Molecular Self-Assemblies in Co- Crystals: Engineering Chemical Reactivity and Organic Semiconductors

2012 ◽  
pp. 239-254
Keyword(s):  
Organic Semiconductors ◽  
Chemical Reactivity

Spatially Resolved Photoelectron Spectroscopy: Recent Progress and Future Plans

1990 ◽  
Vol 48 (2) ◽  
pp. 388-389
Author(s):  
A. M. Bradshaw
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Reactivity ◽  
Target Material ◽  
Orbital Energy ◽  
Light Sources ◽  
Analytical Technique ◽  
Hartree Fock ◽  
Spatially Resolved ◽  
Koopmans Theorem ◽  
Surface Analytical Technique

X-ray photoelectron spectroscopy (XPS or ESCA) was not developed by Siegbahn and co-workers as a surface analytical technique, but rather as a general probe of electronic structure and chemical reactivity. The method is based on the phenomenon of photoionisation: The absorption of monochromatic radiation in the target material (free atoms, molecules, solids or liquids) causes electrons to be injected into the vacuum continuum. Pseudo-monochromatic laboratory light sources (e.g. AlKα) have mostly been used hitherto for this excitation; in recent years synchrotron radiation has become increasingly important. A kinetic energy analysis of the so-called photoelectrons gives rise to a spectrum which consists of a series of lines corresponding to each discrete core and valence level of the system. The measured binding energy, EB, given by EB = hv−EK, where EK is the kineticenergy relative to the vacuum level, may be equated with the orbital energy derived from a Hartree-Fock SCF calculation of the system under consideration (Koopmans theorem).

Cluster analysis for large data sets: applications to individual aerosol particles from the mid-pacific

1992 ◽  
Vol 50 (2) ◽  
pp. 1488-1489
Author(s):  
Thomas W. Shattuck ◽  
James R. Anderson ◽  
Neil W. Tindale ◽  
Peter R. Buseck
Keyword(s):  
Cluster Analysis ◽  
Chemical Reactivity ◽  
Large Data ◽  
Large Data Sets ◽  
Particle Analysis ◽  
Data Sets ◽  
Halogen Chemistry ◽  
Complete Study ◽  
Components Analysis ◽  
Automated Scanning

Individual particle analysis involves the study of tens of thousands of particles using automated scanning electron microscopy and elemental analysis by energy-dispersive, x-ray emission spectroscopy (EDS). EDS produces large data sets that must be analyzed using multi-variate statistical techniques. A complete study uses cluster analysis, discriminant analysis, and factor or principal components analysis (PCA). The three techniques are used in the study of particles sampled during the FeLine cruise to the mid-Pacific ocean in the summer of 1990. The mid-Pacific aerosol provides information on long range particle transport, iron deposition, sea salt ageing, and halogen chemistry.Aerosol particle data sets suffer from a number of difficulties for pattern recognition using cluster analysis. There is a great disparity in the number of observations per cluster and the range of the variables in each cluster. The variables are not normally distributed, they are subject to considerable experimental error, and many values are zero, because of finite detection limits. Many of the clusters show considerable overlap, because of natural variability, agglomeration, and chemical reactivity.

Energetic Control of Redox-Active Polymers Towards Safe Organic Bioelectronic Materials

2019 ◽  
Author(s):  
Alexander Giovannitti ◽  
Reem B. Rashid ◽  
Quentin Thiburce ◽  
Bryan D. Paulsen ◽  
Camila Cendra ◽  
...  
Keyword(s):  
Molecular Oxygen ◽  
Organic Semiconductors ◽  
Side Reaction ◽  
Semiconducting Polymers ◽  
Side Reactions ◽  
Redox Active ◽  
Donor Acceptor ◽  
Electrochemical Devices ◽  
Biological Environment ◽  
Device Operation

<p>Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side‑products. This is particularly important for bioelectronic devices which are designed to operate in biological systems. While redox‑active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side‑reactions with molecular oxygen during device operation. We show that this electrochemical side reaction yields hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>), a reactive side‑product, which may be harmful to the local biological environment and may also accelerate device degradation. We report a design strategy for the development of redox-active organic semiconductors based on donor-acceptor copolymers that prevent the formation of H<sub>2</sub>O<sub>2</sub> during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte‑gated devices in application-relevant environments.</p>

