Magnetic Abrasive Finishing (MAF)

2016 ◽  
pp. 173-200 ◽  
Keyword(s):  
Magnetic Abrasive Finishing ◽  
Abrasive Finishing

Improve the Micro-hardness of Single Point Incremental Forming Product Using Magnetic Abrasive Finishing

2020 ◽  
Vol 38 (8A) ◽  
pp. 1137-1142
Author(s):  
Baqer A. Ahmed ◽  
Saad K. Shather ◽  
Wisam K. Hamdan
Keyword(s):  
Vickers Hardness ◽  
Feed Rate ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Step Size ◽  
Coil Current ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing

In this paper the Magnetic Abrasive Finishing (MAF) was utilized after Single Point Incremental Forming (SPIF) process as a combined finishing process. Firstly, the Single Point Incremental forming was form the truncated cone made from low carbon steel (1008-AISI) based on Z-level tool path then the magnetic abrasive finishing process was applied on the surface of the formed product. Box-Behnken design of experiment in Minitab 17 software was used in this study. The influences of different parameters (feed rate, machining step size, coil current and spindle speed) on change in Micro-Vickers hardness were studied. The maximum and minimum change in Micro-Vickers hardness that achieved from all the experiments were (40.4 and 1.1) respectively. The contribution percent of (feed rate, machining step size, coil current and spindle speed) were (7.1, 18.068, 17.376 and 37.894) % respectively. After MAF process all the micro surface cracks that generated on the workpiece surface was completely removed from the surface.

Process parameter optimization for the magnetic abrasive finishing of SS310s steel

2020 ◽  
Vol 62 (2) ◽  
pp. 157-164 ◽  
Author(s):  
Kandhasamy Suganeswaran ◽  
Rathinasamy Parameshwaran ◽  
Thangamuthu Mohanraj ◽  
Balasubramaniyam Meenakshipriya
Keyword(s):  
Parameter Optimization ◽  
Process Parameter ◽  
Process Parameter Optimization ◽  
Magnetic Abrasive Finishing ◽  
Abrasive Finishing

scholarly journals Development of a New Finishing Process Combining a Fixed Abrasive Polishing with Magnetic Abrasive Finishing Process

Machines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 81
Author(s):  
Yanhua Zou ◽  
Ryunosuke Satou ◽  
Ozora Yamazaki ◽  
Huijun Xie
Keyword(s):  
Alumina Ceramic ◽  
Ceramic Plate ◽  
Polishing Process ◽  
High Quality ◽  
Influence Of Process Parameters ◽  
Magnetic Abrasive Finishing ◽  
Nano Scale ◽  
Finishing Process ◽  
Abrasive Finishing ◽  
Fixed Abrasive

High quality, highly efficient finishing processes are required for finishing difficult-to-machine materials. Magnetic abrasive finishing (MAF) process is a finishing method that can obtain a high accuracy surface using fine magnetic particles and abrasive particles, but has poor finishing efficiency. On the contrary, fixed abrasive polishing (FAP) is a polishing process can obtain high material removal efficiency but often cannot provide a high-quality surface at the nano-scale. Therefore, this work proposes a new finishing process, which combines the magnetic abrasive finishing process and the fixed abrasive polishing process (MAF-FAP). To verify the proposed methodology, a finishing device was developed and finishing experiments on alumina ceramic plates were performed. Furthermore, the mechanism of the MAF-FAP process was investigated. In addition, the influence of process parameters on finishing characteristics is discussed. According to the experimental results, this process can achieve high-efficiency finishing of brittle hard materials (alumina ceramics) and can obtain nano-scale surfaces. The surface roughness of the alumina ceramic plate is improved from 202.11 nm Ra to 3.67 nm Ra within 30 min.

Magnetic Abrasive Deburring Technology for Blanks

2016 ◽  
Vol 25 ◽  
pp. 1-10 ◽  
Author(s):  
Yuri M. Baron
Keyword(s):  
Sheet Steel ◽  
Cutting Tools ◽  
Manual Work ◽  
Magnetic Abrasive Finishing ◽  
Work Area ◽  
Abrasive Finishing ◽  
Geometrical Form

Blanks made from sheet steel or other materials have burrs on their edges. The burrs are formed on the blanks at cutting down or processing of them by cutting tools. Removing of the burrs requires a lot of manual work. Frequently the blanks have small rigidity, and it especially complicates removal of the burrs. This article describes intensification of the magnetic abrasive finishing method (MAF) with a goal to eliminate the manual deburring and to raise productivity of deburring on the flexible blanks. The study goal was achieved by optimization of MAF conditions and a of the work area geometrical form.

Sign in / Sign up

Export Citation Format

Share Document