Efficient finite element models of laminated glass subjected to low-velocity impact

2014 ◽  
pp. 499-506
Author(s):  
I Ivanov ◽  
T Sadowski
Keyword(s):  
Finite Element ◽  
Low Velocity Impact ◽  
Laminated Glass ◽  
Finite Element Models ◽  
Low Velocity ◽  
Velocity Impact

Influence of low-velocity impact-induced delamination on electrical resistance in carbon fiber-reinforced composite laminates

2018 ◽  
Vol 52 (25) ◽  
pp. 3461-3470 ◽  
Author(s):  
Robert J Hart ◽  
OI Zhupanska
Keyword(s):  
Finite Element ◽  
Carbon Fiber ◽  
Electrical Resistance ◽  
Low Velocity Impact ◽  
Finite Element Models ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Velocity Impact ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

In this paper, experiments have been performed and finite element models have been developed for studying the influence of low-velocity impact damage on the four-probe electrical resistance of carbon fiber-reinforced polymer matrix laminates. Sixteen-ply and 32-ply AS4/3501-6 laminates with quasi-isotropic layup were analyzed. Electrical resistance was evaluated using a four-step procedure. First, finite element models were created in Abaqus Finite Element Analysis (FEA) for simulating low-velocity impact using a quasi-static loading approach. Second, matrix rupture in the inside plies was evaluated, and delamination analysis was performed at the corresponding interfaces to determine delamination patterns. Third, four-probe electrical finite element models were developed in Abaqus FEA for specimens before and after impact using the concept of effective conducting thickness and the delamination patterns obtained from the delamination analysis. Effects of the low-velocity impact delamination on four-probe top and oblique electrical resistance were studied. Electrical resistance predictions were compared to the experimental data. Both top and oblique resistance planes were sensitive to presence of delamination with the oblique resistance measurement being more sensitive as compared to the top resistance measurement. In addition, the resistance of the 16-ply specimens was more greatly affected by the delamination compared to the 32-ply specimens. The proposed analysis can be utilized for design of carbon fiber-reinforced polymer matrix composites with optimized damage sensing capabilities.

Low-velocity impact properties and finite element analysis of syntactic foam reinforced by warp-knitted spacer fabric

2016 ◽  
Vol 87 (16) ◽  
pp. 1938-1952 ◽  
Author(s):  
Chao Zhi ◽  
Hairu Long ◽  
Fengxin Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Syntactic Foam ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Element Analysis ◽  
Velocity Impact ◽  
Impact Performance ◽  
Spacer Fabric ◽  
The Impact

The aim of this research was to investigate the low-velocity impact properties of syntactic foam reinforced by warp-knitted spacer fabric (SF-WKSF). In order to discuss the effect of warp-knitted spacer fabric (WKSF) and hollow glass microballoon parameters on the impact performance of composites, eight different kinds of SF-WKSF samples were fabricated, including different WKSF surface layer structures, different spacer yarn diameters and inclination-angles, different microballoon types and contents. The low-velocity impact tests were carried out on an INSTRON 9250 HV drop-weight impact tester and the impact resistances of SF-WKSF were analyzed; it is indicated that most SF-WKSF specimens show higher peak impact force and major damage energy compared to neat syntactic foam. The results also demonstrate that the surface layer structure, inclination-angle of the spacer yarn and the volume fraction and type of microballoon have a significant influence on the low-impact performance of SF-WKSF. In addition, a finite element analysis finished with ANSYS/LS-DYNA and LS-PrePost was used to simulate the impact behaviors of SF-WKSF. The results of the finite element analysis are in agreement with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document