Hypercircle Bounds for Trefftz Elements. The Swansea Plate Triangle with Its Dual and Its Plane Stress Analog as an Example

2016 ◽  
pp. 409-416
Keyword(s):  
Plane Stress

Computing cell tractions from particle displacements on silicone rubber substrata

1994 ◽  
Vol 52 ◽  
pp. 162-163
Author(s):  
Tim Oliver ◽  
Akira Ishihara ◽  
Ken Jacobsen ◽  
Micah Dembo
Keyword(s):  
Plane Stress ◽  
Linear Elasticity ◽  
Silicone Rubber ◽  
Mathematical Analysis ◽  
Elastic Recovery ◽  
Video Images ◽  
Cell Traction Forces ◽  
Latex Beads ◽  
Cell Traction ◽  
Better Than

In order to better understand the distribution of cell traction forces generated by rapidly locomoting cells, we have applied a mathematical analysis to our modified silicone rubber traction assay, based on the plane stress Green’s function of linear elasticity. To achieve this, we made crosslinked silicone rubber films into which we incorporated many more latex beads than previously possible (Figs. 1 and 6), using a modified airbrush. These films could be deformed by fish keratocytes, were virtually drift-free, and showed better than a 90% elastic recovery to micromanipulation (data not shown). Video images of cells locomoting on these films were recorded. From a pair of images representing the undisturbed and stressed states of the film, we recorded the cell’s outline and the associated displacements of bead centroids using Image-1 (Fig. 1). Next, using our own software, a mesh of quadrilaterals was plotted (Fig. 2) to represent the cell outline and to superimpose on the outline a traction density distribution. The net displacement of each bead in the film was calculated from centroid data and displayed with the mesh outline (Fig. 3).

Improved Compliance Solutions for C(T), SE(B) and Clamped SE(T) Specimens Including Side-Grooves, Varying Thicknesses and 3-D Effects

2014 ◽  
Author(s):  
Gustavo Henrique B. Donato ◽  
Felipe Cavalheiro Moreira
Keyword(s):  
Crack Growth ◽  
Plane Strain ◽  
Plane Stress ◽  
Potential Drop ◽  
Crack Size ◽  
Growth Conditions ◽  
Size Estimation ◽  
Unloading Compliance ◽  
Integrity Assessments ◽  
Elastic Unloading

Fracture toughness and Fatigue Crack Growth (FCG) experimental data represent the basis for accurate designs and integrity assessments of components containing crack-like defects. Considering ductile and high toughness structural materials, crack growing curves (e.g. J-R curves) and FCG data (in terms of da/dN vs. ΔK or ΔJ) assumed paramount relevance since characterize, respectively, ductile fracture and cyclic crack growth conditions. In common, these two types of mechanical properties severely depend on real-time and precise crack size estimations during laboratory testing. Optical, electric potential drop or (most commonly) elastic unloading compliance (C) techniques can be employed. In the latter method, crack size estimation derives from C using a dimensionless parameter (μ) which incorporates specimen’s thickness (B), elasticity (E) and compliance itself. Plane stress and plane strain solutions for μ are available in several standards regarding C(T), SE(B) and M(T) specimens, among others. Current challenges include: i) real specimens are in neither plane stress nor plane strain - modulus vary between E (plane stress) and E/(1-ν2) (plane strain), revealing effects of thickness and 3-D configurations; ii) furthermore, side-grooves affect specimen’s stiffness, leading to an “effective thickness”. Previous results from current authors revealed deviations larger than 10% in crack size estimations following existing practices, especially for shallow cracks and side-grooved samples. In addition, compliance solutions for the emerging clamped SE(T) specimens are not yet standardized. As a step in this direction, this work investigates 3-D, thickness and side-groove effects on compliance solutions applicable to C(T), SE(B) and clamped SE(T) specimens. Refined 3-D elastic FE-models provide Load-CMOD evolutions. The analysis matrix includes crack depths between a/W=0.1 and a/W=0.7 and varying thicknesses (W/B = 4, W/B = 2 and W/B = 1). Side-grooves of 5%, 10% and 20% are also considered. The results include compliance solutions incorporating all aforementioned effects to provide accurate crack size estimation during laboratory fracture and FCG testing. All proposals revealed reduced deviations if compared to existing solutions.

scholarly journals A Study of Yielding and Plasticity of Rapid Prototyped ABS

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1495
Author(s):  
Dan-Andrei Șerban ◽  
Cosmin Marșavina ◽  
Alexandru Viorel Coșa ◽  
George Belgiu ◽  
Radu Negru
Keyword(s):  
Experimental Data ◽  
Stress State ◽  
Plastic Flow ◽  
Plane Stress ◽  
Yield Criterion ◽  
Numerical Analyses ◽  
Flow Potential ◽  
Stress States ◽  
State Configuration

In this article, the yielding and plastic flow of a rapid-prototyped ABS compound was investigated for various plane stress states. The experimental procedures consisted of multiaxial tests performed on an Arcan device on specimens manufactured through photopolymerization. Numerical analyses were employed in order to determine the yield points for each stress state configuration. The results were used for the calibration of the Hosford yield criterion and flow potential. Numerical analyses performed on identical specimen models and test configurations yielded results that are in accordance with the experimental data.

The Exact One-Dimensional Theory for End-Loaded Fully Anisotropic Beams of Narrow Rectangular Cross Section

2001 ◽  
Vol 68 (6) ◽  
pp. 865-868 ◽  
Author(s):  
P. Ladeve`ze ◽  
J. G. Simmonds
Keyword(s):  
Cross Section ◽  
Plane Stress ◽  
Rectangular Cross Section ◽  
Dimensional Theory ◽  
Explicit Formulas ◽  
Cross Sectional ◽  
Rectangular Shape ◽  
One Dimensional ◽  
Anisotropic Elastic ◽  
Derivatives Of

The exact theory of linearly elastic beams developed by Ladeve`ze and Ladeve`ze and Simmonds is illustrated using the equations of plane stress for a fully anisotropic elastic body of rectangular shape. Explicit formulas are given for the cross-sectional material operators that appear in the special Saint-Venant solutions of Ladeve`ze and Simmonds and in the overall beamlike stress-strain relations between forces and a moment (the generalized stress) and derivatives of certain one-dimensional displacements and a rotation (the generalized displacement). A new definition is proposed for built-in boundary conditions in which the generalized displacement vanishes rather than pointwise displacements or geometric averages.

Investigation of the impact of externally applied out-of-plane stress on Ferroelectric FET

2021 ◽  
pp. 1-1
Author(s):  
Yefan Liu ◽  
Sergiu Clima ◽  
Gaspard Hiblot ◽  
Philippe Matagne ◽  
Mihaela Loana Popovici ◽  
...  
Keyword(s):  
Plane Stress ◽  
Out Of Plane ◽  
The Impact
Sign in / Sign up

Export Citation Format

Share Document