The mathematical model of plant diseases and insect pests and the relationship between the crop growth

2014 ◽  
pp. 1231-1233
Author(s):  
Qiang Zhang
Keyword(s):  
Mathematical Model ◽  
Insect Pests ◽  
Crop Growth ◽  
Plant Diseases ◽  
The Mathematical Model ◽  
The Relationship

Temperature Influence on Performance of Oxidation Ponds

1991 ◽  
Vol 24 (5) ◽  
pp. 85-96 ◽  
Author(s):  
Qingliang Zhao ◽  
Zijie Zhang
Keyword(s):  
Mathematical Model ◽  
Temperature Influence ◽  
Field Scale ◽  
Experiment Data ◽  
Computer Technique ◽  
Oxidation Pond ◽  
Optimum Model ◽  
Oxidation Ponds ◽  
The Mathematical Model ◽  
The Relationship

By means of simulated tests of a laboratory–scale oxidation pond model, the relationship between BOD5 and temperature fluctuation was researched. Mathematical modelling for the pond's performance and K1determination were systematically described. The calculation of T–K1–CeCe/Ci) was complex but the problem was solved by utilizing computer technique in the paper, and the mathematical model which could best simulate experiment data was developed. On the basis of experiment results,the concept of plug–ratio–coefficient is also presented. Finally the optimum model recommended here was verified with the field–scale pond data.

scholarly journals METHODS OF FORMULATING AND SOLVING OPTIMIZATION PROBLEMS OF CUTTING LOGS OF LARGE SIZE BY BAR-SAWING METHOD WITH CUTTING OUT ONE BAR AND FIVE PAIRS OF SIDE EDGING BOARDS WITH SUBSEQUENT SAWING LUMBER FOR EDGED BOARDS

2017 ◽  
Vol 7 (1) ◽  
pp. 137-150
Author(s):  
Агапов ◽  
Aleksandr Agapov
Keyword(s):  
Mathematical Model ◽  
Objective Function ◽  
Optimization Problem ◽  
Optimization Problems ◽  
Target Function ◽  
Cross Sectional ◽  
Optimization Task ◽  
Cutting Out ◽  
The Mathematical Model ◽  
The Relationship

For the first time the mathematical model of task optimization for this scheme of cutting logs, including the objective function and six equations of connection. The article discusses Pythagorean area of the logs. Therefore, the target function is represented as the sum of the cross-sectional areas of edging boards. Equation of the relationship represents the relationship of the diameter of the logs in the vertex end with the size of the resulting edging boards. This relationship is described through the use of the Pythagorean Theorem. Such a representation of the mathematical model of optimization task is considered a classic one. However, the solution of this mathematical model by the classic method is proved to be problematic. For the solution of the mathematical model we used the method of Lagrange multipliers. Solution algorithm to determine the optimal dimensions of the beams and side edging boards taking into account the width of cut is suggested. Using a numerical method, optimal dimensions of the beams and planks are determined, in which the objective function takes the maximum value. It turned out that with the increase of the width of the cut, thickness of the beam increases and the dimensions of the side edging boards reduce. Dimensions of the extreme side planks to increase the width of cut is reduced to a greater extent than the side boards, which are located closer to the center of the log. The algorithm for solving the optimization problem is recommended to use for calculation and preparation of sawing schedule in the design and operation of sawmill lines for timber production. When using the proposed algorithm for solving the optimization problem the output of lumber can be increased to 3-5 %.

Walking Stability Analysis of Multi-Legged Crablike Robot over Slope

2013 ◽  
Vol 572 ◽  
pp. 636-639
Author(s):  
Xi Chen ◽  
Gang Wang
Keyword(s):  
Mathematical Model ◽  
Stability Analysis ◽  
Stability Criterion ◽  
Stability Margin ◽  
Static Stability ◽  
Matlab Simulation ◽  
And Performance ◽  
The Stability ◽  
The Mathematical Model ◽  
The Relationship

This paper deals with the walking stability analysis of a multi-legged crablike robot over slope using normalized energy stability margin (NESM) method in order to develop a common stabilization description method and achieve robust locomotion for the robot over rough terrains. The robot is simplified with its static stability being described by NESM. The mathematical model of static stability margin is built so as to carry out the simulation of walking stability over slope for the crablike robot that walks in double tetrapod gait. As a consequence, the relationship between stability margin and the height of the robots centroid, as well as its inclination relative to the ground is calculated by the stability criterion. The success and performance of the stability criterion proposed is verified through MATLAB simulation and real-world experiments using multi-legged crablike robot.

Design and Implementation of Digital Asthma Diagnosis System

2019 ◽  
Vol 14 (3) ◽  
pp. 1-15
Author(s):  
Qinghua Yao ◽  
Xiantao Yang
Keyword(s):  
Mathematical Model ◽  
Mutation Rate ◽  
Forced Expiratory Volume ◽  
Digital Signals ◽  
Respiratory Parameters ◽  
The Mathematical Model ◽  
The Relationship ◽  
Objective Indicators ◽  
Signal Conditioning Circuit

In this article, the MSP430F149 is the microcontroller (MCU), and a pressure sensor, MPX5100AP, is used to measure body measurement of maximal forced expiratory volume (FEV) and peak expiratory flow rate (PEFR). The two analog signals are processed by the signal conditioning circuit, and then the corresponding digital signals are acquired by the MCU. With the related operations of multiple respiratory parameters, a built-up time of respiration signal mutation rate values and the determination of the mutation rate, a mathematical model is built among FEV, PEFR and the rate of variation. The mathematical model of the system is analyzed, and the relationship between the detection results and the degree of airway obstruction is established. Finally, the patient's condition analysis results are given directly on the LCD, which provided the objective indicators for the medical treatment of the disease.

