Policy and legal analysis of development of China’s low carbon buildings

2012 ◽  
pp. 188-192
Author(s):  
K Zhou ◽  
W Luo ◽  
B Li ◽  
S Ouyang ◽  
J Fu ◽  
...  
Keyword(s):  
Legal Analysis ◽  
Low Carbon

scholarly journals THE DEVELOPMENT OF THE LEGAL FRAMEWORK FOR “GREEN” FINANCE IN RUSSIA, THE EU AND CHINA: A COMPARATIVE LEGAL ANALYSIS

2020 ◽  
Vol 24 (2) ◽  
pp. 335-352 ◽  
Author(s):  
Elena P. Ermakova
Keyword(s):  
Climate Change ◽  
European Union ◽  
Legal Framework ◽  
Legal Regulation ◽  
Legal Analysis ◽  
Low Carbon ◽  
The European Union ◽  
Dialectical Logic ◽  
Green Finance ◽  
The Eu

The article is devoted to the analysis of the legal regulation of green financing in the European Union, China and Russia. It has been substantiated that a harmonious and completed system of regulatory regulation of green financing has not yet developed either in the PRC or the EU. In this regard, a comparative analysis of the above issues is of particular importance. The purpose of this article is to form an understanding of the legal framework for green finance in the European Union, China and Russia based on an analysis of regulatory acts and scientific sources. The following methods have been applied: empirical methods of comparison, description, interpretation; theoretical methods of formal and dialectical logic. Private scientific methods employed in the work are legal-dogmatic and the method of interpretation of legal norms. Results: the study showed that green financing refers to financial transactions that support the transition to an economy with low carbon emissions and the fight against climate change. In recent years, China has been the leader in green financing, accounting for 28%, or $ 32 billion, of green bonds issued in 2018. Conclusions: In the PRC, the concept and foundations of the legal regulation of green finance are enshrined in the 2016 Guide to Creating a Green Financial System. The main elements included in the concept comprise: 1) pilot areas of green financing, 2) green loans, 3) green funds and public-private partnerships; 4) green securities; 5) green insurance; 6) environmental credit trading; 7) environ-mental risks. The European Union also strives to be a global leader in the fight against climate change. A number of EU regulations and directives regulate various aspects of green financing. On December 11, 2019, the European Commission introduced the European Green Deal, a new concept for economic growth aimed at making Europe the first climate neutral continent. The most ambitious draft of this program is the development of a pan-European climate law (climate code), a draft of which is due in March 2020. Russia is still lagging behind world leaders on the regulatory regulation of green financing, but the first steps in this direction have already been taken. The study was prepared with the financial support of the Russian Federal Property Fund in the framework of the scientific project No. 20-011-00270 "а" (Scientific adviser - E.E. Frolova).

S.E.M.-T.E.M. Image Comparison

1971 ◽  
Vol 29 ◽  
pp. 132-133
Author(s):  
G. M. Greene ◽  
J. W. Sprys
Keyword(s):  
Electron Microscope ◽  
Low Carbon Steel ◽  
Secondary Emission ◽  
Low Carbon ◽  
Preparation Time ◽  
Actual Surface ◽  
Fine Detail ◽  
Transmission Electron ◽  
Transmission Study ◽  
Large Sections

The present study demonstrates that fracture surfaces appear strikingly different when observed in the transmission electron microscope by replication and in the scanning electron microscope by backscattering and secondary emission. It is important to know what form these differences take because of the limitations of each instrument. Replication is useful for study of surfaces too large for insertion into the S.E.M. and for resolution of fine detail at high magnification with the T.E.M. Scanning microscopy reduces sample preparation time and allows large sections of the actual surface to be viewed.In the present investigation various modes of the S.E.M. along with the transmission mode in the T.E.M. were used to study one area of a fatigue surface of a low carbon steel. Following transmission study of a platinum carbon replica in the T.E.M. and S.E.M. the replica was coated with a gold layer approximately 200A° in thickness to improve electron emission.

