Alloy Electrode and Its Breakthrough Technology

2013 ◽  
pp. 153-180
Keyword(s):  
Alloy Electrode ◽  
Breakthrough Technology

INCO-WELD C

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Tensile Properties ◽  
Stainless Steels ◽  
Arc Welding ◽  
Carbon Steels ◽  
Alloy Electrode ◽  
Shielded Metal Arc Welding ◽  
Medium Carbon ◽  
Metal Arc Welding ◽  
Spring Steels ◽  
Medium Carbon Steels

Abstract INCO WELD C Electrode is a stainless-alloy electrode especially designed for shielded-metal-arc welding of a broad range of materials, including many difficult-to-weld compositions. It can be used in stainless steels, mild and medium-carbon steels,and spring steels. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on joining. Filing Code: SS-632. Producer or source: Inco Alloys International Inc.

Research of Thermodynamics and Properties of Pb/WC-Zro2 Inert Electrodes Used in Zinc Electrodeposition

2010 ◽  
Vol 136 ◽  
pp. 43-47
Author(s):  
Rui Dong Xu ◽  
Jun Li Wang ◽  
Jian Feng Zhou
Keyword(s):  
Catalytic Activity ◽  
Oxygen Evolution ◽  
Metal Matrix ◽  
Stable Region ◽  
Alloy Electrode ◽  
Second Phase ◽  
Acid Solutions ◽  
Zro2 Particle ◽  
Zinc Electrodeposition ◽  
Inert Electrode

This research is to fabricate a Pb/WC-ZrO2 inert electrode used in zinc electrodeposition. First, the potential-pH diagram of Pb-H2O system was constructed and the thermodynamic stable region was calibrated in the diagram. On the basis, the co-deposition of Pb, WC and ZrO2 particles from fluorboric acid solutions was realized on the surface of Pb-4wt%Sb substrate. The results show that deposition amounts of ZrO2 and WC particles in the inert electrodes increase with increasing ZrO2 concentrations in the bath, WC particle is easier to deposit into the inert electrodes than ZrO2 particle. The distribution of WC and ZrO2 particles as the second phase within metal matrix Pb is very uniform. Compared with Pb-1wt%Ag alloy electrode, Pb/9.91wt%WC-3.62wt%ZrO2 inert electrode possesses better catalytic activity of oxygen evolution.

scholarly journals Genomic selection: a breakthrough technology in rice breeding

2021 ◽  
Author(s):  
Yang Xu ◽  
Kexin Ma ◽  
Yue Zhao ◽  
Xin Wang ◽  
Kai Zhou ◽  
...  
Keyword(s):  
Genomic Selection ◽  
Rice Breeding ◽  
Breakthrough Technology

Electrosynthesis of mesoporous Pt–Au alloy electrode for direct methanol fuel cell

2008 ◽  
Vol 69 (5-6) ◽  
pp. 1284-1287 ◽  
Author(s):  
Eun-Kyung Park ◽  
Jin-Kyu Lee ◽  
Young-Soo Kim ◽  
Gil-Pyo Kim ◽  
Sung-Hyeon Baeck
Keyword(s):  
Fuel Cell ◽  
Direct Methanol Fuel Cell ◽  
Alloy Electrode ◽  
Direct Methanol ◽  
Methanol Fuel Cell

Influence of Temperature on Self-Discharge and High-Rate Discharge Characteristics of La-Rich AB5-Based MH Alloy Electrode

2010 ◽  
Vol 654-656 ◽  
pp. 2835-2838 ◽  
Author(s):  
Huai Ying Zhou ◽  
Pei Pei Wang ◽  
Zhong Min Wang ◽  
Rui Ping Zou ◽  
Cheng Yuan Ni
Keyword(s):  
High Rate ◽  
Alloy Electrode ◽  
Discharge Process ◽  
Discharge Characteristics ◽  
Discharge Current Density ◽  
Influence Of Temperature ◽  
Capacity Loss ◽  
Influence Of Temperature On ◽  
Rate Discharge ◽  
High Rate Discharge

The influence of temperature on self-discharge and high-rate discharge characteristics of MmNi3.65(CoAlMn)1.35 alloy electrode has been investigated by way of simulated battery tests. Self-discharge behaviors of the MH electrode were measured using two methods: continuous mode self-discharge and step mode self-discharge. The results indicate that both reversible and irreversible capacity loss of MH electrode are mainly affected by temperature and storage time. When tested at 323K, the gross capacity loss after storage for 4 days is 30.88%, 15.02% at 273K and 20.09% at 303K, respectively. SEM analysis has shown that some needle corrosion products are formed on the surface of MH electrode, especially following storage at high temperature. The efficiency of high-rate discharge process is related closely to its discharge current density (DCD) adopted in tests, discharged capacities decreased with increasing DCD, and the electrode performed good high-rate discharge behavior at 303 K. Cyclic voltammetry (CV) analysis has indicated that near linear relationships between Ip and Scan rate (v) have been observed in the three temperature cases. The calculated values of hydrogen diffusion coefficient (D) within the electrode, are 1.479×10-8 cm2 / s at 273K, 2.437×10-8 cm2 / s at 303K, and 3.156×10-8 cm2 / s at 323K, respectively.

A reaction mechanism of atmospheric sintering for copper–phosphorus alloy electrode

2017 ◽  
Vol 695 ◽  
pp. 3353-3359 ◽  
Author(s):  
Shuichiro Adachi ◽  
Yutaka Yoshida ◽  
Takeshi Nojiri ◽  
Takahiko Kato ◽  
Seiichi Watanabe ◽  
...  
Keyword(s):  
Reaction Mechanism ◽  
Alloy Electrode ◽  
Phosphorus Alloy
Sign in / Sign up

Export Citation Format

Share Document