scholarly journals Modeling and Optimization of Bidirectional Clamping Forces in Drilling of Stacked Aluminum Alloy Plates

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2866
Author(s):  
Jintong Liu ◽  
Anan Zhao ◽  
Piao Wan ◽  
Huiyue Dong ◽  
Yunbo Bi
Keyword(s):  
Mathematical Model ◽  
Finite Element ◽  
Aluminum Alloy ◽  
Clamping Force ◽  
Practical Application ◽  
Element Simulation ◽  
Theory Of Plates ◽  
Plates And Shells ◽  
The Mathematical Model ◽  
The Relationship

Interlayer burrs formation during drilling of stacked plates is a common problem in the field of aircraft assembly. Burrs elimination requires extra deburring operations which is time-consuming and costly. An effective way to inhibit interlayer burrs is to reduce the interlayer gap by preloading clamping force. In this paper, based on the theory of plates and shells, a mathematical model of interlayer gap with bidirectional clamping forces was established. The relationship between the upper and lower clamping forces was investigated when the interlayer gap reaches zero. The optimization of the bidirectional clamping forces was performed to reduce the degree and non-uniformity of the deflections of the stacked plates. Then, the finite element simulation was conducted to verify the mathematical model. Finally, drilling experiments were carried out on 2024-T3 aluminum alloy stacked plates based on the dual-machine-based automatic drilling and riveting system. The experimental results show that the optimized bidirectional clamping forces can significantly reduce the burr heights. The work in this paper enables us to understand the effect of bidirectional clamping forces on the interlayer gap and paves the way for the practical application.

Effects of Powders on the Precision of a Powder Metallurgy Helical Gear

2007 ◽  
Author(s):  
Ming-Ta Yu ◽  
Chung-Biau Tsay
Keyword(s):  
Mathematical Model ◽  
Powder Metallurgy ◽  
Helical Gear ◽  
Precision Measurements ◽  
Manufacture Process ◽  
Measurement Results ◽  
Surface Deviations ◽  
Two Parameters ◽  
The Mathematical Model ◽  
The Relationship

This study refers to the conditions of practical powder metallurgy manufacture process, and proceeds to experiments and gear precision measurements as well as investigation on the effects of two parameters, powders and pitch circle radius, on gear precision. The relationship between gear parameters and gear surface deviations was derived from the mathematical model of the involute helical gear and the analysis of gear surface deviations. In accordance with the measurement results of experiments, an ideal correction on the parameters of a forming die is obtained from the computer simulations of gear surface deviations.

Study on High Frequency Hydraulic Exciter Based on Rotary Valve Control

2012 ◽  
Vol 490-495 ◽  
pp. 1441-1445 ◽  
Author(s):  
Jian Zhuo Zhang ◽  
Li Zhe Guan ◽  
Kang Kang Li
Keyword(s):  
Mathematical Model ◽  
High Frequency ◽  
Rotary Valve ◽  
Exciting Frequency ◽  
Working Principle ◽  
Relationship Of ◽  
The Mathematical Model ◽  
The Relationship ◽  
Valve Control

A kind of hydraulic exciter based on rotary valve control was studied in this paper, the composition of the exciter and its working principle were introduced, and the mathematical model of the system was established. The characters of the system were simulated using MATLAB. From the results of the simulation, we get the relationship of the amplitude of Vibration oil cylinder between the system’s pressure and the exciting frequency. The results can provide theoretical bases to design the hydraulic exciter.

Control Design of Foreign Fibers Detecting System Paving Mechanism

2013 ◽  
Vol 846-847 ◽  
pp. 228-232
Author(s):  
Hua Qing Wang ◽  
Jian Cheng Yang ◽  
Kai Yang ◽  
Jian Feng Qin ◽  
Ze Xu Zhou ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Control System ◽  
Control Design ◽  
Line Speed ◽  
On Line ◽  
Working Principle ◽  
The Mathematical Model ◽  
The Relationship

In this paper the working principle of cotton foreign fibers detecting and clearing on line device paving and loosing part is described, and the mathematical model of the relationship between line speed is established, and paving part control system that is suitable for this device has been designed on this basis.

Shaping Law and Motion Design in NC-ECM under Effect of Twiste Angle

2011 ◽  
Vol 128-129 ◽  
pp. 1010-1014
Author(s):  
Rui Wu ◽  
Dan Wen Zhang ◽  
Juan Sun
Keyword(s):  
Mathematical Model ◽  
Electrochemical Machining ◽  
Experimental Results ◽  
Working Face ◽  
Relationship Of ◽  
The Mathematical Model ◽  
The Relationship ◽  
Motion Design

The twiste angle has a great effect on shaping law and stability of Numerical Controlled Electrochemical Machining (NC-ECM) process. In order to avoid the disadvantages caused by twiste angle, a methode of study shaping law by dispersing cathode working face in NC-ECM was proposed, and a mathematical model of the shaping law with the effects of twiste angle has been established in this paper. The mathematical model disclosed the relationship of twiste angle β, feeding velocity vf and thickness of removal material h in NC-ECM. Theoretical and experimental results show the the mathematical model of shaping law described in this paper can be considered as a useful reference and is helpful for the analysis of the NC-ECM and general ECM process.

Sign in / Sign up

Export Citation Format

Share Document