Finite element analysis applied to a dental implant-supported structure

2013 ◽  
pp. 39-42
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Element Analysis

Finite element analysis on dental implant[ndash ]supported prostheses without passive fit

2002 ◽  
Vol 11 (1) ◽  
pp. 30-40 ◽  
Author(s):  
Chatchai Kunavisarut ◽  
Lisa A. Lang ◽  
Brian R. Stoner ◽  
David A. Felton
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Element Analysis ◽  
Passive Fit

scholarly journals Relationships of Stresses on Alveolar Bone and Abutment of Dental Implant from Various Bite Forces by Three-Dimensional Finite Element Analysis

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaoning Kang ◽  
Yiming Li ◽  
Yixi Wang ◽  
Yao Zhang ◽  
Dongsheng Yu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Three Dimensional ◽  
Central Incisor ◽  
Element Analysis ◽  
Implant Abutment ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Occlusal trauma caused by improper bite forces owing to the lack of periodontal membrane may lead to bone resorption, which is still a problem for the success of dental implant. In our study, to avoid occlusal trauma, we put forward a hypothesis that a microelectromechanical system (MEMS) pressure sensor is settled on an implant abutment to track stress on the abutment and predict the stress on alveolar bone for controlling bite forces in real time. Loading forces of different magnitudes (0 N–100 N) and angles (0–90°) were applied to the crown of the dental implant of the left central incisor in a maxillary model. The stress distribution on the abutment and alveolar bone were analyzed using a three-dimensional finite element analysis (3D FEA). Then, the quantitative relation between them was derived using Origin 2017 software. The results show that the relation between the loading forces and the stresses on the alveolar bone and abutment could be described as 3D surface equations associated with the sine function. The appropriate range of stress on the implant abutment is 1.5 MPa–8.66 MPa, and the acceptable loading force range on the dental implant of the left maxillary central incisor is approximately 6 N–86 N. These results could be used as a reference for the layout of MEMS pressure sensors to maintain alveolar bone dynamic remodeling balance.

Preliminary Evaluation of a New Dental Implant Design with Finite Element Analysis

2005 ◽  
Vol 288-289 ◽  
pp. 657-660
Author(s):  
Xue Jun Wang ◽  
R. Wang ◽  
J.M. Luo ◽  
Ji Yong Chen ◽  
Xing Dong Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Peak Stress ◽  
Implant Design ◽  
Preliminary Evaluation ◽  
Element Analysis ◽  
Mechanical Coupling ◽  
Stress Transmission ◽  
Reducing Stress

It is important to obtain mechanical coupling between dental implants and bone, because the lack of mechanical coupling may cause bone loss around implants. In this research, a new cylindrical dental implant composed of three parts was designed to offer favored mechanical environment for the bone. A special gap structure changed the means of the stress transmission and decreased the stress in the cortical bone around the neck of the implant. Through finite element analysis (FEA) of stress distribution in bone around implant-bone interface, the advantages of this new implant (reducing stress concentration in cervical cortex and satisfying varieties of clinical needs) were verified. The peak stress for the new design was about 30 percent less than that of the traditional implant and the flexibility of the design was also confirmed by changing the gap depth and the wall thickness.

Mechanical strength and fracture point of a dental implant under certification conditions: A numerical approach by finite element analysis

2018 ◽  
Vol 119 (4) ◽  
pp. 611-619 ◽  
Author(s):  
Guillermo de la Rosa Castolo ◽  
Sonia V. Guevara Perez ◽  
Pierre-Jean Arnoux ◽  
Laurent Badih ◽  
Franck Bonnet ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Strength ◽  
Dental Implant ◽  
Numerical Approach ◽  
Element Analysis
Sign in / Sign up

Export Citation Format

Share Document