Lattice Imaging of Twin, Lath and α/Martensite Boundaries in Duplex Low Carbon Steels

1977 ◽  
Vol 35 ◽  
pp. 118-119
Author(s):  
J. Y. Koo ◽  
G. Thomas
Keyword(s):  
High Resolution Electron Microscopy ◽  
Ferrite Matrix ◽  
Carbon Steels ◽  
Bright Field Image ◽  
Low Carbon ◽  
Lattice Imaging ◽  
Bright Field ◽  
Lattice Image ◽  
New Information ◽  
Resolution Electron

High resolution electron microscopy has been shown to give new information on defects(1) and phase transformations in solids (2,3). In a continuing program of lattice fringe imaging of alloys, we have applied this technique to the martensitic transformation in steels in order to characterize the atomic environments near twin, lath and αmartensite boundaries. This paper describes current progress in this program.Figures A and B show lattice image and conventional bright field image of the same area of a duplex Fe/2Si/0.1C steel described elsewhere(4). The microstructure consists of internally twinned martensite (M) embedded in a ferrite matrix (F). Use of the 2-beam tilted illumination technique incorporating a twin reflection produced {110} fringes across the microtwins.

Characterization of carbides in M50NiL

1991 ◽  
Vol 49 ◽  
pp. 606-607
Author(s):  
L. S. Lin ◽  
K. P. Gumz ◽  
A. V. Karg ◽  
C. C. Law
Keyword(s):  
Temperature Effects ◽  
Base Composition ◽  
Lattice Parameter ◽  
Control Surface ◽  
Carbide Formation ◽  
Particle Sizes ◽  
Low Carbon ◽  
Fee Structure ◽  
Heat Treated

Carbon and temperature effects on carbide formation in the carburized zone of M50NiL are of great importance because they can be used to control surface properties of bearings. A series of homogeneous alloys (with M50NiL as base composition) containing various levels of carbon in the range of 0.15% to 1.5% (in wt.%) and heat treated at temperatures between 650°C to 1100°C were selected for characterizations. Eleven samples were chosen for carbide characterization and chemical analysis and their identifications are listed in Table 1.Five different carbides consisting of M6C, M2C, M7C3 and M23C6 were found in all eleven samples examined as shown in Table 1. M6C carbides (with least carbon) were found to be the major carbide in low carbon alloys (<0.3% C) and their amounts decreased as the carbon content increased. In sample C (0.3% C), most particles (95%) encountered were M6C carbide with a particle sizes range between 0.05 to 0.25 um. The M6C carbide are enriched in both Mo and Fe and have a fee structure with lattice parameter a=1.105 nm (Figure 1).

Thermomechanical Treatment of a 4340 Ni-Cr-Mo Alloy Steel

1981 ◽  
Vol 39 ◽  
pp. 314-315 ◽  
Author(s):  
M.T. Jahn ◽  
J.C. Yang ◽  
C.M. Wan
Keyword(s):  
Mechanical Property ◽  
Chemical Composition ◽  
Alloy Steel ◽  
Thermomechanical Treatment ◽  
Room Temperature ◽  
Good Combination ◽  
Thermal Treatments ◽  
Low Carbon ◽  
4340 Steel ◽  
Good Improvement

4340 Ni-Cr-Mo alloy steel is widely used due to its good combination of strength and toughness. The mechanical property of 4340 steel can be improved by various thermal treatments. The influence of thermomechanical treatment (TMT) has been studied in a low carbon Ni-Cr-Mo steel having chemical composition closed to 4340 steel. TMT of 4340 steel is rarely examined up to now. In this study we obtain good improvement on the mechanical property of 4340 steel by TMT. The mechanism is explained in terms of TEM microstructures4340 (0.39C-1.81Ni-0.93Cr-0.26Mo) steel was austenitized at 950°C for 30 minutes. The TMTed specimen (T) was obtained by forging the specimen continuously as the temperature of the specimen was decreasing from 950°C to 600°C followed by oil quenching to room temperature. The thickness reduction ratio by forging is 40%. The conventional specimen (C) was obtained by quenching the specimen directly into room temperature oil after austenitized at 950°C for 30 minutes. All quenched specimens (T and C) were then tempered at 450, 500, 550, 600 or 650°C for four hours respectively.

