Control of Vibrations due to Moving Loads on Suspension Bridges

2006 ◽  
Vol 11 (3) ◽  
pp. 293-318 ◽  
Author(s):  
M. Zribi ◽  
N. B. Almutairi ◽  
M. Abdel-Rohman
Keyword(s):  
Bridge Deck ◽  
Suspension Bridge ◽  
Lyapunov Theory ◽  
Dynamic Responses ◽  
Suspension Bridges ◽  
Control Force ◽  
Moving Loads ◽  
Hydraulic Actuator ◽  
Long Span ◽  
Suspended Cables

The flexibility and low damping of the long span suspended cables in suspension bridges makes them prone to vibrations due to wind and moving loads which affect the dynamic responses of the suspended cables and the bridge deck. This paper investigates the control of vibrations of a suspension bridge due to a vertical load moving on the bridge deck with a constant speed. A vertical cable between the bridge deck and the suspended cables is used to install a hydraulic actuator able to generate an active control force on the bridge deck. Two control schemes are proposed to generate the control force needed to reduce the vertical vibrations in the suspended cables and in the bridge deck. The proposed controllers, whose design is based on Lyapunov theory, guarantee the asymptotic stability of the system. The MATLAB software is used to simulate the performance of the controlled system. The simulation results indicate that the proposed controllers work well. In addition, the performance of the system with the proposed controllers is compared to the performance of the system controlled with a velocity feedback controller.

Vibration Serviceability of Long Span Cable Bridges using Long-term Monitoring Data

2019 ◽  
Author(s):  
Eui-seung Hwang ◽  
Sun-Kon Kim ◽  
Do-Young Kim ◽  
Ki-Jung Park
Keyword(s):  
Monitoring Data ◽  
Suspension Bridges ◽  
Span Length ◽  
Bridge Design ◽  
Long Span ◽  
Vibration Serviceability ◽  
Long Term Monitoring ◽  
Deflection Limit ◽  
Term Monitoring

<p>Along with building slender and longer span structures, vibration serviceability becomes more important considerations in bridge design and maintenance. In this study, vibration serviceability and deflection limit for long span cable bridges are investigated using long-term monitoring data such as accelerations and displacements of bridges. Exampled bridges are Yi Sun-Sin Grand Bridge (suspension bridge, main span length=1,545m) and 2<sup>nd</sup> Jindo Grand Bridge (cable stayed bridge, main span length=344m). Long-term data are analyzed and compared with various design codes, guidelines, and other research results. Probability of exceedance are calculated for each criterion. Regarding on deflection limits, Korean Bridge Design Code (Limit State Design) specifies L/400 and L/350 for cable stayed and suspension bridges, respectively. Saadeghvaziri suggested deflection limit based on natural frequency, acceleration limit of 0.5 m/s² and vehicle speed. Various human comfort criteria on vibration are also applied including ISO standards. The results of this study are expected to be useful reference for the design, the proper planning and deflection review of the long span cable bridges around the world. Further researches are required to find the optimum deflection or vibration criteria for long span bridge and their effects on bridge clearance and elevation.</p>

Seismic Performance of the Buckling-Restrained Brace Central Buckle for Long-Span Suspension Bridges

2018 ◽  
Vol 12 (05) ◽  
pp. 1850015 ◽  
Author(s):  
Wei Guo ◽  
Jianzhong Li ◽  
Nailiang Xiang
Keyword(s):  
Seismic Performance ◽  
Design Procedure ◽  
Suspension Bridges ◽  
Preliminary Design ◽  
Viscous Dampers ◽  
Buckling Restrained Brace ◽  
Long Span ◽  
Parametric Analyses ◽  
Yield Force ◽  
Central Buckle

In this paper, a novel central buckle composed of buckling-restrained braces (BRBs) is developed for long-span suspension bridges, and its preliminary design procedure is presented. Seismic performance of suspension bridges equipped with BRB central buckles is investigated and compared with those with conventional central buckles (e.g. rigid or flexible central buckles). Furthermore, the effect of BRB yield force, as well as the effectiveness of BRB central buckles combined with viscous dampers, is evaluated using parametric analyses. The results indicate that the BRB central buckle is more effective than other central buckles in reducing both the longitudinal girder displacements and force demands on towers during an earthquake. Furthermore, the combination of BRB central buckles and viscous dampers is a superior option for mitigating the seismic response of long-span suspension bridges.

scholarly journals Probabilistic Assessment of the Safety of Main Cables for Long-Span Suspension Bridges considering Corrosion Effects

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Hao Tian ◽  
Jiji Wang ◽  
Sugong Cao ◽  
Yuanli Chen ◽  
Luwei Li
Keyword(s):  
Probability Model ◽  
Steel Wire ◽  
Suspension Bridge ◽  
Element Model ◽  
Traffic Load ◽  
Suspension Bridges ◽  
Accelerated Corrosion ◽  
Long Span ◽  
Accelerated Corrosion Tests ◽  
Main Cables

This paper presents a reliability analysis to assess the safety of corroded main cables of a long-span suspension bridge. A multiscale probability model was established for the resistance of the main cables considering the length effect and the Daniels effect. Corrosion effects were considered in the wire scale by relating the test results from accelerated corrosion tests to the corrosion stages and in the cable scale by adopting a corrosion stage distribution of the main cable section in NCHRP Report 534. The load effects of temperature, wind load, and traffic load were obtained by solving a finite element model with inputs from in-service monitoring data. The so-obtained reliability index of the main cables reduces significantly after operation for over 50 years and falls below the design target value due to corrosion effects on the mechanical properties of the steel wire. Multiple measures should be taken to delay the corrosion effects and ensure the safety of the main cables in the design service life.

Sign in / Sign up

Export Citation Format

Share Document