Heterostructures and Strain Relaxation in Semiconductor Nanowires

2012 ◽  
pp. 189-228
Author(s):  
Frank Glas
Keyword(s):  
Strain Relaxation ◽  
Semiconductor Nanowires

TEM study of phosphorus-implanted pseudomorphic Si0.88Ge0.12 on Si(100)

1995 ◽  
Vol 53 ◽  
pp. 468-469
Author(s):  
N. David Theodore ◽  
Donald Y.C Lie ◽  
J. H. Song ◽  
Peter Crozier
Keyword(s):  
Integrated Circuits ◽  
Heterojunction Bipolar Transistors ◽  
Integrated Circuit ◽  
High Speed ◽  
Room Temperature ◽  
Strain Relaxation ◽  
Bipolar Transistors ◽  
Sige Hbt ◽  
Integrated Circuit Manufacturing ◽  
Microstructural Behavior

SiGe is being extensively investigated for use in heterojunction bipolar-transistors (HBT) and high-speed integrated circuits. The material offers adjustable bandgaps, improved carrier mobilities over Si homostructures, and compatibility with Si-based integrated-circuit manufacturing. SiGe HBT performance can be improved by increasing the base-doping or by widening the base link-region by ion implantation. A problem that arises however is that implantation can enhance strain-relaxation of SiGe/Si.Furthermore, once misfit or threading dislocations result, the defects can give rise to recombination-generation in depletion regions of semiconductor devices. It is of relevance therefore to study the damage and anneal behavior of implanted SiGe layers. The present study investigates the microstructural behavior of phosphorus implanted pseudomorphic metastable Si0.88Ge0.12 films on silicon, exposed to various anneals.Metastable pseudomorphic Si0.88Ge0.12 films were grown ~265 nm thick on a silicon wafer by molecular-beam epitaxy. Pieces of this wafer were then implanted at room temperature with 100 keV phosphorus ions to a dose of 1.5×1015 cm-2.

Strain Relaxation and In-Situ Observation of Voiding in Passivated Aluminum Alloy Lines.

1993 ◽  
Vol 308 ◽  
Author(s):  
Paul R. Besser ◽  
Thomas N. Marieb ◽  
John C. Bravman
Keyword(s):  
Strain Relaxation ◽  
Grazing Incidence ◽  
Scanning Transmission Electron Microscope ◽  
In Situ Observation ◽  
X Ray ◽  
Scanning Transmission ◽  
Length Width ◽  
Measured Strain ◽  
Ray Geometry

ABSTRACTStrain relaxation in passivated Al-0.5% Cu lines was measured using X-ray diffraction coupled with in-situ observation of the formation and growth of stress induced voids. Samples of 1 μm thick Al-0.5% Cu lines passivated with Si3N4 were heated to 380ºC, then cooled and held at 150ºC. During the test, principal strains along the length, width, and height of the line were determined using a grazing incidence x-ray geometry. From these measurements the hydrostatic strain in the metal was calculated and strain relaxation was observed. The thermal cycle was duplicated in a high voltage scanning transmission electron microscope equipped with a backscattered electron detector. The 1.25 μm wide lines were seen to have initial stress voids. Upon heating these voids reduced in size until no longer observable. Once the samples were cooled to 150ºC, voids reappeared and grew. The measured strain relaxation is discussed in terms of void and θ-phase (Al2Cu) formation.

Strain Relaxation in (CdMg)Te Layers Grown by Molecular Beam Epitaxy

1995 ◽  
Vol 182-184 ◽  
pp. 255-258
Author(s):  
H. Heinke ◽  
Franz Dieter Fischer ◽  
A. Waag ◽  
T. Litz ◽  
M. Korn ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Strain Relaxation

Controlling Strain Relaxation by Interface Design in Highly Lattice-Mismatched Heterostructure

Nano Letters ◽  
2021 ◽  
Author(s):  
Yang Zhang ◽  
Wenlong Si ◽  
Yanli Jia ◽  
Pu Yu ◽  
Rong Yu ◽  
...  
Keyword(s):  
Interface Design ◽  
Strain Relaxation

scholarly journals Improved Performance of GaN-Based Light-Emitting Diodes Grown on Si (111) Substrates with NH3 Growth Interruption

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 399
Author(s):  
Sang-Jo Kim ◽  
Semi Oh ◽  
Kwang-Jae Lee ◽  
Sohyeon Kim ◽  
Kyoung-Kook Kim
Keyword(s):  
Buffer Layer ◽  
Light Emitting Diodes ◽  
Defect Density ◽  
Strain Relaxation ◽  
Multiple Quantum Well ◽  
Light Output ◽  
Multiple Quantum ◽  
Light Emitting ◽  
Growth Interruption ◽  
Aln Buffer

We demonstrate the highly efficient, GaN-based, multiple-quantum-well light-emitting diodes (LEDs) grown on Si (111) substrates embedded with the AlN buffer layer using NH3 growth interruption. Analysis of the materials by the X-ray diffraction omega scan and transmission electron microscopy revealed a remarkable improvement in the crystalline quality of the GaN layer with the AlN buffer layer using NH3 growth interruption. This improvement originated from the decreased dislocation densities and coalescence-related defects of the GaN layer that arose from the increased Al migration time. The photoluminescence peak positions and Raman spectra indicate that the internal tensile strain of the GaN layer is effectively relaxed without generating cracks. The LEDs embedded with an AlN buffer layer using NH3 growth interruption at 300 mA exhibited 40.9% higher light output power than that of the reference LED embedded with the AlN buffer layer without NH3 growth interruption. These high performances are attributed to an increased radiative recombination rate owing to the low defect density and strain relaxation in the GaN epilayer.

scholarly journals Electromagnetic field emitted by core–shell semiconductor nanowires driven by an alternating current

2021 ◽  
Vol 130 (3) ◽  
pp. 034301
Author(s):  
Miguel Urbaneja Torres ◽  
Kristjan Ottar Klausen ◽  
Anna Sitek ◽  
Sigurdur I. Erlingsson ◽  
Vidar Gudmundsson ◽  
...  
Keyword(s):  
Electromagnetic Field ◽  
Alternating Current ◽  
Semiconductor Nanowires ◽  
Core Shell

scholarly journals Misfit Strain Relaxation of Ferroelectric PbTiO3/LaAlO3 (111) Thin Film System

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Y. B. Xu ◽  
Y. L. Tang ◽  
Y. L. Zhu ◽  
Y. Liu ◽  
S. Li ◽  
...  
Keyword(s):  
Thin Film ◽  
Strain Relaxation ◽  
Misfit Strain ◽  
Film System ◽  
Thin Film System
Sign in / Sign up

Export Citation Format

Share Document