The static contact angle hysteresis and Young's equilibrium contact angle

2006 ◽  
pp. 113-126
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Static Contact Angle ◽  
Equilibrium Contact Angle ◽  
Static Contact

scholarly journals Observation of contact angle hysteresis due to inhomogeneous electric fields

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Wei Wang ◽  
Qi Wang ◽  
Jia Zhou ◽  
Antoine Riaud
Keyword(s):  
Contact Angle ◽  
Free Energy ◽  
Electric Fields ◽  
Contact Angle Hysteresis ◽  
Dynamic Control ◽  
Static Contact Angle ◽  
Chemical Contamination ◽  
Sample Collection ◽  
Droplet Spreading ◽  
Static Contact

AbstractStatic contact angle hysteresis determines droplet stickiness on surfaces, and is widely attributed to surface roughness and chemical contamination. In the latter case, chemical defects create free-energy barriers that prevent the contact line motion. Electrowetting studies have demonstrated the similar ability of electric fields to alter the surface free-energy landscape. Yet, the increase of apparent static contact angle hysteresis by electric fields remains unseen. Here, we report the observation of electrowetting hysteresis on micro-striped electrodes. Unlike most experiments with stripes, the droplet spreading on the substrate is experimentally found to be isotropic, which allows deriving a simple theoretical model of the contact angle hysteresis depending the applied voltage. This electrowetting hysteresis enables the continuous and dynamic control of contact angle hysteresis, not only for fundamental studies but also to manufacture sticky-on-demand surfaces for sample collection.

Dropwise Condensation Underneath Chemically Textured Surfaces: Simulation and Experiments

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
Basant Singh Sikarwar ◽  
Nirmal Kumar Battoo ◽  
Sameer Khandekar ◽  
K. Muralidhar
Keyword(s):  
Contact Angle ◽  
Model Simulation ◽  
Contact Angle Hysteresis ◽  
Saturation Temperature ◽  
Static Contact Angle ◽  
Order Effects ◽  
Textured Surface ◽  
Dropwise Condensation ◽  
Textured Surfaces ◽  
Static Contact

Experimental observations of dropwise condensation of water vapor on a chemically textured surface of glass and its detailed computer simulation are presented. Experiments are focused on the pendant mode of dropwise condensation on the underside of horizontal and inclined glass substrates. Chemical texturing of glass is achieved by silanation using octyl-decyl-tri-chloro-silane (C18H37C13Si) in a chemical vapor deposition process. The mathematical model is built in such a way that it captures all the major physical processes taking place during condensation. These include growth due to direct condensation, droplet coalescence, sliding, fall-off, and renucleation of droplets. The effects arising from lyophobicity, namely, the contact angle variation and its hysteresis, inclination of the substrate, and saturation temperature at which the condensation is carried out, have been incorporated. The importance of higher order effects neglected in the simulation is discussed. The results of model simulation are compared with the experimental data. After validation, a parametric study is carried out for cases not covered by the experimental regime, i.e., various fluids, substrate inclination angle, saturation temperature, and contact angle hysteresis. Major conclusions arrived at in the study are the following: The area of droplet coverage decreases with an increase in both static contact angle of the droplet and substrate inclination. As the substrate inclination increases, the time instant of commencement of sliding of the droplet is advanced. The critical angle of inclination required for the inception of droplet sliding varies inversely with the droplet volume. For a given static contact angle, the fall-off time of the droplet from the substrate is a linear function of the saturation temperature. For a given fluid, the drop size distribution is well represented by a power law. Average heat transfer coefficient is satisfactorily predicted by the developed model.

scholarly journals Thick drops climbing uphill on an oscillating substrate

2018 ◽  
Vol 840 ◽  
pp. 131-153 ◽  
Author(s):  
J. T. Bradshaw ◽  
J. Billingham
Keyword(s):  
Contact Angle ◽  
Contact Line ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Boundary Integral ◽  
Static Contact Angle ◽  
Rise Velocity ◽  
Contact Lines ◽  
Weakly Nonlinear ◽  
Static Contact

Experiments have shown that a liquid droplet on an inclined plane can be made to move uphill by sufficiently strong, vertical oscillations (Brunet et al., Phys. Rev. Lett., vol. 99, 2007, 144501). In this paper, we study a two-dimensional, inviscid, irrotational model of this flow, with the velocity of the contact lines a function of contact angle. We use asymptotic analysis to show that, for forcing of sufficiently small amplitude, the motion of the droplet can be separated into an odd and an even mode, and that the weakly nonlinear interaction between these modes determines whether the droplet climbs up or slides down the plane, consistent with earlier work in the limit of small contact angles (Benilov and Billingham, J. Fluid Mech. vol. 674, 2011, pp. 93–119). In this weakly nonlinear limit, we find that, as the static contact angle approaches $\unicode[STIX]{x03C0}$ (the non-wetting limit), the rise velocity of the droplet (specifically the velocity of the droplet averaged over one period of the motion) becomes a highly oscillatory function of static contact angle due to a high frequency mode that is excited by the forcing. We also solve the full nonlinear moving boundary problem numerically using a boundary integral method. We use this to study the effect of contact angle hysteresis, which we find can increase the rise velocity of the droplet, provided that it is not so large as to completely fix the contact lines. We also study a time-dependent modification of the contact line law in an attempt to reproduce the unsteady contact line dynamics observed in experiments, where the apparent contact angle is not a single-valued function of contact line velocity. After adding lag into the contact line model, we find that the rise velocity of the droplet is significantly affected, and that larger rise velocities are possible.

