Power Efficiency of Cooperative Transmission

2014 ◽  
pp. 81-96
Keyword(s):  
Power Efficiency ◽  
Cooperative Transmission

Effect of Shielding a Floating Electrode on the Power Efficiency of a Micro-plasma VUV Light Source

2015 ◽  
Vol 135 (3) ◽  
pp. 114-115 ◽  
Author(s):  
Ryoto Sato ◽  
Daisuke Yasumatsu ◽  
Shinya Kumagai ◽  
Masaru Hori ◽  
Minoru Sasaki
Keyword(s):  
Light Source ◽  
Power Efficiency ◽  
Floating Electrode

EXPERIMENTAL AND ANALYTICAL STUDIES OF VERTICAL AXIS WIND TURBINES

2018 ◽  
pp. 51-58
Author(s):  
B. P. Khozyainov
Keyword(s):  
Wind Turbine ◽  
Flow Velocity ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Efficiency ◽  
Air Flow ◽  
Geometrical Parameters ◽  
Wind Speeds ◽  
Analytical Studies ◽  
Air Flow Velocity

The article carries out the experimental and analytical studies of three-blade wind power installation and gives the technique for measurements of angular rate of wind turbine rotation depending on the wind speeds, the rotating moment and its power. We have made the comparison of the calculation results according to the formulas offered with the indicators of the wind turbine tests executed in natural conditions. The tests were carried out at wind speeds from 0.709 m/s to 6.427 m/s. The wind power efficiency (WPE) for ideal traditional installation is known to be 0.45. According to the analytical calculations, wind power efficiency of the wind turbine with 3-bladed and 6 wind guide screens at wind speedsfrom 0.709 to 6.427 is equal to 0.317, and in the range of speed from 0.709 to 4.5 m/s – 0.351, but the experimental coefficient is much higher. The analysis of WPE variations shows that the work with the wind guide screens at insignificant average air flow velocity during the set period of time appears to be more effective, than the work without them. If the air flow velocity increases, the wind power efficiency gradually decreases. Such a good fit between experimental data and analytical calculations is confirmed by comparison of F-test design criterion with its tabular values. In the design of wind turbines, it allows determining the wind turbine power, setting the geometrical parameters and mass of all details for their efficient performance.

A Per-User QoS Enhancement Strategy via Downlink Cooperative Transmission Using Distributed Antennas

2010 ◽  
Vol E93-B (12) ◽  
pp. 3538-3541
Author(s):  
Byungseok LEE ◽  
Ju Wook JANG ◽  
Sang-Gyu PARK ◽  
Wonjin SUNG
Keyword(s):  
Cooperative Transmission ◽  
Distributed Antennas

TRIPLEPR-MAC: A Triple Queue Priority Based Medium Access Control Protocol for Wireless Sensor Network

2019 ◽  
Vol 09 ◽  
Author(s):  
Rinkuben N. Patel ◽  
Nirav V. Bhatt
Keyword(s):  
Sensor Network ◽  
Data Transmission ◽  
Energy Efficient ◽  
Power Efficiency ◽  
Mac Protocol ◽  
Medium Access Control Protocol ◽  
Quality Factors ◽  
Medium Access ◽  
Critical Fields ◽  
Storage Unit

Background: WSN is a network of smart tiny electromechanical devices named as sensors. Sensors perform various tasks like sensing the environment as per its range, transmit the data using transmission units, store the data in the storage unit and perform an action based on captured data. As they are installed in an unfriendly environment, to recharge the sensors are not possible every time which leads to a limited lifetime of a network. To enhance the life of a sensor network, the network required energy-efficient protocols. Various energy-efficient MAC protocols are developed by Research community, but very few of them are integrated with the priority-based environment which performs the priority-based data transmission. Another challenge of WSN is, most of the WSN areas are delay-sensitive because it is implemented in critical fields like military, disaster management, and health monitoring. Energy, Delay, and throughput are major quality factors that affect the sensor network. Objective: In this paper, the aim is to design and develop a MAC Protocol for a field like the military where the system requires energy efficiency and priority-based data transmission. Method: In the proposed model, the cluster-based network with priority queues are formed that can achieve higher power efficiency and less delay for sensitive data. Results: In this research simulation of Proposed MAC, TMAC and SMAC are done with different numbers of nodes, same inter-packet intervals, and variant inter-packet intervals. Based on the script simulation, result graphs are generated. Conclusion: The proposed work achieves greater lifetime compared to TMAC and SMAC using priority-based data transmission.

Multiple Access using Time Modulated Array with Single RF Chain

2019 ◽  
Vol 12 (5) ◽  
pp. 395-401
Author(s):  
Xu He ◽  
Yuan Ding ◽  
Gaojian Huang
Keyword(s):  
Power Efficiency ◽  
Multiple Access ◽  
Narrow Band ◽  
Average Power ◽  
Access Technology ◽  
Signal Peak ◽  
Single Radio ◽  
Rf Chain ◽  
Synthesis Approach ◽  
Single Rf Chain

Background: A new wireless multiple access technology enabled by using Time Modulated Arrays (TMAs) is proposed in this paper. Methods: It benefits due to the requirement of only a single Radio Frequency (RF) chain, compared with other multiple-RF-chain schemes. Results: As a result, it is able to greatly reduce the system cost, energy consumption, and complexity. Conclusion: In addition, the signal through the single RF chain is narrow-band modulated, reducing the signal Peak-to-Average-Power-Ratio (PAPR), thus, further enhancing the power efficiency of the RF chain, especially for power amplifiers. The operation principle and synthesis approach are elaborated in this paper, and are demonstrated with two examples.

Design Technique of High Power Efficiency LLC DC-DC Converters for Photovoltaic Cells

2018 ◽  
Vol 2 (1) ◽  
pp. 30
Author(s):  
Hisatsugu Kato ◽  
Yoichi Ishizuka ◽  
Kohei Ueda ◽  
Shotaro Karasuyama ◽  
Atsushi Ogasahara
Keyword(s):  
High Power ◽  
Power Efficiency ◽  
Photovoltaic Cells ◽  
Input Voltage ◽  
Design Technique ◽  
Load Range ◽  
Voltage Range ◽  
Simulation Results ◽  
Secondary Side ◽  
High Power Efficiency

This paper proposes a design technique of high power efficiency LLC DC-DC Converters for Photovoltaic Cells. The secondary side circuit and transformer fabrication of proposed circuit are optimized for overcoming the disadvantage of limited input voltage range and, realizing high power efficiency over a wide load range of LLC DC-DC converters. The optimized technique is described with theoretically and with simulation results. Some experimental results have been obtained with the prototype circuit designed for the 80 - 400 V input voltage range. The maximum power efficiency is 98 %.

Sign in / Sign up

Export Citation Format

Share Document