Structural Health Monitoring Based on Piezoelectric Transducers

2017 ◽  
pp. 471-484
Author(s):  
Fabricio G. Baptista ◽  
Jozue Vieira Filho ◽  
Daniel J. Inman
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Piezoelectric Transducers ◽  
Structural Health

Validation of Impedance-Based Structural Health Monitoring in a Simulated Biomedical Implant System

2018 ◽  
Author(s):  
Robert I. Ponder ◽  
Mohsen Safaei ◽  
Steven R. Anton
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Orthopedic Implants ◽  
The United States ◽  
The State ◽  
Piezoelectric Transducers ◽  
Bone Implant ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Number Of Patients

Total Knee Replacement (TKR) is an important and in-demand procedure for the aging population of the United States. In recent decades, the number of TKR procedures performed has shown an increase. This pattern is expected to continue in the coming decades. Despite medical advances in orthopedic surgery, a high number of patients, approximately 20%, are dissatisfied with their procedure outcomes. Common causes that are suggested for this dissatisfaction include loosening of the implant components as well as infection. To eliminate loosening as a cause, it is necessary to determine the state of the implant both intra- and post-operatively. Previous research has focused on passively sensing the compartmental loads between the femoral and tibial components. Common methods include using strain gauges or even piezoelectric transducers to measure force. An alternative to this is to perform real-time structural health monitoring (SHM) of the implant to determine changes in the state of the system. A commonly investigated method of SHM, referred to as the electromechanical impedance (EMI) method, involves using the coupled electromechanical properties of piezoelectric transducers to measure the host structure’s condition. The EMI method has already shown promise in aerospace and infrastructure applications, but has seen limited testing for use in the biomechanical field. This work is intended to validate the EMI method for use in detecting damage in cemented bone-implant interfaces, with TKR being used as a case study to specify certain experimental parameters. An experimental setup which represents the various material layers found in a bone-implant interface is created with various damage conditions to determine the ability for a piezoelectric sensor to detect and quantify the change in material state. The objective of this work is to provide validation as well as a foundation on which additional work in SHM of orthopedic implants and structures can be performed.

scholarly journals Vibration-Based Structural Health Monitoring Using Piezoelectric Transducers and Parametric t-SNE

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1716
Author(s):  
David Agis ◽  
Francesc Pozo
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Changes ◽  
Computational Cost ◽  
Principal Component ◽  
Piezoelectric Transducers ◽  
Majority Voting ◽  
Structural Health

In this paper, we evaluate the performance of the so-called parametric t-distributed stochastic neighbor embedding (P-t-SNE), comparing it to the performance of the t-SNE, the non-parametric version. The methodology used in this study is introduced for the detection and classification of structural changes in the field of structural health monitoring. This method is based on the combination of principal component analysis (PCA) and P-t-SNE, and it is applied to an experimental case study of an aluminum plate with four piezoelectric transducers. The basic steps of the detection and classification process are: (i) the raw data are scaled using mean-centered group scaling and then PCA is applied to reduce its dimensionality; (ii) P-t-SNE is applied to represent the scaled and reduced data as 2-dimensional points, defining a cluster for each structural state; and (iii) the current structure to be diagnosed is associated with a cluster employing two strategies: (a) majority voting; and (b) the sum of the inverse distances. The results in the frequency domain manifest the strong performance of P-t-SNE, which is comparable to the performance of t-SNE but outperforms t-SNE in terms of computational cost and runtime. When the method is based on P-t-SNE, the overall accuracy fluctuates between 99.5% and 99.75%.

scholarly journals A Methodological Review of Piezoelectric Based Acoustic Wave Generation and Detection Techniques for Structural Health Monitoring

2013 ◽  
Vol 2013 ◽  
pp. 1-22 ◽  
Author(s):  
Zhigang Sun ◽  
Bruno Rocha ◽  
Kuo-Ting Wu ◽  
Nezih Mrad
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Acoustic Waves ◽  
Life Cycle Cost ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Piezoelectric Transducers ◽  
Detection Techniques ◽  
Structural Health ◽  
Acoustic Wave Generation

Piezoelectric transducers have a long history of applications in nondestructive evaluation of material and structure integrity owing to their ability of transforming mechanical energy to electrical energy and vice versa. As condition based maintenance has emerged as a valuable approach to enhancing continued aircraft airworthiness while reducing the life cycle cost, its enabling structural health monitoring (SHM) technologies capable of providing on-demand diagnosis of the structure without interrupting the aircraft operation are attracting increasing R&D efforts. Piezoelectric transducers play an essential role in these endeavors. This paper is set forth to review a variety of ingenious ways in which piezoelectric transducers are used in today’s SHM technologies as a means of generation and/or detection of diagnostic acoustic waves.

Selective actuation and sensing of antisymmetric ultrasonic waves using shear-deforming piezoelectric transducers

2020 ◽  
pp. 147592172094493
Author(s):  
Parry Carrison ◽  
Hussain Altammar ◽  
Nathan Salowitz
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Electromechanical Coupling ◽  
Lead Zirconate ◽  
Guided Wave ◽  
Neutral Axis ◽  
Piezoelectric Transducers ◽  
Structural Health ◽  
Symmetric Wave ◽  
Wave Modes

Structural health monitoring of thin plate and beam structures using ultrasonic guided wave techniques has been widely studied and demonstrated advanced capabilities dependent on detailed analysis of specific guided wave modes. A common setup employs the d31 electromechanical coupling of piezoelectric wafer active sensors mounted on the surface of a beam or plate. Analysis of output signals from these basic systems is complicated because they represent multiple superposed ultrasonic wave modes that propagate at different velocities, are dispersive, and undergo reflection, refraction, and mode conversion. Multiple techniques have been pursued to overcome this complication. This article presents recent research into the use of shear-deforming lead zirconate titanate piezoelectric transducers, employing the d15 electromechanical coupling property, embedded within beam-like structures to selectively actuate and sense specific ultrasonic wave modes. The internally located transducers actuated and sensed transverse shear, coupled to bending and antisymmetric waves. A combination of results from finite element simulations and experiments found that d15 transducers located at the neutral axis of a beam exclusively coupled to antisymmetric wave modes and did neither directly actuate nor sense symmetric wave modes. Further study was performed to evaluate the effects of off-neutral-axis location on the mode selectivity and found that off axis location of the d15 transducer did not diminish the coupling to antisymmetric wave modes, but introduced coupling to symmetric wave modes. Additional study was performed to assess the ability of structural health monitoring systems employing shear-deforming d15 lead zirconate titanates located at the neutral axis to detect common forms of damage in laminate structures. The combination of selective actuation and selective sensing provides a powerful tool for signal analysis in ultrasonic structural health monitoring of thin plates and beams.

Experimental Characterization of Piezoelectric Transducers for Automotive Composite Structural Health Monitoring

2020 ◽  
Author(s):  
Massimiliana Carello ◽  
Alessandro Ferraris ◽  
Andrea Giancarlo Airale ◽  
Alessandro Messana ◽  
Lorenzo Sisca ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Piezoelectric Transducers ◽  
Experimental Characterization ◽  
Structural Health
Sign in / Sign up

Export Citation Format

Share Document