Study of the Wetting Characteristics of Patterned Silicon Micro Conical Structure

2017 ◽  
Author(s):  
Il Woong Park ◽  
Maria Fernandino ◽  
Carlos Albert Dorao
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Area Fraction ◽  
Static Contact Angle ◽  
Patterned Surfaces ◽  
Wenzel State ◽  
Static Contact ◽  
Wetting Property ◽  
Conical Structure ◽  
Center Distance

Controlling the wetting property of the surface present a major challenge but at the same time, it open the possibility of designing surfaces customized for particular applications. For example, allowing self-cleaning surfaces when the surface presents a hydrophobic state with high static contact angle and low contact angle hysteresis. In this work, the effect on the wetting property of patterned surfaces with Si microcones has been studied. It was observed that the height of the structure and center-to-center distance are controlling the wetting property of the surface. Three different wetting states (Cassie-Baxter state, the Wenzel state, and the sunny-side-up state) and the corresponding transition between the states were observed. A sharp Cassie-Wenzel transition was triggered with decreasing the area fraction of the surface.

scholarly journals Biomimetic Approach for the Elaboration of Highly Hydrophobic Surfaces: Study of the Links between Morphology and Wettability

Biomimetics ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 38
Author(s):  
Quentin Legrand ◽  
Stephane Benayoun ◽  
Stephane Valette
Keyword(s):  
Contact Angle ◽  
Ginkgo Biloba ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Textured Surfaces ◽  
Replication Process ◽  
Wetting Behavior ◽  
Static Contact ◽  
Biomimetic Approach ◽  
Highly Hydrophobic

This investigation of morphology-wetting links was performed using a biomimetic approach. Three natural leaves’ surfaces were studied: two bamboo varieties and Ginkgo Biloba. Multiscale surface topographies were analyzed by SEM observations, FFT, and Gaussian filtering. A PDMS replicating protocol of natural surfaces was proposed in order to study the purely morphological contribution to wetting. High static contact angles, close to 135∘, were measured on PDMS replicated surfaces. Compared to flat PDMS, the increase in static contact angle due to purely morphological contribution was around 20∘. Such an increase in contact angle was obtained despite loss of the nanometric scale during the replication process. Moreover, a significant decrease of the hysteresis contact angle was measured on PDMS replicas. The value of the contact angle hysteresis moved from 40∘ for flat PDMS to less than 10∘ for textured replicated surfaces. The wetting behavior of multiscale textured surfaces was then studied in the frame of the Wenzel and Cassie–Baxter models. Whereas the classical laws made it possible to describe the wetting behavior of the ginkgo biloba replications, a hierarchical model was developed to depict the wetting behavior of both bamboo species.

The Surface Modification with Fluorocarbon Thin Films for the Prevention of Stiction in Mems

1998 ◽  
Vol 518 ◽  
Author(s):  
Sang-Ho Lee ◽  
Myong-Jong Kwon ◽  
Jin-Goo Park ◽  
Yong-Kweon Kim ◽  
Hyung-Jae Shin
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Fluorocarbon Films ◽  
Perfluorodecanoic Acid ◽  
Large Hysteresis ◽  
Static Contact ◽  
Receding Contact ◽  
Highly Hydrophobic ◽  
Receding Contact Angle

AbstractHighly hydrophobic fluorocarbon films were prepared by the vapor phase (VP) deposition method in a vacuum chamber using both liquid (3M's FC40, FC722) and solid sources (perfluorodecanoic acid (CF3(CF2)8COOH), perfluorododecane (C12F26)) on Al, Si and oxide coated wafers. The highest static contact angles of water were measured on films deposited on aluminum substrate. But relatively lower contact angles were obtained on the films on Si and oxide wafers. The advancing and receding contact angle analysis using a captive drop method showed a large contact angle hysteresis (ΔH) on the VP deposited fluorocarbon films. AFM study showed poor film coverage on the surface with large hysteresis. FTIR-ATR analysis positively revealed the stretching band of CF2 groups on the VP deposited substrates. The thermal stability of films was measured at 150°C in air and nitrogen atmospheres as a function of time. The rapid decrease of contact angles was observed on VP deposited FC and PFDA films in air. However, no decrease of contact angle on them was observed in N2.

Sign in / Sign up

Export Citation Format

Share Document