The microstructure change of low-carbon electrical steels by residual aluminum

1989 ◽  
Vol 47 ◽  
pp. 286-287
Author(s):  
C.K. Hou ◽  
C.T. Hu ◽  
Sanboh Lee
Keyword(s):  
Annealing Treatment ◽  
Low Carbon ◽  
Electrical Steels ◽  
Vacuum Degassing ◽  
Spherical Inclusions ◽  
Residual Aluminum ◽  
Average Grain Size ◽  
The Matrix ◽  
Fine Size ◽  
To Come

The fully processed low-carbon electrical steels are generally fabricated through vacuum degassing to reduce the carbon level and to avoid the need for any further decarburization annealing treatment. This investigation was conducted on eighteen heats of such steels with aluminum content ranging from 0.001% to 0.011% which was believed to come from the addition of ferroalloys.The sizes of all the observed grains are less than 24 μm, and gradually decrease as the content of aluminum is increased from 0.001% to 0.007%. For steels with residual aluminum greater than 0. 007%, the average grain size becomes constant and is about 8.8 μm as shown in Fig. 1. When the aluminum is increased, the observed grains are changed from the uniformly coarse and equiaxial shape to the fine size in the region near surfaces and the elongated shape in the central region. SEM and EDAX analysis of large spherical inclusions in the matrix indicate that silicate is the majority compound when the aluminum propotion is less than 0.003%, then the content of aluminum in compound inclusion increases with that in steel.

Precipitation at the transformation interface of pearlite in steel

1990 ◽  
Vol 48 (4) ◽  
pp. 912-913
Author(s):  
F. A. Khalid ◽  
D. V. Edmonds
Keyword(s):  
Thin Foil ◽  
Carbon Steels ◽  
Model Alloy ◽  
Low Carbon ◽  
High Carbon ◽  
Growth Interface ◽  
Medium Carbon ◽  
Interphase Precipitation ◽  
Solution Treated ◽  
Wide Range

The austenite/pearlite growth interface in a model alloy steel (Fe-1lMn-0.8C-0.5V nominal wt%) is being studied in an attempt to characterise the morphology and mechanism of VC precipitation at the growth interface. In this alloy pearlite nodules can be grown isothermally in austenite that remains stable at room temperature thus facilitating examination of the transformation interfaces. This study presents preliminary results of thin foil TEM of the precipitation of VC at the austenite/ferrite interface, which reaction, termed interphase precipitation, occurs in a number of low- carbon HSLA and microalloyed medium- and high- carbon steels. Some observations of interphase precipitation in microalloyed low- and medium- carbon commercial steels are also reported for comparison as this reaction can be responsible for a significant increase in strength in a wide range of commercial steels.The experimental alloy was made as 50 g argon arc melts using high purity materials and homogenised. Samples were solution treated at 1300 °C for 1 hr and WQ. Specimens were then solutionised at 1300 °C for 15 min. and isothermally transformed at 620 °C for 10-18hrs. and WQ. Specimens of microalloyed commercial steels were studied in either as-rolled or as- forged conditions. Detailed procedures of thin foil preparation for TEM are given elsewhere.

Low-Carbon Tourism Experience Scale

2019 ◽  
Author(s):  
Tsung Hung Lee ◽  
Fen-Hauh Jan
Keyword(s):  
Low Carbon ◽  
Tourism Experience
Sign in / Sign up

Export Citation Format

Share Document