A practical, simplified chemical agent sensor placement methodology

2013 ◽  
pp. 70-89 ◽  
Keyword(s):  
Sensor Placement ◽  
Chemical Agent

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

Single Cell Based Microelectrode Array Biosensors

2003 ◽  
Vol 773 ◽  
Author(s):  
Mo Yang ◽  
Shalini Prasad ◽  
Xuan Zhang ◽  
Mihrimah Ozkan ◽  
Cengiz S. Ozkan
Keyword(s):  
Electrical Activity ◽  
Single Cell ◽  
Cellular Response ◽  
Microelectrode Array ◽  
Fast Fourier Transformation ◽  
Chemical Agent ◽  
Extracellular Potential ◽  
Membrane Excitability ◽  
Specific Chemical ◽  
Chemical Agents

AbstractExtracellular potential is an important parameter which indicates the electrical activity of live cells. Membrane excitability in osteoblasts plays a key role in modulating the electrical activity in the presence of chemical agents. The complexity of cell signal makes interpretation of the cellular response to a chemical agent very difficult. By analyzing shifts in the signal power spectrum, it is possible to determine a frequency spectrum also known as Signature Pattern Vectors (SPV) specific to a chemical. It is also essential to characterize single cell sensitivity and response time for specific chemical agents for developing detect-to-warn biosensors. We used a 4x4 multiple Pt microelectrode array to spatially position single osteoblast cells, by using a gradient AC field. Fast Fourier Transformation (FFT) and Wavelet Transformation (WT) analyses were used to extract information pertaining to the frequency of firing from the extracellular potential.

Removal of copper (Cu2+) by preparation modified carbon from macadamia shells by chemical agent with H2O2 in wastewater

2020 ◽  
pp. 215-221
Keyword(s):  
Heavy Metal ◽  
Processing Time ◽  
Chemical Agent ◽  
Optimum Conditions ◽  
Adsorption Ability

Macadamia shells were used to prepare modified carbon by chemical agent H2O2 (25%) in 48 hours with coke ratio: H2O2 = 1:10. Modified carbon from Macadamia shells with chemical agent H2O2 has capable of adsorption heavy metal copper (Cu 2+) at an assumption concentration is 30ppm in the optimum conditions such as pH = 4, dose is 1.8 g/l, and the processing time is 30 minutes. The result showed that the adsorption ability of the material reached the highest efficiency is 78.33%. This result showed that modified carbon from shells Macadamia by chemical agent H2O2 capable of removing applications on heavy metal copper (Cu2+) in wastewater.

Optimal Sensor Placement Algorithm for Structural Damage Identification

2020 ◽  
Vol 14 (1) ◽  
pp. 69-81
Author(s):  
C.H. Li ◽  
Q.W. Yang
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Sensor Placement ◽  
Optimization Procedure ◽  
Frame Structure ◽  
Truss Structures ◽  
Optimal Sensor Placement ◽  
Structural Damage Identification ◽  
Placement Algorithm ◽  
Sensor Locations

Background: Structural damage identification is a very important subject in the field of civil, mechanical and aerospace engineering according to recent patents. Optimal sensor placement is one of the key problems to be solved in structural damage identification. Methods: This paper presents a simple and convenient algorithm for optimizing sensor locations for structural damage identification. Unlike other algorithms found in the published papers, the optimization procedure of sensor placement is divided into two stages. The first stage is to determine the key parts in the whole structure by their contribution to the global flexibility perturbation. The second stage is to place sensors on the nodes associated with those key parts for monitoring possible damage more efficiently. With the sensor locations determined by the proposed optimization process, structural damage can be readily identified by using the incomplete modes yielded from these optimized sensor measurements. In addition, an Improved Ridge Estimate (IRE) technique is proposed in this study to effectively resist the data errors due to modal truncation and measurement noise. Two truss structures and a frame structure are used as examples to demonstrate the feasibility and efficiency of the presented algorithm. Results: From the numerical results, structural damages can be successfully detected by the proposed method using the partial modes yielded by the optimal measurement with 5% noise level. Conclusion: It has been shown that the proposed method is simple to implement and effective for structural damage identification.

Sign in / Sign up

Export Citation Format

Share Document