Lower bound approaches to design at ultimate limit state

2011 ◽  
pp. 513-552
Keyword(s):  
Lower Bound ◽  
Limit State ◽  
Ultimate Limit State ◽  
Ultimate Limit

Ultimate Limit State Equations and Plasticity of Tubular Conical Transitions

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Albert Ku ◽  
Jieyan Chen
Keyword(s):  
Lower Bound ◽  
Edge Effects ◽  
Limit Analysis ◽  
Oil And Gas ◽  
Limit State ◽  
Ultimate Limit State ◽  
Design Standards ◽  
State Equations ◽  
Sharp Stress ◽  
Ultimate Limit

Abstract Conical transitions have wide applications in wind turbine foundation as well as oil and gas jacket type of structures. The junctions where tubular and cone meet experience a sharp stress rise from shell edge effects. Like all structures experiencing sharp stress rises, fatigue considerations are critical. In addition to fatigue, the existing offshore structural design standards also require ultimate limit state checks. It is known from the lower bound theorem of plasticity limit analysis that the junction local edge effects do not impact the global capacity. Designing for the local junction ultimate limit state contains wide variations among existing design standards. In this paper, the design practices from API RP-2A, NORSOK N-004, and ISO 19902:2020 draft are assessed. They are compared to the shell plastic yield criteria of Hodge and Ilyushin. In addition, this paper provides a semi-analytical plasticity solution to determine junction plastic deformations. The formulation is based on cylindrical shell equations coupled with deformation plasticity theory. It is found that the growth of the junction plasticity zone is limited, which is consistent with the anticipation from the lower bound limit analysis theorem. The observations made in this paper show that the local junction plasticity is a secondary issue compared to other design considerations. Its ultimate limit state design equation can afford to be more lenient if chooses for future standards’ development.

scholarly journals Ultimate limit state reliability-based design of augered cast-in-place piles considering lower-bound capacities

2017 ◽  
Vol 54 (12) ◽  
pp. 1693-1703 ◽  
Author(s):  
Seth C. Reddy ◽  
Armin W. Stuedlein
Keyword(s):  
Lower Bound ◽  
Limit State ◽  
Resistance Factor ◽  
Reasonable Assumption ◽  
Ultimate Limit State ◽  
Design Models ◽  
Resistance Factors ◽  
Reliability Based Design ◽  
The Impact ◽  
Ultimate Limit

The use of augered cast-in-place (ACIP) piles for transportation infrastructure requires an appropriate reliability-based design (RBD) procedure. In an effort to improve the accuracy of an existing design model and calibrate appropriate resistance factors, this study presents a significantly revised RBD methodology for estimating the shaft and toe bearing capacity of ACIP piles using a large database consisting of static loading tests in predominately granular soils. The proposed design models are unbiased, as opposed to those currently recommended. Based on the reasonable assumption that a finite lower-bound resistance limit exists, lower-bound design lines are developed for shaft and toe bearing resistance by applying a constant ratio to the proposed design models. Resistance factors are calibrated at the strength or ultimate limit state (ULS) for ACIP piles loaded in compression and tension for two commonly used target probabilities of failure with and without lower-bound limits. For piles loaded in compression, separate resistance factors are calibrated for the proposed shaft and toe bearing resistance models. The inclusion of a lower-bound limit for piles loaded in tension results in a 24%–50% increase in the calibrated resistance factor. For piles loaded in compression, the application of a lower-bound limit results in a 20%–150% increase in the calibrated resistance factor, and represents a significant increase in useable pile capacity. Although the impact of a lower-bound limit on resistance factor calibration is directly dependent on the degree of uncertainty in the distribution of resistance, this effect is outweighed by the type of distribution selected (i.e., normal, lognormal) at more stringent target probabilities of failure due to differences in distribution shape at the location of the lower-bound limit. A companion paper explores the use of the revised ULS model in a reliability-based serviceability limit state design framework.

