Numerical simulation of explosive demolition of a shear wall structure apartment

2012 ◽  
pp. 671-674
Keyword(s):  
Numerical Simulation ◽  
Shear Wall ◽  
Wall Structure

Numerical Simulation of Prefabricated Frame-Shear Wall Structure with Keyway Connection of the Column to Wall under Unidirectional Horizontal Load

2014 ◽  
Vol 578-579 ◽  
pp. 417-421
Author(s):  
Wei Jian Zhao ◽  
Ye Nan Guo ◽  
Jia Xin Tong ◽  
Shen Ming Yuan
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulation ◽  
Concrete Structure ◽  
Shear Wall ◽  
Wall Structure ◽  
Horizontal Load ◽  
Straight Chain

To study on the property of the column to wall connection in the prefabricated frame-shear wall structure, these four connection ways are introduced in the article, which are U-shaped ,double straight ,chain buckle, double straight vertical U-shaped bar splicing. Using ABAQUS to simulate, comparing results of four connection ways with the cast-in-situ concrete structure. The results show that mechanical properties of four prefabricated structures are similar to the cast-in-situ structure, but the maximum bearing capacities are reduced.

Study on Rational Ratios of Lateral Stiffness for Masonry Building with Frame Structure at First Two Stories

2012 ◽  
Vol 174-177 ◽  
pp. 2012-2015
Author(s):  
Xiao Long Zhou ◽  
Ying Min Li ◽  
Lin Bo Song ◽  
Qian Tan
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Shear Wall ◽  
Calculation Model ◽  
Frame Structure ◽  
Wall Structure ◽  
Masonry Building ◽  
Lateral Stiffness ◽  
Stiffness Ratio ◽  
Lateral Stiffness Ratio

There are two typical seismic damage characteristics to the masonry building with frame shear wall structure at first two stories, and the lateral stiffness ratio of the third storey to the second storey is one of the key factors mostly affecting the seismic performance of this kind of building. However, some factors are not considered sufficiently in current Chinese seismic codes. According to the theory of performance-based seismic design, the seismic performance of this kind of structure is analyzed in this paper by taking time-history analysis on models which with different storey stiffness ratios. The results show that when the lateral stiffness ratio controlled in a reasonable range, the upper masonry deformation can be ensured in a range of elastic roughly, and the bottom frame can be guaranteed to have sufficient deformation and energy dissipation capacity. Finally, according to the seismic performance characteristics of masonry building with frame shear wall structure at first two stories, especially the characteristics under strong earthquakes, a method of simplified calculation model for the upper masonry is discussed in this paper.

Study on Seismic Behavior of the L-Shape Steel Reinforced Concrete Short-Pier Shear Wall with Different Concrete Strength

2013 ◽  
Vol 353-356 ◽  
pp. 1990-1999
Author(s):  
Yi Sheng Su ◽  
Er Cong Meng ◽  
Zu Lin Xiao ◽  
Yun Dong Pi ◽  
Yi Bin Yang
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Concrete Strength ◽  
Shear Walls ◽  
Shear Wall ◽  
Simulation Software ◽  
Steel Reinforced Concrete ◽  
Shrinkage Effect

In order to discuss the effect of different concrete strength on the seismic behavior of the L-shape steel reinforced concrete (SRC) short-pier shear wall , this article analyze three L-shape steel reinforced concrete short-pier shear walls of different concrete strength with the numerical simulation software ABAQUS, revealing the effects of concrete strength on the walls seismic behavior. The results of the study show that the concrete strength obviously influence the seismic performance. With the concrete strength grade rise, the bearing capacity of the shear wall becomes large, the ductility becomes low, the pinch shrinkage effect of the hysteresis loop becomes more obvious.

Study on the shear wall structure with combined form of replaceable devices

2017 ◽  
Vol 21 (9) ◽  
pp. 1327-1348
Author(s):  
Cong Chen ◽  
Renjie Xiao ◽  
Xilin Lu ◽  
Yun Chen
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Performance Comparison ◽  
Wall Structure ◽  
Structural Part ◽  
Coupled Shear Wall ◽  
Wall Structures ◽  
Strength And Stiffness ◽  
Energy Dissipated ◽  
Resilient Structure

Structure with replaceable devices is a type of earthquake resilient structure developed to restore the structure immediately after strong earthquakes. Current researches focus on one type of the replaceable device located in the structural part that is most likely to be damaged; however, plastic deformation would not be limited in a specific part but expand to other parts. To concentrate possible damage in shear wall structures, combined form of replaceable devices was introduced in this article. Based on previous studies, combined form of replaceable coupling beam and replaceable wall foot was used in a coupled shear wall. Influences of the dimension and location of the replaceable devices to the strength and stiffness of the shear wall were investigated through numerical modeling, which was verified by experimental data. Performance comparison between the shear walls with one type and combined form of replaceable devices and the conventional coupled shear wall was performed. In general, the shear wall with combined form of replaceable devices is shown to be better energy dissipated, and proper dimensions and locations of the replaceable devices should be determined.

Sign in / Sign up

Export Citation Format

Share Document