6061 substrate through plasma polymerization of HMDSO in the confined atmospheric pressure plasma jet operating in nitrogen plasma. All surfaces presented here are superhydrophobic with a static contact angle higher than 150° and contact angle hysteresis lower than 6°. It is shown that increasing the plasma power leads to a higher oxide content in the coating, which can be correlated to higher precursor fragmentation, thus reducing the hydrophobic behavior of the surface. Furthermore, increasing the precursor flow rate led to higher deposition and lower precursor fragmentation, leading to a more organic coating compared to other cases.

scholarly journals Atmospheric Pressure Plasma Polymerized 2-Ethyl-2-oxazoline Based Thin Films for Biomedical Purposes

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2679
Author(s):  
Věra Mazánková ◽  
Pavel Sťahel ◽  
Petra Matoušková ◽  
Antonín Brablec ◽  
Jan Čech ◽  
...  
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Atmospheric Pressure ◽  
Plasma Polymerization ◽  
Film Surface ◽  
Atmospheric Pressure Plasma ◽  
Bacterial Biofilm ◽  
Depth Sensing ◽  
Pressure Plasma ◽  
Highly Active

Polyoxazoline thin coatings were deposited on glass substrates using atmospheric pressure plasma polymerization from 2-ethyl-2-oxazoline vapours. The plasma polymerization was performed in dielectric barrier discharge burning in nitrogen at atmospheric pressure. The thin films stable in aqueous environments were obtained at the deposition with increased substrate temperature, which was changed from 20 ∘C to 150 ∘C. The thin film deposited samples were highly active against both S. aureus and E. coli strains in general. The chemical composition of polyoxazoline films was studied by FTIR and XPS, the mechanical properties of films were studied by depth sensing indentation technique and by scratch tests. The film surface properties were studied by AFM and by surface energy measurement. After tuning the deposition parameters (i.e., monomer flow rate and substrate temperature), stable films, which resist bacterial biofilm formation and have cell-repellent properties, were achieved. Such antibiofouling polyoxazoline thin films can have many potential biomedical applications.

Core-shell polypyrrole nanoparticles obtained by atmospheric pressure plasma polymerization

2014 ◽  
Vol 63 (12) ◽  
pp. 2023-2029 ◽  
Author(s):  
Miguelina Vasquez-Ortega ◽  
Mauricio Ortega ◽  
Juan Morales ◽  
M Guadalupe Olayo ◽  
Guillermo J Cruz ◽  
...  
Keyword(s):  
Atmospheric Pressure ◽  
Plasma Polymerization ◽  
Atmospheric Pressure Plasma ◽  
Core Shell ◽  
Pressure Plasma ◽  
Polypyrrole Nanoparticles
Sign in / Sign up

Export Citation Format

Share Document