Combined Reinforced Concrete Columns Strengthening with Steel Clipping and Concrete Surfacing

2021 ◽  
pp. 11-22
Author(s):  
Ю. Г. Москалькова ◽  
С. В. Данилов ◽  
В. А. Ржевуцкая
Keyword(s):  
Reinforced Concrete ◽  
Load Transfer ◽  
Limit State ◽  
Concrete Columns ◽  
Ultimate Limit State ◽  
Concrete Core ◽  
Reinforced Concrete Columns ◽  
Entire Height ◽  
Complex Structural ◽  
Ultimate Limit

Постановка задачи. Исследуется метод усиления железобетонных колонн устройством стальной обоймы с обетонированием, который позволяет восстанавливать эксплуатационные показатели колонн, имеющих значительные дефекты и повреждения. Предпосылкой настоящих исследований явилось предположение о том, что усиление стальной обоймой с обетонированием является эффективным способом повышения несущей способности железобетонных колонн, причем вариант приложения нагрузки - только на бетонное ядро или ко всему сечению - существенно на эффективность усиления не влияет. В связи с этим целью исследования является определение необходимости устройства стального оголовка и включения в работу ветвей стальной обоймы при условии обетонирования стержня колонны по всей высоте. Результаты и выводы. Рациональным признан способ передачи нагрузки только на бетонное ядро усиленных колонн, поскольку устройство оголовка стальной обоймы требует применения сложных конструктивно-технологических решений, но при этом дополнительно увеличивает несущую способность незначительно (согласно проведенным исследованиям менее чем на 10 %). Ввиду отсутствия необходимости устройства конструкций стального оголовка снижаются трудоемкость и сроки производства работ по усилению колонн. Statement of the problem. The method of strengthening reinforced concrete columns with a steel clipping and the concrete surfacing is investigated. This method allows one to repair the columns with significant defects and damage. The prerequisite for this study was the assumption of strengthening with a steel clipping and the concrete surfacing is an effective way to increase the ultimate limit state of reinforced concrete columns, furthermore, the option of applying the load (only to the concrete core or to the entire section) does not significantly affect the strengthening effectiveness. In this regard, the purpose of the investigation was to identify the need to include the steel jacketing in the work, on the condition the column is coated with concrete along with the entire height. Results and conclusions. The load transfer method only to the concrete core of the strengthened columns is recognized as rational since the device of the steel clipping head requires the use of complex structural and technological solutions, but at the same time additionally increases the ultimate limit state insignificantly (according to the studies by less than 10 %). Due to the absence of the need to establish structures of the steel jacketing head, the labor intensiveness and terms of work production on strengthening the columns are reduced.

Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability

2021 ◽  
Author(s):  
Sara Reichenbach ◽  
Benjamin Kromoser ◽  
Philipp Preinstorfer ◽  
Tobias Huber
Keyword(s):  
High Performance ◽  
Construction Material ◽  
Limit State ◽  
Carbon Dioxide Emission ◽  
Resource Consumption ◽  
Ultimate Limit State ◽  
Textile Reinforced Concrete ◽  
Potential Applications ◽  
Application Potential ◽  
Ultimate Limit

<p>With the building industry being one of the main sources of carbon dioxide emission worldwide and concrete being the main construction material, new strategies have to be developed to reduce the carbon footprint thereof. The use of high-performance materials in structural concrete, as for example textile-reinforced concrete (TRC), seems to allow for a reduction of the resource consumption and the carbon emissions. The present paper addresses potential applications of TRC examining the global warming potential (GWP) of a rail platform barrier. The resource consumption is depicted in a parametrical study in terms of the necessary component height and reinforcement area considering both the serviceability limit state (SLS) as well as the ultimate limit state (ULS). The results clearly indicate an achievable reduction of the GWP during construction when using textile reinforcement made of high-performance fibres. Furthermore, an analysis of the European market was conducted to prove the availability of this new reinforcement type. </p>

Sign in / Sign up

Export Citation Format

Share Document