Loading mechanism of extraction mine working in front of a stoping face

2014 ◽  
pp. 25-30
Keyword(s):  
Mine Working

Engineering aspects of the mine working development in difficult hydrogeological conditions

2019 ◽  
pp. 132-141
Author(s):  
V.G. Hrinov ◽  
◽  
A.A. Khorolskyi ◽  
Yu.O. Vynohradov ◽  
◽  
...  
Keyword(s):  
Mine Working ◽  
Hydrogeological Conditions

scholarly journals Interference Mitigation for Visible Light Communications in Underground Mines Using Angle Diversity Receivers

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 367 ◽  
Author(s):  
Pablo Palacios Játiva ◽  
Milton Román Cañizares ◽  
Cesar A. Azurdia-Meza ◽  
David Zabala-Blanco ◽  
Ali Dehghan Firoozabadi ◽  
...  
Keyword(s):  
Visible Light ◽  
Mine Working ◽  
Channel Model ◽  
Underground Mining ◽  
Cumulative Distribution ◽  
Line Of Sight ◽  
Delay Spread ◽  
Noise Power ◽  
Working Face ◽  
Angle Diversity

This paper proposes two solutions based on angle diversity receivers (ADRs) to mitigate inter-cell interference (ICI) in underground mining visible light communication (VLC) systems, one of them is a novel approach. A realistic VLC system based on two underground mining scenarios, termed as mining roadway and mine working face, is developed and modeled. A channel model based on the direct component in line-of-sight (LoS) and reflections of non-line-of-sight (NLoS) links is considered, as well as thermal and shot noises. The design and mathematical models of a pyramid distribution and a new hemi-dodecahedral distribution are addressed in detail. The performances of these approaches, accompanied by signal combining schemes, are evaluated with the baseline of a single photo-diode in reception. Results show that the minimum lighting standards established in both scenarios are met. As expected, the root-mean-square delay spread decreases as the distance between the transmitters and receivers increases. Furthermore, the hemi-dodecahedron ADR in conjunction with the maximum ratio combining (MRC) scheme, presents the best performance in the evaluated VLC system, with a maximum user data rate of 250 Mbps in mining roadway and 120 Mbps in mine working face, received energy per bit/noise power of 32 dB and 23 dB, respectively, when the bit error rate corresponds to 10 − 4 , and finally, values of 120 dB in mining roadway and 118 dB in mine working face for signal-to-interference-plus-noise ratio are observed in a cumulative distribution function.

Photomechanical investigation of the stress—Strain state of a precast-block support in a mine working

1980 ◽  
Vol 16 (1) ◽  
pp. 6-10
Author(s):  
V. F. Trumbachev ◽  
O. K. Slavin ◽  
G. K. Kuchuashvili
Keyword(s):  
Mine Working ◽  
Strain State ◽  
Stress Strain ◽  
Stress Strain State

scholarly journals "STRESS CONDITION OF ROCK MASS AND FAULTING CALCULATION IN THE MINE WORKING"

2019 ◽  
Vol 134 (4) ◽  
pp. 17-22
Author(s):  
Alexandr E. Klykov ◽  
◽  
Efim S. Klykov ◽  
Georgiy V. Shirokolobov ◽  
◽  
...  
Keyword(s):  
Rock Mass ◽  
Mine Working ◽  
Stress Condition

scholarly journals Geomechanics of overworked mine working support resistance in the laminal massif of soft rocks

2020 ◽  
Vol 201 ◽  
pp. 01003
Author(s):  
Iryna Kovalevska ◽  
Hennadii Symanovych ◽  
Jacek Jarosz ◽  
Mykhailo Barabash ◽  
Oleksandr Husiev
Keyword(s):  
Mine Working ◽  
Computational Experiment ◽  
Strain State ◽  
The Finite Element Method ◽  
Mining Operations ◽  
Soft Rocks ◽  
Second Stage ◽  
Support Resistance ◽  
Complicating Factors ◽  
Water Cut

The relevant issues of ensuring trouble-free mining operations on the underlying horizons, which are partially or fully overworked are studied in this paper. The problem has been solved using the example of a laminal massif of the Western Donbas soft rocks; complicating factors were taken into account: water-cut, fracturing, and the rheological properties manifestation. The model, proposed for calculation, has been substantiated in view of geomechanics, as well as the finite element method has been chosen to obtain the stress-strain state of the adjacent massif and support. At the first stage, mine observations of the state of mine working planned for overworking have been conducted and analysed. At the second stage, a computational experiment has been conducted in the most difficult areas. The stresses fields have been analysed according to vertical, horizontal and stresses intensity components of the soft rocks laminal massif, as well as their distribution curves for the recommended and basic fastening options. It has been proved that the recommended parameters of the fastening structure provide repair-free mine working maintenance for the entire exploitation period with account of overworking. Recommendations have been developed for mining the seam C6 in M.I. Stashkova Mine, DTEK Pavlohradvuhillia PJSC.

Sign in / Sign up

Export Citation Format

Share Document