Structure Revision of Protoaculeine B, a Posttranslationally Modified N-Terminal Residue in the Peptide Toxin Aculeine B

2020 ◽  
Author(s):  
Raku Irie ◽  
Kei Miyako ◽  
Satoko Matsunaga ◽  
Ryuichi Sakai ◽  
Masato Oikawa
Keyword(s):  
Mass Spectra ◽  
Chemical Reactivity ◽  
Model Compounds ◽  
Structural Revision ◽  
Structure Revision ◽  
Peptide Toxin ◽  
One Step ◽  
Marine Peptide ◽  
Synthetic Models ◽  
Long Chain

<div>Here, we newly propose the structure of protoaculeine B, an N-terminal moiety of the marine peptide toxin aculeine B, as possessing the cis-disubstituted tetrahydro-beta-carboline framework. We prepared two truncated model compounds that lack long-chain polyamine by one-step Pictet-Spengler reaction of tryptophan, and compared the NMR and mass spectra and chemical reactivity with those of natural protoaculeine B. The synthetic models reproduced the profiles of the natural product well, which was conclusive for the structural revision.</div>

Quantitative Image Analysis of Fractal-like Thin Films of Organic Semiconductors

2018 ◽  
Author(s):  
Weikun Zhu ◽  
Erfan Mohammadi ◽  
Ying Diao
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Image Analysis ◽  
Fractal Dimension ◽  
Organic Semiconductors ◽  
Film Growth ◽  
Electronic Device ◽  
Significant Control ◽  
Semiconductor Thin Films ◽  
Two Parameters

Morphology modulation offers significant control over organic electronic device performance. However, morphology quantification has been rarely carried out via image analysis. In this work, we designed a MATLAB program to evaluate two key parameters describing morphology of small molecule semiconductor thin films: fractal dimension and film coverage. We then employ this program in a case study of meniscus-guided coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C<sub>8</sub>-BTBT) under various conditions to analyze a diverse and complex morphology set. The evolution of morphology in terms of fractal dimension and film coverage was studied as a function of coating speed. We discovered that combined fractal dimension and film coverage can quantitatively capture the key characteristics of C<sub>8</sub>-BTBT thin film morphology; change of these two parameters further inform morphology transition. Furthermore, fractal dimension could potentially shed light on thin film growth mechanisms.

Design and Synthesis of Two-Dimensional Covalent Organic Frameworks with Four-Arm Cores: Prediction of Remarkable Ambipolar Charge-Transport Properties

2019 ◽  
Author(s):  
Simil Thomas ◽  
Hong Li ◽  
Raghunath R. Dasari ◽  
Austin Evans ◽  
William Dichtel ◽  
...  
Keyword(s):  
Charge Transport ◽  
Organic Semiconductors ◽  
Density Functional ◽  
Polymer Networks ◽  
Two Dimensional ◽  
Covalent Organic Frameworks ◽  
X Ray Diffraction ◽  
Zinc Porphyrin ◽  
Design And Synthesis ◽  
Predicted Values

<p>We have considered three two-dimensional (2D) π-conjugated polymer networks (i.e., covalent organic frameworks, COFs) materials based on pyrene, porphyrin, and zinc-porphyrin cores connected <i>via</i> diacetylenic linkers. Their electronic structures, investigated at the density functional theory global-hybrid level, are indicative of valence and conduction bands that have large widths, ranging between 1 and 2 eV. Using a molecular approach to derive the electronic couplings between adjacent core units and the electron-vibration couplings, the three π-conjugated 2D COFs are predicted to have ambipolar charge-transport characteristics with electron and hole mobilities in the range of 65-95 cm<sup>2</sup>V<sup>-1</sup>s<sup>-1</sup>. Such predicted values rank these 2D COFs among the highest-mobility organic semiconductors. In addition, we have synthesized the zinc-porphyrin based 2D COF and carried out structural characterization via powder X-ray diffraction and surface area analysis, which demonstrates the feasability of these electroactive networks.</p>

Sign in / Sign up

Export Citation Format

Share Document